Date: Sat, 21 Oct 2006 18:52:46 -0500 From: Lane <lane@joeandlane.com> To: questions@freebsd.org Subject: Wireless Inspiron 6400 anyone? Message-ID: <200610211852.46359.lane@joeandlane.com>
next in thread | raw e-mail | index | archive | help
Hello, I've a new inspiron 6400 running FreeBSD 6.1 and I can't get Wireless to work. It works on WXP using the Dell WLAN drivers at http://ftp.us.dell.com/network/R115321.EXE I've followed the instructions at http://dannyman.toldme.com/2005/01/05/freebsd-howto-ndisulate-windows-drivers/ but no ndis driver shows up after kldload if_ndis. ifconfig -a looks like: bfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet6 fe80::215:c5ff:feb8:39e%bfe0 prefixlen 64 scopeid 0x1 inet 172.16.1.42 netmask 0xffffff00 broadcast 172.16.1.255 ether 00:15:c5:b8:03:9e media: Ethernet autoselect (100baseTX <full-duplex>) status: active fwe0: flags=108943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 options=8<VLAN_MTU> inet6 fe80::304f:c0ff:fe9c:7541%fwe0 prefixlen 64 scopeid 0x2 inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 ether 32:4f:c0:9c:75:41 ch 1 dma 0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 It seems as if the fwe0 devices wants to be the wireless, as the bfe0 driver is my "wired" ethernet card. pciconf -lv gives vendor and class as "Broadcom" and "network," but does not show the device information, so I'm stumped. hostb0@pci0:0:0: class=0x060000 card=0x01bd1028 chip=0x27a08086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI none0@pci0:2:0: class=0x030000 card=0x01bd1028 chip=0x27a28086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = display subclass = VGA none1@pci0:2:1: class=0x038000 card=0x01bd1028 chip=0x27a68086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = display none2@pci0:27:0: class=0x040300 card=0x01bd1028 chip=0x27d88086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) High Definition Audio' class = multimedia pcib1@pci0:28:0: class=0x060400 card=0x00000040 chip=0x27d08086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) PCI Express Root Port' class = bridge subclass = PCI-PCI pcib2@pci0:28:3: class=0x060400 card=0x00000040 chip=0x27d68086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) PCI Express Root Port' class = bridge subclass = PCI-PCI uhci0@pci0:29:0: class=0x0c0300 card=0x01bd1028 chip=0x27c88086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x01bd1028 chip=0x27c98086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x01bd1028 chip=0x27ca8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci3@pci0:29:3: class=0x0c0300 card=0x01bd1028 chip=0x27cb8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB Universal Host Controller' class = serial bus subclass = USB ehci0@pci0:29:7: class=0x0c0320 card=0x01bd1028 chip=0x27cc8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB pcib3@pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086 rev=0xe1 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x01bd1028 chip=0x27b98086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801GBM (ICH7-M) LPC Interface Controller' class = bridge subclass = PCI-ISA atapci0@pci0:31:2: class=0x010180 card=0x01bd1028 chip=0x27c48086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller' class = mass storage subclass = ATA none3@pci0:31:3: class=0x0c0500 card=0x01bd1028 chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) SMBus Controller' class = serial bus subclass = SMBus none4@pci11:0:0: class=0x028000 card=0x00071028 chip=0x431114e4 rev=0x01 hdr=0x00 vendor = 'Broadcom Corporation' class = network bfe0@pci3:0:0: class=0x020000 card=0x01af1028 chip=0x170c14e4 rev=0x02 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM440x 100Base-TX Fast Ethernet' class = network subclass = ethernet fwohci0@pci3:1:0: class=0x0c0010 card=0x01bd1028 chip=0x08321180 rev=0x00 hdr=0x00 vendor = 'Ricoh Co Ltd' class = serial bus subclass = FireWire none5@pci3:1:1: class=0x080501 card=0x01bd1028 chip=0x08221180 rev=0x19 hdr=0x00 vendor = 'Ricoh Co Ltd' device = 'SD Bus Host Adapter' class = base peripheral none6@pci3:1:2: class=0x088000 card=0x01bd1028 chip=0x08431180 rev=0x01 hdr=0x00 vendor = 'Ricoh Co Ltd' class = base peripheral none7@pci3:1:3: class=0x088000 card=0x01bd1028 chip=0x05921180 rev=0x0a hdr=0x00 vendor = 'Ricoh Co Ltd' device = 'Memory Stick Bus Host Adapter' class = base peripheral none8@pci3:1:4: class=0x088000 card=0x01bd1028 chip=0x08521180 rev=0x05 hdr=0x00 vendor = 'Ricoh Co Ltd' class = base peripheral Any help is appreciated. lane
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200610211852.46359.lane>