Date: Sun, 17 Jun 2007 22:07:47 -0400 From: Byron Campbell <wa4geg@surfbest.net> To: Mark Kirkwood <markir@paradise.net.nz> Cc: freebsd-x11@freebsd.org, freebsd-questions@freebsd.org, freebsd-amd64@freebsd.org Subject: Re: X fails after upgrade to xorg-7.2; FreeBSD AMD64 w/ Radeon 9600 Pro Message-ID: <200706172207.48254.wa4geg@surfbest.net> In-Reply-To: <4675C1DF.9070002@paradise.net.nz> References: <200706171332.13721.wa4geg@surfbest.net> <4675C1DF.9070002@paradise.net.nz>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 17 June 2007 7:21:03 pm Mark Kirkwood wrote: > Byron Campbell wrote: > > Help, X was working just fine until I did a portupgrade > > of xorg 6.9.0 to 7.2. > > > > Looks like X is starting but my LCD monitor just goes > > black with the monitor's OSD reporting "video input, out > > of range". > > > > I've gone back through Xorg configuration > > (via "xorgcfg -textmode") and verified correct settings > > for my graphics card and the monitor's Horz. / Vert. scan > > frequencies etc., everything being in order. > > > > #Xorg -configure gives Driver "ati", Boardname "RV350 AP > > [Radeon 9600]" and BusID "PCI:1:0:0" > > > > I've also run #xorgcfg -textmode choosing Driver "radeon" > > and Card "** ATI Radeon (generic).." and still no luck. > > > > Please help. Anyone have their Radeon 9600 card working > > in Xorg-7.2 with just a basic / non accelerated setup, or > > any setup? > > > > Thanks, > > Byron > > > > > > System info: > > > > FreeBSD 6.2 stable (AMD64) > > Graphics card: ATI Radeon 9600 Pro (using the VGA > > monitor connection jack) > > Mainboard: MSI KT8 Neo2-F > > I've seen this with VGA connections - e.g I've a 9550 > (RV350 AS) and for DVI connection it works fine with the > file generated by 'Xorg -configure' with accel and drm, but > with VGA fails with 'out of range'. I needed to tell it > which display resolution to use by adding a 'Modes' clause > to the "Display" subsection of xorg.conf e.g: > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "1680x1050" # whatever mode your monitor uses here > EndSubSection > EndSection > > > Cheers > > Mark Thanks for the suggestion Mark. I do have the modes entered, and even set it to the single mode of "1280x1024" but no luck. I went back and ran Xorg -configure again, and noted the following error messages: dlopen: /usr/local/lib/xorg/modules/drivers//atimisc_drv.so: Undefined symbol "ATIMemoryTypeNames_88800CX" (EE) Failed to load /usr/local/lib/xorg/modules/drivers//atimisc_drv.so (EE) Failed to load module "atimisc" (loader failed, 7) (++) Using config file: "/root/xorg.conf.new" (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found (**) RADEON(0) : RADEONPreInit atimisc_drv.so is present in the above mentioned directory. My graphics card is the PowerColor ATI Radeon 9600 Pro (RV350 AP) Byron
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200706172207.48254.wa4geg>