Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 30 Apr 1997 12:46:55 -0400 (EDT)
From:      "John W. DeBoskey" <jwd@unx.sas.com>
To:        freebsd-current@freebsd.org, freebsd-smp@freebsd.org
Subject:   Adaptec AIC-7880 Ultra/Ultra W problems
Message-ID:  <199704301647.AA18235@iluvatar.unx.sas.com>

next in thread | raw e-mail | index | archive | help
Hi,

   As the subject says, I'm having problems with the 7880 onboard
scsi controller. I am running 3.0-CURRENT as of Monday, April 28.
I am running an SMP kernel, without the additional CPU's 
activated.

   When doing heavy i/o the following messages appear on the console,
followed by the machine locking up. I've run with the adapter in
both wide/ultra wide mode with the same results. The drives are
WD 4.3GB, Single-ended Ultra Fast Wide SCSI-3. The disconnnect
option is on.

   Any ideas on how to approach this problem are greatly
appreciated.

Thanks,
John

ps: If this is the 2940 problem, I'll be more than happy to test
    any patches.


These are typed in by hand so any typos are mine. 
------------------------------------------------------------------
sd1: SCB 0x1 - timed out in message out phase, SCSISIGI == 0xb6
SEQADDR = 0x47 SCSISEQ = 0x12 SSTAT0 = 0x7 SSTAT1 = 0x3
sd1: abort message in buffer
sd1: SCB 0 - Abort Completed
sd1: no longer in timeout
sd1: SCB 0xd - timed out while idle, LASTPHASE == 0x1, SCSISIGI = 0x0
SEQADDR = 0xd SCSISEQ = 0x12  SSTAT0 = 0x5 SSTAT1 = 0x2
sd1: Queueing an Abort SCB
sd1: Abort Message Sent
sd1: SCB 0x0 - timed out in message out phase, SCSISIGI == 0xb6
SEQADDR = 0x47 SCSISEQ = 0x12 SSTAT0 = 0x7 SSTAT1 = 0x3


   The above sequence repeats many times. The dmesg output for my
machine follows:


Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Mon Apr 28 12:46:53 EST 1997
    root@magenta.pc.sas.com:/usr/src/sys/compile/FOURWAY
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id: 0, version: 0x00040011
 cpu1 (AP):  apic id: 4, version: 0x00040011
 cpu2 (AP):  apic id: 1, version: 0x00040011
 cpu3 (AP):  apic id: 2, version: 0x00040011
 io0 (APIC): apic id: 14, version: 0x000f0011
CPU: Pentium Pro (686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping=9
  Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,<b11>,MTRR,PGE,MCA,CMOV>
real memory  = 134217728 (131072K bytes)
avail memory = 129470464 (126436K bytes)
bdevsw_add_generic: adding D_DISK flag for device 16
eisa0: <INT31c0 (System Board)>
Probing for devices on the EISA bus
Probing for devices on PCI bus 0:
chip0 <Intel 82375EB PCI-EISA bridge> rev 5 on pci0:14:0
pci0:15:0: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned]
pci0:15:1: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned]
pci0:15:2: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned]
pci0:15:3: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned]
pci0:15:4: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned]
pci0:15:5: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned]
pci0:15:6: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned]
pci0:15:7: Intel Corporation, device=0x0008, class=0xff, subclass=0x00 [no driver assigned]
chip1 <Intel 82454GX (Orion) host to PCI bridge> rev 5 on pci0:20:0
chip2 <Intel 82450KX (Orion) PCI memory controller> rev 6 on pci0:25:0
chip3 <Intel 82450KX (Orion) PCI memory controller> rev 6 on pci0:26:0
Probing for devices on PCI bus 1:
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 1 int a irq 10 on pci1:10:0
fxp0: Ethernet address 00:a0:c9:2d:14:34
ahc0 <Adaptec aic7880 Ultra SCSI host adapter> rev 0 int a irq 11 on pci1:11:0
ahc0: Using left over BIOS settings
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
sd0 at scbus0 target 0 lun 0
sd0: <SEAGATE ST51080N 0958> type 0 fixed SCSI 2
sd0: Direct-Access 1030MB (2109840 512 byte sectors)
cd0 at scbus0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:462 1.14> type 5 removable SCSI 2
cd0: CD-ROM can't get the size
ahc1 <Adaptec aic7880 Ultra SCSI host adapter> rev 0 int a irq 10 on pci1:12:0
ahc1: Using left over BIOS settings
ahc1: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc1: waiting for scsi devices to settle
scbus1 at ahc1 bus 0
sd1 at scbus1 target 0 lun 0
sd1: <WDIGTL WDE4360-1808A1 1.70> type 0 fixed SCSI 2
sd1: Direct-Access 4095MB (8388314 512 byte sectors)
sd2 at scbus1 target 1 lun 0
sd2: <WDIGTL WDE4360-1808A1 1.70> type 0 fixed SCSI 2
sd2: Direct-Access 4095MB (8388314 512 byte sectors)
sd3 at scbus1 target 2 lun 0
sd3: <WDIGTL WDE4360-1808A1 1.70> type 0 fixed SCSI 2
sd3: Direct-Access 4095MB (8388314 512 byte sectors)
sd4 at scbus1 target 3 lun 0
sd4: <WDIGTL WDE4360-1808A1 1.70> type 0 fixed SCSI 2
sd4: Direct-Access 4095MB (8388314 512 byte sectors)
sd5 at scbus1 target 4 lun 0
sd5: <WDIGTL WDE4360-1808A1 1.70> type 0 fixed SCSI 2
sd5: Direct-Access 4095MB (8388314 512 byte sectors)
sd6 at scbus1 target 5 lun 0
sd6: <WDIGTL WDE4360-1808A1 1.70> type 0 fixed SCSI 2
sd6: Direct-Access 4095MB (8388314 512 byte sectors)
uk0 at scbus1 target 6 lun 0
uk0: <DELL 6UW BACKPLANE 7> type 3 fixed SCSI 2
uk0: Unknown 
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found
mse0 not found at 0x23c
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: device ID 0, 2 buttons
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
scd0 not found at 0x230
npx0 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
changing root device to sd0a
Enabled INTs: 1, 2, 3, 4, 6, 7, 8, 10, 11, 12, imen: 0x00ffe221
WARNING: / was not properly dismounted.
SMP: All idle procs online.

-- 
jwd@unx.sas.com       (w) John W. De Boskey          (919) 677-8000 x6915



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199704301647.AA18235>