Date: Thu, 14 Dec 2000 03:04:29 +0100 (CET) From: Jan Riedinger <jan@physik.TU-Berlin.DE> To: freebsd-isdn@freebsd.org Subject: Urgent: Trouble installing AVM Fritz!Card PCI Message-ID: <200012140204.DAA65499@rosa.physik.TU-Berlin.DE>
next in thread | raw e-mail | index | archive | help
I can't get running a new AVM Fritz!Card PCI under FreeBSD R4.2.
At startup (dmesg) I get
isic0: <AVM Fritz!Card PCI> at device 10.0 on pci0
avma1pp0: couldn't map IO port
device_probe_and_attach: isic0 attach returned 6
.
.
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
.
.
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
.
i4bisppp: 4 ISDN SyncPPP device(s) attached
IPv6 packet filtering initialized, unlimited logging
i4b: ISDN call control device attached
.
.
device_probe_and_attach: isic0 attach returned 6
isic0: <AVM Fritz!Card PCI> at device 10.0 on pci0
avma1pp0: couldn't map IO port
device_probe_and_attach: isic0 attach returned 6
As expected the trial to start isdnd fails:
Dec 14 08:55:09 server isdnd[310]: ERR init_controller: no ISDN controller found!
Dec 14 08:55:09 server isdnd[310]: DMN daemon terminating, exitval = 1
What's going on? What could be wrong? It's a system with an Asus A7V
mainbord. The same card is running fine on an other system with almost the
same kernel configuration under R4.0. You can find the complete dmesg output
below.
Because I have to deliever the system at Friday far away from me and I urgently
need remote access I would be very thankful, if someone could give me a hint quickly.
Thank you very much
Jan
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Thu Dec 14 04:59:23 CET 2000
root@nw:/usr/src/sys/compile/WITTMANN
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (756.74-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x630 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 134135808 (130992K bytes)
avail memory = 126390272 (123428K bytes)
Preloaded elf kernel "kernel" at 0xc0423000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 9
pci0: <VIA 83C572 USB controller> at 4.3 irq 9
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9400-0x947f mem 0xe1000000-0xe100007f irq 9 at device 9.0 on pci0
xl0: Ethernet address: 00:01:02:f0:97:03
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isic0: <AVM Fritz!Card PCI> at device 10.0 on pci0
avma1pp0: couldn't map IO port
device_probe_and_attach: isic0 attach returned 6
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x8800-0x88ff mem 0xe0000000-0xe0000fff irq 11 at device 12.0 on pci0
aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs
atapci1: <Promise ATA100 controller> port 0x7000-0x703f,0x7400-0x7403,0x7800-0x7807,0x8000-0x8003,0x8400-0x8407 mem 0xdf800000-0xdf81ffff irq 10 at device 17.0 on pci0
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
DUMMYNET initialized (000608)
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
i4bisppp: 4 ISDN SyncPPP device(s) attached
IPv6 packet filtering initialized, unlimited logging
i4b: ISDN call control device attached
BRIDGE 990810, have 18 interfaces
-- index 1 type 6 phy 0 addrl 6 addr 00.01.02.f0.97.03
IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled
ad0: 78167MB <Maxtor 98196H8> [158816/16/63] at ata0-master UDMA66
ad1: 78167MB <Maxtor 98196H8> [158816/16/63] at ata0-slave UDMA66
ad2: 78167MB <Maxtor 98196H8> [158816/16/63] at ata1-master UDMA66
ad3: 78167MB <Maxtor 98196H8> [158816/16/63] at ata1-slave UDMA66
Waiting 2 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <TANDBERG TDC 4222 =07:> Removable Sequential Access SCSI-2 device
sa0: 3.300MB/s transfers
sa1 at ahc0 bus 0 target 5 lun 0
sa1: <QUANTUM DLT7000 3213> Removable Sequential Access SCSI-2 device
sa1: 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
Mounting root from ufs:/dev/ad0s1a
vinum: loaded
vinum: reading configuration from /dev/ad3s1g
vinum: updating configuration from /dev/ad3s1f
vinum: updating configuration from /dev/ad3s1e
vinum: updating configuration from /dev/ad2s1g
vinum: updating configuration from /dev/ad2s1e
vinum: updating configuration from /dev/ad2s1f
vinum: updating configuration from /dev/ad1s1f
vinum: updating configuration from /dev/ad1s1e
vinum: updating configuration from /dev/ad1s1d
vinum: updating configuration from /dev/ad0s1f
vinum: updating configuration from /dev/ad0s1e
vinum: updating configuration from /dev/ad0s1d
ipr0: not multicast capable, IPv6 not enabled
ipr1: not multicast capable, IPv6 not enabled
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 9 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isic0: <AVM Fritz!Card PCI> at device 10.0 on pci0
avma1pp0: couldn't map IO port
device_probe_and_attach: isic0 attach returned 6
isic0: <AVM Fritz!Card PCI> at device 10.0 on pci0
avma1pp0: couldn't map IO port
device_probe_and_attach: isic0 attach returned 6
cd0 at ahc0 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-ROM PX-40TS 1.11> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200012140204.DAA65499>