Date: Wed, 7 Jul 2010 11:02:06 -0700 From: Jack Vogel <jfvogel@gmail.com> To: Mike Tancsa <mike@sentex.net> Cc: freebsd-net@freebsd.org, Shtorm <admin@shtorm.com> Subject: Re: Intel 82574L Gigabit Ethernet Controller Message-ID: <AANLkTinhAVTf_4vKlnVJj-A8vZMmZDCtGZLqa82wyoVp@mail.gmail.com> In-Reply-To: <201007071718.o67HIeFY032809@lava.sentex.ca> References: <1278330234.10826.18.camel@stormi-desktop> <AANLkTinePfVRKHdd5FHXEA1YXW9NvDo8mz48hoBgkZ9c@mail.gmail.com> <1278356796.10826.35.camel@stormi-desktop> <AANLkTilVYjuRGtE3gtcRhxIS4FBEAkiBqEPcxCgBh2Hk@mail.gmail.com> <1278404933.20433.26.camel@stormi-desktop> <AANLkTildoiVeA47P47wo027BI5NlppOCNgrV56O-cGaW@mail.gmail.com> <1278496982.21743.50.camel@stormi-desktop> <201007071336.o67DaaNZ031733@lava.sentex.ca> <AANLkTimJXKSm0tTljQx-csIId5NcuQme0fTU-Os-uIMn@mail.gmail.com> <201007071718.o67HIeFY032809@lava.sentex.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
LOL, figures. The poor FreeBSD engineer never gets the new toys :( I asked and my tester has actually had one of these, so if needed I imagine I can lay my hands on one. Jack On Wed, Jul 7, 2010 at 10:18 AM, Mike Tancsa <mike@sentex.net> wrote: > At 12:22 PM 7/7/2010, Jack Vogel wrote: > >> Interesting, didn't know any vendor had combined PCH and 82574 on one >> board, yes, they are >> completely different, as you can see the one only supports MSI, its a >> client NIC. >> > > Its one of the lesser known vendors, Intel ;-) Its a S3420GPLC > > < > http://www.intel.com/Products/Server/Motherboards/S3420GP/S3420GP-specifications.htm > > > http://www.intel.com/Products/Server/Motherboards/S3420GP/S3420GP-specifications.htm > > ---Mike > > > > > > I would agree with Mike, disable anything having to do with IPMI if it >> exists and see if that >> helps. Also you did not comment on the flow control setting, how about >> turning that on? >> >> Jack >> >> >> On Wed, Jul 7, 2010 at 6:36 AM, Mike Tancsa <<mailto:mike@sentex.net> >> mike@sentex.net> wrote: >> At 06:03 AM 7/7/2010, Shtorm wrote: >> >> > Yow, 30 vlans, but only em1 is using vlans not em0? >> > >> > Is only em1 having watchdogs? I noticed you appear to >> > have flow control off, maybe turning it on would help. >> > >> > I would like to see the log messages from the watchdogs. >> > Jack >> >> Yes, em0 - plain untagged traffic to border router, em1 - tagged - one >> vlan per 200-300 pppoe clients. Anyway, I saw watchdogs on em0 too, >> there is no logs for it because remote syslog server connected via em0 >> and it looses messages during card reset, will enable local logs to get >> some info. >> >> >> I only have one board that has a pair of these NICs, but I noticed that in >> the BIOS, there is an option to enable or disable the Option ROM to do >> things like WOL, some sort of IPMI and other functions / features I am not >> familiar with and dont use. >> >> >> | |ROM for the onboard >> | >> | Maximize Memory below [Disabled] |network controllers. >> | >> | Memory Mapped I/O abo [Disabled] |Warning: If >> [Disabled] | >> | Onboard Video [Enabled] |is selected, NIC2 >> can | >> | Dual Monitor Video [Disabled] |not be used to boot >> or | >> | Onboard NIC1 ROM [Enabled] |wake the system. >> | >> | Onboard NIC2 ROM [Enabled] | >> | >> | Onboard NIC iSCSI ROM [Disabled] | >> | >> | | | >> | NIC1 MAC Address 001517C84B98 |>< Select Screen >> | >> | NIC2 MAC Address 001517C84B99 |^v Select Item >> | >> | |+/- Change Value >> | >> >> If you have such features, perhaps try disabling them in the BIOS ? >> >> On mine, the two nics dont come up the same... Not sure if their >> capabilities are the same even ? >> >> em2@pci0:0:25:0: class=0x020000 card=0x34ec8086 chip=0x10ef8086 >> rev=0x05 hdr=0x00 >> vendor = 'Intel Corporation' >> class = network >> subclass = ethernet >> cap 01[c8] = powerspec 2 supports D0 D3 current D0 >> cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message >> cap 13[e0] = PCI Advanced Features: FLR TP >> >> >> em3@pci0:3:0:0: class=0x020000 card=0x34ec8086 chip=0x10d38086 rev=0x00 >> hdr=0x00 >> >> vendor = 'Intel Corporation' >> device = 'Intel 82574L Gigabit Ethernet Controller (82574L)' >> class = network >> subclass = ethernet >> cap 01[c8] = powerspec 2 supports D0 D3 current D0 >> cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message >> cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1) >> cap 11[a0] = MSI-X supports 5 messages in map 0x1c >> >> em2: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x3040-0x305f mem >> 0xb1b00000-0xb1b1ffff,0xb1b25000-0xb1b25fff irq 16 at device 25.0 on pci0 >> em2: Using MSI interrupt >> em2: [FILTER] >> em2: Ethernet address: 00:15:17:c8:4b:99 >> >> em3: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x1000-0x101f mem >> 0xb1900000-0xb191ffff,0xb1920000-0xb1923fff irq 16 at device 0.0 on pci3 >> em3: Using MSI interrupt >> em3: [FILTER] >> em3: Ethernet address: 00:15:17:c8:4b:98 >> >> >> ---Mike >> >> >> -------------------------------------------------------------------- >> Mike Tancsa, tel +1 519 651 3400 >> Sentex Communications, <mailto:mike@sentex.net>mike@sentex.net >> Providing Internet since 1994 <http://www.sentex.net>; >> www.sentex.net >> Cambridge, Ontario Canada < >> http://www.sentex.net/mike>www.sentex.net/mike >> >> > -------------------------------------------------------------------- > Mike Tancsa, tel +1 519 651 3400 > Sentex Communications, mike@sentex.net > Providing Internet since 1994 www.sentex.net > Cambridge, Ontario Canada www.sentex.net/mike > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTinhAVTf_4vKlnVJj-A8vZMmZDCtGZLqa82wyoVp>