Date: Tue, 14 Oct 2014 08:19:43 -0700 From: Ed Hudson <elhosots@gmail.com> To: freebsd-questions@freebsd.org Subject: PNY 128GBY usb key - cam error Message-ID: <CAJSeBeBw1McsT5hUSFmWhLAz6h4TXYVtM1T_-z4QNooYChVs2w@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
a recent PNY 128GBY usb flash drive. loads under linux, but freebsd CAM has errors. any suggestions on how to debug ? thanks! ugen0.4: <PNY Technologies> at usbus0 umass0: <PNY Technologies USB 3.0 FD, class 0/0, rev 2.10/1.00, addr 4> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:4:0:-1: Attached to scbus4 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed (probe0:umass-sim0:0:0:0): Error 5, Unretryable error (da0:umass-sim0:0:0:0): got CAM status 0x50 (da0:umass-sim0:0:0:0): fatal error, failed to attach to device (da0:umass-sim0:0:0:0): lost device - 0 outstanding, 5 refs (da0:umass-sim0:0:0:0): removing device entry ugen0.4: <PNY Technologies> at usbus0 (disconnected) umass0: at uhub2, port 4, addr 4 (disconnected) system: FreeBSD m4.spnet 9.2-STABLE FreeBSD 9.2-STABLE #5: Wed Oct 2 13:04:32 PDT 2013 root@m4:/usr/obj/usr/src/sys/GENERIC amd64 ex similar result under 10.0-RELEASE: ugen0.3: <PNY Technologies> at usbus0 umass0: <PNY Technologies USB 3.0 FD, class 0/0, rev 3.00/1.00, addr 2> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:3:0:-1: Attached to scbus3 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed (probe0:umass-sim0:0:0:0): Error 5, Unretryable error (da0:umass-sim0:0:0:0): got CAM status 0x50 (da0:umass-sim0:0:0:0): fatal error, failed to attach to device FreeBSD m24.spnet 10.0-RELEASE-p9 FreeBSD 10.0-RELEASE-p9 #0: Mon Sep 15 14:35:52 UTC 2014 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 under ubuntu 14.04: [534179.760526] usb 1-2: new high-speed USB device number 7 using ehci-pci [534179.894289] usb 1-2: New USB device found, idVendor=154b, idProduct=00b2 [534179.894306] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [534179.894316] usb 1-2: Product: USB 3.0 FD [534179.894324] usb 1-2: Manufacturer: PNY Technologies [534179.894332] usb 1-2: SerialNumber: AD5E81C52E654207BACD560318E0F7 [534179.895921] usb-storage 1-2:1.0: USB Mass Storage device detected [534179.897067] scsi10 : usb-storage 1-2:1.0 [534182.235086] scsi 10:0:0:0: Direct-Access PNY USB 3.0 FD PQ: 0 ANSI: 6 [534182.236316] sd 10:0:0:0: Attached scsi generic sg2 type 0 [534182.238330] sd 10:0:0:0: [sdc] 245235199 512-byte logical blocks: (125 GB/116 GiB) [534182.240031] sd 10:0:0:0: [sdc] Write Protect is off [534182.240053] sd 10:0:0:0: [sdc] Mode Sense: 43 00 00 00 [534182.241142] sd 10:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [534182.262407] sdc: sdc1 [534182.266881] sd 10:0:0:0: [sdc] Attached SCSI removable disk
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJSeBeBw1McsT5hUSFmWhLAz6h4TXYVtM1T_-z4QNooYChVs2w>