Date: Fri, 15 Dec 2000 12:59:58 -0800 (PST) From: Philip Hallstrom <philip@adhesivemedia.com> To: freebsd-questions@freebsd.org Subject: Problems with cdburning using cdrecord (used to work, doesn't now) Message-ID: <Pine.BSF.4.21.0012151249060.11465-100000@oddjob.adhesivemedia.com>
next in thread | raw e-mail | index | archive | help
Hi - I have a Plextor PX-W12432Te (12/4/32) external SCSI burner hooked up to FreeBSD 4.1-STABLE. I've burned several CD's, but now I can't get it to work at all. When I use cdrecord to write to a disc, I get the following (after some initial output, the below repeats until timeout): Executing 'test unit ready' command on Bus 0 Target 4, Lun 0 timeout 40s CDB: 00 00 00 00 00 00 cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 40s When I use cdda2wav to read from an audio disc, I get the following (after some initial output, the below repeats until timeout): Executing 'test unit ready' command on Bus 0 Target 4, Lun 0 timeout 300s CDB: 00 00 00 00 00 00 cdda2wav: Input/output error. test unit ready: scsi sendcmd: retryable error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 09 01 00 00 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 300s The inquire/checkdrive/eject stuff seems to be fine, freebsd sees the drive on bootup, I and it used to all work. I can't mount_cd9660 a cd either... The other odd thing is that the "write" light blinks when I do either of these... even after I've cancelled (or it times out) the command. Ejecting the cd stops it. Is the drive hosed? Thanks! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0012151249060.11465-100000>