Date: Sun, 1 Nov 2009 10:30:29 -0600 From: "Weldon Godfrey" <wgodfrey@ena.com> To: <FreeBSD-gnats-submit@FreeBSD.org>, <freebsd-amd64@FreeBSD.org>, <freebsd-current@freebsd.org> Subject: RE: amd64/140067: [boot] 8.0-RC2 from ISO, after install, hangs on boot right before loader Message-ID: <A7B0A9F02975A74A845FE85D0B95B8FA0F80069D@misex01.ena.com> In-Reply-To: <200910290330.n9T3U1WZ055689@freefall.freebsd.org> References: Your message of Thu, 29 Oct 2009 03:28:50 GMT<200910290328.n9T3SoGC018607@www.freebsd.org> <200910290330.n9T3U1WZ055689@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I went ahead and tested booting 8.0-RC2 in the Dell with the Perc5/I and a spare 3ware card, it booted Ok, I swapped the computers around, this would mean I would try to boot with our 3ware controller and with our drive chasis attached and using the Perc5/I, it hung at "-" after boot manager again. I disconnected the drive chasis (we have two SAS chasis with a total of 24 drive). It booted. I had thought I tried this before bit this time it worked. I tried just attaching 1 chasis and 12 drives. It locked up at the "-" again I went into the 3ware controller and disabled the ability to boot from the 3ware card (we don't need to boot from it anyway), and with both chasis attached, it worked. We went ahead and went back to the computer with a PERC6/I controller and it worked with the 3ware BIOS set not able to boot. So it appears, that something has happened during the boot/loader process in 8.0-RC2 that doesn't like the 3ware controller advertising its drives as bootable. This ticket is attached to amd64 but that was my mistake. This problem happens pre-kernel. Let me know if someone can change the category of if you prefer for me to submit a new PR. Thanks!!! Weldon =20 -----Original Message----- From: FreeBSD-gnats-submit@FreeBSD.org [mailto:FreeBSD-gnats-submit@FreeBSD.org]=20 Sent: Wednesday, October 28, 2009 10:30 PM To: Weldon Godfrey Subject: Re: amd64/140067: [boot] 8.0-RC2 from ISO, after install, hangs on boot right before loader Thank you very much for your problem report. It has the internal identification `amd64/140067'. The individual assigned to look at your report is: freebsd-amd64.=20 You can access the state of your problem report at any time via this link: http://www.freebsd.org/cgi/query-pr.cgi?pr=3D140067 >Category: amd64 >Responsible: freebsd-amd64 >Synopsis: [boot] 8.0-RC2 from ISO, after install, hangs on boot right before loader >Arrival-Date: Thu Oct 29 03:30:01 UTC 2009
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A7B0A9F02975A74A845FE85D0B95B8FA0F80069D>