From owner-freebsd-questions@FreeBSD.ORG Fri Jun 10 07:19:35 2005 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5E1C516A41C for ; Fri, 10 Jun 2005 07:19:35 +0000 (GMT) (envelope-from bernhard.fischer@fh-stpoelten.ac.at) Received: from mail.fh-stpoelten.ac.at (mail.fh-stpoelten.ac.at [195.202.148.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3192243D5D for ; Fri, 10 Jun 2005 07:19:33 +0000 (GMT) (envelope-from bernhard.fischer@fh-stpoelten.ac.at) Received: from localhost (localhost [127.0.0.1]) by mail.fh-stpoelten.ac.at (Mailservices FH St. Poelten) with ESMTP id 087251805D for ; Fri, 10 Jun 2005 09:19:32 +0200 (CEST) Received: from mail.fh-stpoelten.ac.at ([127.0.0.1]) by localhost (mail [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 19564-02 for ; Fri, 10 Jun 2005 09:19:30 +0200 (CEST) Received: from lbfiser.fh-intern.ac.at (fwint.fh-stpoelten.ac.at [195.202.148.13]) by mail.fh-stpoelten.ac.at (Mailservices FH St. Poelten) with ESMTP id 513921802E for ; Fri, 10 Jun 2005 09:19:30 +0200 (CEST) From: Bernhard Fischer Organization: FH St. Poelten To: freebsd-questions@freebsd.org Date: Fri, 10 Jun 2005 09:23:21 +0200 User-Agent: KMail/1.7.2 MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart22372329.DFh72d3GgC"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200506100923.28669.bernhard.fischer@fh-stpoelten.ac.at> X-Virus-Scanned: by amavisd-new at fh-stpoelten.ac.at Subject: Can't get running an AIT-50 tape drive in an CL-380 server X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 10 Jun 2005 07:19:35 -0000 --nextPart22372329.DFh72d3GgC Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hy, I'm running FreeBSD 4.11 on a Compaq CL-380 Server. It has an internal Smar= t=20 Array Controller from which I successfully boot the system, and an AIT-50=20 tape drive which I intended to use for backups. Also the externel=20 RAID-Controller works fine. Unfortunately I'm unable to get this tape drive working. I think the kernel= =20 not even does detect it. I put in an empty tape and try to get information: naxos# mt status mt: /dev/nsa0: Device not configured I tried to find some hints on the web but it was not successful. Does anybody have a suggestion what I could do? thanx, bh Here's also the dmesg output and my kernel configuration: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 4.11-STABLE #1: Fri Jun 10 08:36:40 CEST 2005 lbfiser@naxos.fh-intern.ac.at:/usr/src/sys/compile/BH20050609 Timecounter "i8254" frequency 1193182 Hz CPU: Intel Pentium III (996.85-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x686 Stepping =3D 6 Features=3D0x383f9ff real memory =3D 536854528 (524272K bytes) avail memory =3D 519008256 (506844K bytes) Preloaded elf kernel "kernel" at 0xc034d000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 ida0: port 0x2000-0x20ff mem=20 0xc4000000-0xc4ffffff,0xc5000000-0xc5ffffff irq 15 at device 1.0 on pci0 ida0: drives=3D1 firm_rev=3D1.42 idad0: on ida0 idad0: 17359MB (35553120 sectors), blocksize=3D512 fxp0: port 0x2400-0x243f mem=20 0xc3e00000-0xc3efffff,0xc3fff000-0xc3ffffff irq 5 at device 2.0 on pci0 fxp0: Disabling dynamic standby mode in EEPROM fxp0: New EEPROM ID: 0x40e0 fxp0: EEPROM checksum @ 0xff: 0x8510 -> 0x8510 fxp0: Ethernet address 00:02:a5:87:8f:e1 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: at 3.0 pci0: (vendor=3D0x0e11, dev=3D0xa0f0) at 4.0 fxp1: port 0x2c00-0x2c3f mem=20 0xc3c00000-0xc3cfffff,0xc3dfd000-0xc3dfdfff irq 5 at device 5.0 on pci0 fxp1: Ethernet address 00:02:a5:3f:24:ff inphy1: on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: at device 15.0 on pci0 isa0: on isab0 atapci0: port 0x2c40-0x2c4f at device= =20 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcib3: on motherboard pci3: on pcib3 sym0: <896> port 0x3000-0x30ff mem 0xc6ffc000-0xc6ffdfff,0xc6fffc00-0xc6fff= fff=20 irq 10 at device 4.0 on pci3 sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym1: <896> port 0x3400-0x34ff mem 0xc6ff8000-0xc6ff9fff,0xc6ffbc00-0xc6ffb= fff=20 irq 11 at device 4.1 on pci3 sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking eisa0: on motherboard mainboard0: on eisa0 slot 0 orm0: