Date: Sat, 02 Jan 2016 18:34:32 +0000 From: Anant Kamath <kamathanant@gmail.com> To: Aleksandr Rybalko <ray@ddteam.net>, Adrian Chadd <adrian.chadd@gmail.com> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: [RT5350] Unable to login on an HLK-RM04 Message-ID: <CAH0miJAS3nfdVz-D0RyZ8oE7dbfJbhQWVxhvpfKi4JHK92q%2B0w@mail.gmail.com> In-Reply-To: <20151228221028.068b5baa6fb876d20821d338@ddteam.net> References: <CAH0miJALwjxDGBYn2g6spzmHXAzWSFq-3vVU0%2By8vxu__f-Wkg@mail.gmail.com> <CAH0miJCEt%2B%2B0MvOPqkEbKRkGzha9VKeQqwW538jRb7eW1%2BE7Wg@mail.gmail.com> <CAJ-VmokOFHaK7EbBwwQHKwop-QJSh%2Be8Bj3qHYs38zVMu2VwUg@mail.gmail.com> <20151228221028.068b5baa6fb876d20821d338@ddteam.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, This is resolved. I managed to login via the serial console and also via telnet. Turns out I was not using the build scripts correctly. <https://github.com/freebsd/freebsd-wifi-build/issues/71#issuecomment-168409224>; Thank you Adrian and Aleksandr for your help. Cheers, Anant On Tue, Dec 29, 2015 at 1:41 AM Aleksandr Rybalko <ray@ddteam.net> wrote: > On Sun, 27 Dec 2015 09:37:13 -0800 > Adrian Chadd <adrian.chadd@gmail.com> wrote: > > > I'm on that today. > > > > please file bugs for both of those (can't login, and incorrect console > device.) > > > > > > -a > > I'm not sure how it done in Adrian's build, but I fix that problem few > weeks ago for zrouter.org: > http://hg.zrouter.org/hg/zrouter/rev/18651f8c0b45 > > Anant, please take a look, if it helps you too. > > > > > > > On 27 December 2015 at 04:31, Anant Kamath <kamathanant@gmail.com> > wrote: > > > Changing /etc/ttys to use ttyu1 instead of ttyu0 makes the login prompt > > > work (it gets displayed). > > > > > > However, no username seems to be valid. (I tried root, user) > > > > > > Configuring /etc/ttys to autologin like this: > > > > > > ttyu1 "/usr/libexec/getty al.57600" vt100 on > secure > > > > > > also fails. (It results in an infinited failed login loop) > > > > > > After fixing the network settings in the image (to use rt0 instead of > > > arge0, and enabling the if_bridge device in the kernconf), I can now > > > connect via telnet, but telnet too rejects the credentials (login: > user, > > > blank password; login: root, blank password; login: root, password:root > > > fails) > > > > > > ( New boot message: http://pastebin.com/qYcBR0bq ) > > > > > > I think this is now more an issue that I should post here: > > > https://github.com/freebsd/freebsd-wifi-build > > > but I welcome any help if I'm missing something really obvious. > > > > > > Regards, > > > Anant > > > > > > > > > > > > On Sun, Dec 27, 2015 at 3:52 PM Anant Kamath <kamathanant@gmail.com> > wrote: > > > > > >> Hi, > > >> > > >> I was trying to get FreeBSD to work on a HiLink HLK-RM04 which has a > > >> RT5350 SoC (and 32MB RAM, 8MB Flash) for the past couple of weeks in > my > > >> free time. OpenWRT has so far worked splendidly on this. > > >> > > >> I had tried the RT305X kernel (which booted after removing the BOOTP > > >> options) but couldn't get my mfsroot image to mount. > > >> > > >> Then I was genuinely surprised when a new RT5350 conf and other bits > got > > >> added just a couple of days ago (and then I found this mailing list > and the > > >> other threads about it). > > >> > > >> So I tried the new kernconf (configured with MFS_IMAGE and > > >> GEOM_UNCOMPRESS) with a mfsroot image created using Adrian Chadd's > > >> freebsd-wifi-buiild and tftpbooted it. > > >> (I also had to do this: > > >> https://github.com/freebsd/freebsd-wifi-build/issues/9) > > >> > > >> The md0.ulzma image gets mounted, however the prompt ends here: > > >> > > >> ..... > > >> ifconfig: interface bridge0 does not exist > > >> bridge0: done > > >> *** inetd > > >> *** Done! > > >> > > >> Output on the terminal freezes here. > > >> (Full boot message here : http://pastebin.com/gkkBsJDn) > > >> > > >> Is the init complete at this point? I'm not getting any login prompt > after > > >> this. > > >> How does one access the console from here (over serial)? > > >> > > >> Also, I understand that this rt5350 support is work-in-progress, and > would > > >> love to help with the effort. > > >> > > >> Regards, > > >> Anant Kamath > > >> > > > _______________________________________________ > > > freebsd-mips@freebsd.org mailing list > > > https://lists.freebsd.org/mailman/listinfo/freebsd-mips > > > To unsubscribe, send any mail to "freebsd-mips-unsubscribe@freebsd.org > " > > _______________________________________________ > > freebsd-mips@freebsd.org mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-mips > > To unsubscribe, send any mail to "freebsd-mips-unsubscribe@freebsd.org" > > > -- > Aleksandr Rybalko <ray@ddteam.net> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAH0miJAS3nfdVz-D0RyZ8oE7dbfJbhQWVxhvpfKi4JHK92q%2B0w>