From owner-freebsd-questions Wed Feb 22 19:40:39 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.9/8.6.6) id TAA16762 for questions-outgoing; Wed, 22 Feb 1995 19:40:39 -0800 Received: from acatst01 (cos.titan.com [198.232.129.1]) by freefall.cdrom.com (8.6.9/8.6.6) with SMTP id TAA16755 for ; Wed, 22 Feb 1995 19:40:36 -0800 Received: from cartis01.cos.titan.com by acatst01 with SMTP (1.38.193.4/16.2) id AA19366; Wed, 22 Feb 1995 20:40:03 -0700 Received: from carti004 by cartis01.cos.titan.com with SMTP (1.37.109.8/gateway-v7.cos.titan.com) id AA01122; Wed, 22 Feb 1995 21:38:04 -0600 Received: by carti004.cos.titan.com (1.37.109.8/client-v7.cos.titan.com) id AA00948; Wed, 22 Feb 1995 21:40:22 -0600 Date: Wed, 22 Feb 1995 21:40:22 -0600 From: Wen-Jer Chang Message-Id: <9502230340.AA00948@carti004.cos.titan.com> To: questions@FreeBSD.org Subject: Adaptec 2940 install problem Sender: questions-owner@FreeBSD.org Precedence: bulk Hi Guys, I got the FreeBSD 2.0-95-0210-SNAP kernel programs from ftp.cdrom.com. But I still have some problem to install. The following are the messages during the installation: vga on pci0:13 ahc0 int a irq 10 on PCI0:15 ahc0: reading board settings acho: 294x single channel, SCSI Id=7, 16 SCBs ahc0: Downloading Sequencer Program...Done ahc0: Probing channel A ahc0 waiting for SCSI devices to settle ahc0: target 1 synchronous at 10.0 MB/s, offset=0xf ahc0 targ 1 lun 0: type 0(direct) fixed SCSI2 ahc0 targ 1 lun 0: And the computer stops here forever. I tried to disable cache memory (external & internal) but no use. My Hard drive is SCSI #1 and CD-ROM is #5. My Adaptec card is #7. Please take a look at this. Regards, Wen e-mail: wen@cos.titan.com