Date: Thu, 04 Apr 2002 19:51:39 +0200 From: joerg.maier@rz.uni-mannheim.de To: "freebsd-questions@FreeBSD.ORG" <freebsd-questions@FreeBSD.ORG> Subject: Re: some problem with mount_cd9660 Message-ID: <3CAC92AB.BBE472EA@rz.uni-mannheim.de> References: <3CAC4BD2.6613E914@rz.uni-mannheim.de> <E16t6ly-000CXb-00@pooh.noc.u-net.net> <3CAC5E10.64C287D7@rz.uni-mannheim.de> <E16t82l-000Ckm-00@pooh.noc.u-net.net>
next in thread | previous in thread | raw e-mail | index | archive | help
hi a kldstat gave me just the kernel and linux.ko, which obviosly means linux compatibility. trying kldload cd9660 sayd: kldload: can't load cd9660: file exists and then came some kernel messages like /kernel : module_register: module cd9660 exists /kernel: linker_file_sysinit "cd9660.ko" failed to register!17 after that, kldstat showed cd9660.ko, but mount /cdrom dindnt work with the same error message: /dev/acd0: device not configured. thanx joerg Peter McGarvey schrieb: > > If you haven't got any dev entries for acd do this (as root): > > cd /dev > ./MAKEDEV acd0 > > Actually after a makeworld it's always a good idea to do a `MAKEDEV all`. > > You didn't mention running mergemaster so for future referance here is the > way you should be upgrading your system: > > cd /usr/src > make buildworld > make buildkernel KERNCONF=XXX > make installkernel KERNCONF=XXX > <<reboot to single user - but only if you are paranoid>> > make installworld > mergemaster > reboot > > Mergemaster is a funky thing, it merges the updated config files with your > current config. It can be a bit hairy - you can sometimes overwrite > things that you really didn't want to overwrte, so a backup of /etc/ > before you run it is stronglt recommended. > > As for discovering which kernel modules you have loaded use kldstat. > Running verbose (kldstat -v) will allow you to see what modules are inside > the kernel. For a CD cd9660 is required. I'm not sure if mount will load > this automatically if it finds it's not there, but you can do it manually > with `kldload cd9660`. > > Hope you find some of this at least partially useful. > > On Thursday 04 April 2002 15:07 pm, joerg.maier@rz.uni-mannheim.de wrote: > > Peter McGarvey schrieb: > > > On Thursday 04 April 2002 13:49 pm, joerg.maier@rz.uni-mannheim.de > wrote: > > > > Hi, > > > > when trying to mount an iso 9660 cd i got some error message like: > > > > cd9660: /dev/acd0c: Device not configured > > > > > > > > But: there is a character device at /dev/acd0c > > > > dont know if the problem is maybe the kernel is not able to load the > > > > module even if there is /modules ??? > > > > > > > > thanks a lot, joerg > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > Have you actually got a CD drive that corresponds to /dev/acd0c? I'm > > > always forgetting which machines have ATAPI CD-ROMs and which have > > > SCSI CD-ROMS's. Check /var/run/dmesg.boot. > > > > > > Also, do you have a disk in the drive? Yes, I know this is obvious, > > > but I've done this many time myself. > > > > > > -- > > > TTFN, FNORD > > > > > > Peter McGarvey > > > System Administrator > > > Network Operations, VIA Networks UK > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > Yes i got a atapi cdrom drive and i installed 4.5 release by it. the > > line in /etc/fstab about /dev/acd0c that could be mounted on /cdrom was > > made by system install, not by me. > > actually, /var/run/dmesg.boot says: > > acd0: CDROM <FX810T> at ata0-master PIO3 > > > > there is no entry in /dev like acd0 so what to do? > > i got 4.5 release and upgraded with cvsup stable-supfile from the > > freebsd server. the buildkernel && installkernel, buildworld > > &&installworld. > > > > thanks, joerg > > -- > TTFN, FNORD > > Peter McGarvey > System Administrator > Network Operations, VIA Networks UK To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CAC92AB.BBE472EA>