Date: Tue, 31 Oct 2006 18:16:16 -0500 From: Nicolas Blais <nb_root@videotron.ca> To: freebsd-usb@freebsd.org Subject: Can't use JMTek usbdrive Message-ID: <200610311816.22435.nb_root@videotron.ca>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] When I plug my JMTek 1GB usb drive (http://www.jmtek.com/products/usbdrivesm.html) I get the following messages on my console: umass0: <JMTek USBDrive2.0, class 0/0, rev 2.00/2.00, addr 2> on uhub4 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:7:0:-1: Attached to scbus7 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <JMTek USBDrive2.0 2.00> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready change, (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retries Exhausted <SNIP X3> and usbdevs -v: Controller /dev/usb4: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), VIA(0x0000), rev 1.00 <snip> port 6 addr 2: high speed, power 200 mA, config 1, USBDrive2.0(0x2168), JMTek(0x3606), rev 2.00 With that, there are no slices to mount. My other usb drives work fine in FreeBSD, only this one isn't working. Any suggestions? Nicolas. -- FreeBSD 7.0-CURRENT #9: Tue Oct 31 15:44:23 EST 2006 nicblais@clk01a:/usr/obj/usr/src/sys/CLK01A PGP? : http://www.clkroot.net/security/nb_root.asc [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (FreeBSD) iD8DBQBFR9lG4wTBlvcsbJURAg7QAJ9u8TnHsyDjBvMqj/WTLoaN7wd4pACfQutx PnArsIPy3u1nxGcjSeao040= =j+Rh -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200610311816.22435.nb_root>