Date: Mon, 2 Jul 2001 15:45:06 -0600 From: "John R. Shannon" <john@johnrshannon.com> To: stable@FreeBSD.ORG Subject: Hard lockup Message-ID: <01070215450600.00581@pablo.johnrshannon.com>
next in thread | raw e-mail | index | archive | help
I'm also experiencing the lockups; 4 today since CVSUPing stable this AM.
/var/run/dmesg.boot:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #25: Mon Jul 2 08:23:43 MDT 2001
root@pablo.johnrshannon.com:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073676288 (1048512K bytes)
avail memory = 1041965056 (1017544K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc03ae000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 2 -> irq 2
IOAPIC #1 intpin 12 -> irq 9
IOAPIC #1 intpin 10 -> irq 10
IOAPIC #1 intpin 11 -> irq 11
IOAPIC #1 intpin 15 -> irq 16
IOAPIC #0 intpin 10 -> irq 17
pci0: <PCI bus> on pcib0
pcib4: <PCI to PCI bridge (vendor=1166 device=0009)> at device 0.1 on pci0
IOAPIC #1 intpin 14 -> irq 18
pci1: <PCI bus> on pcib4
pci1: <ATI Rage128-RF graphics accelerator> at 0.0 irq 18
pcm0: <Creative CT5880-C> port 0xdf00-0xdf3f irq 2 at device 2.0 on pci0
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xde00-0xdeff mem
0xfeaff000-0xfeafffff irq 9 at device 4.0 on pci0
aic7860: Single Channel A, SCSI Id=7, 3/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem
0xfeadc000-0xfeadcfff irq 10 at device 5.0 on pci0
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc2: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem
0xfeadf000-0xfeadffff irq 11 at device 5.1 on pci0
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem
0xfe900000-0xfe9fffff,0xfeadd000-0xfeaddfff irq 16 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:10:79:16
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfeade000-0xfeadefff irq 17 at
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem
0xc0000-0xcafff,0xcc000-0xccfff,0xcd000-0xd2fff,0xd3000-0xd37ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
(ahc2:A:5:0): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:1): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:2): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:3): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:4): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:5): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:6): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:7): refuses WIDE negotiation. Using 8bit transfers
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <Quantum DLT4000 D991> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
da0 at ahc1 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0006> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
cd0 at ahc2 bus 0 target 5 lun 0
cd0: <YAMAHA CRW2100S 1.0H> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 7)
cd0: cd present [17516 x 2048 byte records]
Mounting root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: R/W mount of /tmp denied. Filesystem is not clean - run fsck
boot() called on cpu#1
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks...
done
Restarting BSP
cpu_reset_proxy: Grabbed mp lock for BSP
cpu_reset_proxy: Stopped CPU 1
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #25: Mon Jul 2 08:23:43 MDT 2001
root@pablo.johnrshannon.com:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073676288 (1048512K bytes)
avail memory = 1041965056 (1017544K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc03ae000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 2 -> irq 2
IOAPIC #1 intpin 12 -> irq 9
IOAPIC #1 intpin 10 -> irq 10
IOAPIC #1 intpin 11 -> irq 11
IOAPIC #1 intpin 15 -> irq 16
IOAPIC #0 intpin 10 -> irq 17
pci0: <PCI bus> on pcib0
pcib4: <PCI to PCI bridge (vendor=1166 device=0009)> at device 0.1 on pci0
IOAPIC #1 intpin 14 -> irq 18
pci1: <PCI bus> on pcib4
pci1: <ATI Rage128-RF graphics accelerator> at 0.0 irq 18
pcm0: <Creative CT5880-C> port 0xdf00-0xdf3f irq 2 at device 2.0 on pci0
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xde00-0xdeff mem
0xfeaff000-0xfeafffff irq 9 at device 4.0 on pci0
aic7860: Single Channel A, SCSI Id=7, 3/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem
0xfeadc000-0xfeadcfff irq 10 at device 5.0 on pci0
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc2: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem
0xfeadf000-0xfeadffff irq 11 at device 5.1 on pci0
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem
0xfe900000-0xfe9fffff,0xfeadd000-0xfeaddfff irq 16 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:10:79:16
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfeade000-0xfeadefff irq 17 at
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem
0xc0000-0xcafff,0xcc000-0xccfff,0xcd000-0xd2fff,0xd3000-0xd37ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
(ahc2:A:5:0): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:1): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:2): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:3): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:4): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:5): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:6): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:7): refuses WIDE negotiation. Using 8bit transfers
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <Quantum DLT4000 D991> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
da0 at ahc1 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0006> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
cd0 at ahc2 bus 0 target 5 lun 0
cd0: <YAMAHA CRW2100S 1.0H> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 7)
cd0: cd present [17516 x 2048 byte records]
Mounting root from ufs:/dev/da0s1a
pid 281 (Xaccel): trap 12 with interrupts disabled
boot() called on cpu#0
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 8
done
Uptime: 17m59s
Rebooting...
cpu_reset called on cpu#0
cpu_reset: Stopping other CPUs
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #25: Mon Jul 2 08:23:43 MDT 2001
root@pablo.johnrshannon.com:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073676288 (1048512K bytes)
avail memory = 1041965056 (1017544K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc03ae000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 2 -> irq 2
IOAPIC #1 intpin 12 -> irq 9
IOAPIC #1 intpin 10 -> irq 10
IOAPIC #1 intpin 11 -> irq 11
IOAPIC #1 intpin 15 -> irq 16
IOAPIC #0 intpin 10 -> irq 17
pci0: <PCI bus> on pcib0
pcib4: <PCI to PCI bridge (vendor=1166 device=0009)> at device 0.1 on pci0
IOAPIC #1 intpin 14 -> irq 18
pci1: <PCI bus> on pcib4
pci1: <ATI Rage128-RF graphics accelerator> at 0.0 irq 18
pcm0: <Creative CT5880-C> port 0xdf00-0xdf3f irq 2 at device 2.0 on pci0
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xde00-0xdeff mem
0xfeaff000-0xfeafffff irq 9 at device 4.0 on pci0
aic7860: Single Channel A, SCSI Id=7, 3/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem
0xfeadc000-0xfeadcfff irq 10 at device 5.0 on pci0
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc2: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem
0xfeadf000-0xfeadffff irq 11 at device 5.1 on pci0
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem
0xfe900000-0xfe9fffff,0xfeadd000-0xfeaddfff irq 16 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:10:79:16
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfeade000-0xfeadefff irq 17 at
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem
0xc0000-0xcafff,0xcc000-0xccfff,0xcd000-0xd2fff,0xd3000-0xd37ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
(ahc2:A:5:0): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:1): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:2): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:3): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:4): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:5): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:6): refuses WIDE negotiation. Using 8bit transfers
(ahc2:A:5:7): refuses WIDE negotiation. Using 8bit transfers
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <Quantum DLT4000 D991> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
da0 at ahc1 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0006> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
cd0 at ahc2 bus 0 target 5 lun 0
cd0: <YAMAHA CRW2100S 1.0H> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 7)
cd0: cd present [17516 x 2048 byte records]
Mounting root from ufs:/dev/da0s1a
@%9`%9
--
John R. Shannon
john@johnrshannon.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01070215450600.00581>