Date: Sat, 31 Mar 2007 22:04:46 +0200 From: Lars Engels <lars.engels@0x20.net> To: "M. Warner Losh" <imp@bsdimp.com> Cc: freebsd-mobile@freebsd.org, cstjean@cs.kent.edu Subject: Re: Toshiba Cardbus Message-ID: <20070331200445.GG54027@e.0x20.net> In-Reply-To: <20070331.132550.228971957.imp@bsdimp.com> References: <20070325064132.GA6682@neptune.cs.kent.edu> <4609A300.8070004@cs.kent.edu> <20070331181509.GF54027@e.0x20.net> <20070331.132550.228971957.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Qz2CZ664xQdCRdPu
Content-Type: multipart/mixed; boundary="BI5RvnYi6R4T2M87"
Content-Disposition: inline
--BI5RvnYi6R4T2M87
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
On Sat, Mar 31, 2007 at 01:25:50PM -0600, M. Warner Losh wrote:
> In message: <20070331181509.GF54027@e.0x20.net>
> Lars Engels <lars.engels@0x20.net> writes:
> : But I have one issue: This all only works with a 7-current kernel from
> : January. I also have a recent current GENERIC kernel which doesn't seem
> : to support the cardbus _and_ pccard bus at all. An old 16-bit wi(4) card
> : was always recognized but with that new kernel even with that card
> : nothing happens when I insert it. dmesg doesn't show anything.
> :=20
> : Can someone second this?
>=20
> I've not seen this, so there's something different between my setup
> and yours. We should try to find out what it is.
>=20
Thank you for your offer!
Attached you find the output from sysctl and the dmesg of both kernels.
The command for the working kernel is:
pciconf -wb pci0:30:0 0x1a 8
Which additional information do you need?
Lars
--BI5RvnYi6R4T2M87
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: attachment; filename=cardbus_debug
Content-Transfer-Encoding: quoted-printable
=3D=3D=3D sysctl =3D=3D=3D
hw.cbb.start_memory: 2281701376
hw.cbb.start_16_io: 256
hw.cbb.start_32_io: 4096
hw.cbb.debug: 1
dev.cbb.0.%desc: RF5C476 PCI-CardBus Bridge
dev.cbb.0.%driver: cbb
dev.cbb.0.%location: slot=3D9 function=3D0 handle=3D\_SB_.PCI0.PCIB.CDB0
dev.cbb.0.%pnpinfo: vendor=3D0x1180 device=3D0x0476 subvendor=3D0x144d subd=
evice=3D0xc504 class=3D0x060700
dev.cbb.0.%parent: pci5
dev.cbb.0.pribus: 5
dev.cbb.0.secbus: 6
dev.cbb.0.subbus: 7
dev.cardbus.0.%parent: cbb0
dev.pccard.0.%parent: cbb0
=3D=3D=3D dmesg of _not_ working kernel=3D=3D=3D
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #1: Sat Mar 31 18:27:38 CEST 2007
lars@maggie.bsd-geek.de:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU T2300 @ 1.66GHz (1662.51-MHz 686-class=
CPU)
Origin =3D "GenuineIntel" Id =3D 0x6e8 Stepping =3D 8
Features=3D0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0xc189<SSE3,MON,EST,TM2,xTPR,<b15>>
Cores per package: 2
real memory =3D 1063845888 (1014 MB)
avail memory =3D 1027465216 (979 MB)
ACPI APIC Table: <INTEL CALISTGA>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI: RSDP @ 0x0xf7660/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x3f696086/0x0040 (v 1 PTLTD Capell00 0x06040000 LTP 0x00=
000000)
ACPI: FACP @ 0x0x3f69ae20/0x0074 (v 1 INTEL CALISTGA 0x06040000 LOHR 0x00=
00005A)
ACPI: DSDT @ 0x0x3f696c94/0x418C (v 1 INTEL CALISTGA 0x06040000 INTL 0x20=
050624)
ACPI: FACS @ 0x0x3f69bfc0/0x0040
ACPI: APIC @ 0x0x3f69ae94/0x0068 (v 1 INTEL CALISTGA 0x06040000 LOHR 0x00=
00005A)
ACPI: HPET @ 0x0x3f69aefc/0x0038 (v 1 INTEL CALISTGA 0x06040000 LOHR 0x00=
00005A)
ACPI: MCFG @ 0x0x3f69af34/0x003C (v 1 INTEL CALISTGA 0x06040000 LOHR 0x00=
00005A)
ACPI: APIC @ 0x0x3f69af70/0x0068 (v 1 PTLTD APIC 0x06040000 LTP 0x00=
000000)
ACPI: BOOT @ 0x0x3f69afd8/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP 0x00=
000001)
ACPI: SSDT @ 0x0x3f6960c6/0x04F6 (v 1 PmRef CpuPm 0x00003000 INTL 0x20=
050624)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
kqemu version 0x00010300
kqemu: KQEMU installed, max_locked_mem=3D513036kB.
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD Capell00> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x3f6969ba/0x0251 (v 1 PmRef Cpu0Ist 0x00003000 INTL 0x20=
050624)
ACPI: SSDT @ 0x0x3f6965bc/0x0379 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20=
050624)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x3f696c0b/0x0089 (v 1 PmRef Cpu1Ist 0x00003000 INTL 0x20=
050624)
ACPI: SSDT @ 0x0x3f696935/0x0085 (v 1 PmRef Cpu1Cst 0x00003000 INTL 0x20=
050624)
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xd8100000-0xd817f=
fff,0xc0000000-0xcfffffff,0xd8200000-0xd823ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xd8180000-0xd81fffff at device 2.1 o=
n pci0
pcm0: <Intel 82801G High Definition Audio Controller> mem 0xd8240000-0xd824=
3fff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pci2: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device =
29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device =
29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device =
29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device =
29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd8444000-0xd84443f=
f irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
rum0: <Ralink 802.11 bg WLAN, class 0/0, rev 2.00/0.01, addr 2> on uhub4
rum0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:19:5b:6d:a4:da
rum0: firmware loaded: name: rt2573, size:2048
rum0: using obsoleted if_watchdog interface
rum0: Ethernet address: 00:19:5b:6d:a4:da
rum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
rum0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbp=
s 36Mbps 48Mbps 54Mbps
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib3
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xd8000000-0xd8001fff irq 22 =
at device 5.0 on pci5
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: using obsoleted if_watchdog interface
bfe0: Ethernet address: 00:00:f0:7f:da:00
bfe0: [GIANT-LOCKED]
bfe0: [ITHREAD]
cbb0: <RF5C476 PCI-CardBus Bridge> at device 9.0 on pci5
cbb0: Found memory at e0000000
cbb0: Secondary bus is 0
cbb0: Setting primary bus to 5
cbb0: Secondary bus set to 6 subbus 7
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
fwohci0: <Ricoh R5C552> mem 0xd8002000-0xd80027ff at device 9.1 on pci5
fwohci0: [GIANT-LOCKED]
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.0 (ROM=3D1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:f0:41:20:0f:ab:79
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:f0:0f:ab:79
fwe0: Ethernet address: 02:00:f0:0f:ab:79
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
pci5: <base peripheral> at device 9.2 (no driver attached)
pci5: <base peripheral> at device 9.3 (no driver attached)
pci5: <base peripheral> at device 9.4 (no driver attached)
pci5: <base peripheral> at device 9.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177=
,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp=
i0
Timecounter "HPET" frequency 14318180 Hz quality 2000
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: <Broadcom Corp Foxconn Bluetooth 2.0 plus EDR, class 224/1, rev 2.00=
/1.00, addr 2> on uhub2
Timecounters tick every 1.000 msec
Status is 0x6000003
ad0: 69042MB <HTS541080G9AT00 MB4OA60A> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/SC01> at ata0-slave UDMA33
pcm0: <HDA Codec: Analog Device AD1986A>
pcm0: <HDA Driver Revision: 20070320_0043>
GEOM_LABEL: Label for provider ad0s2 is ntfs/Windows.
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s3a
=3D=3D=3D dmesg of working kernel =3D=3D=3D
FreeBSD maggie.bsd-geek.de 7.0-CURRENT FreeBSD 7.0-CURRENT #1: Sun Jan 14 0=
0:10:36 CET 2007 lars@maggie.bsd-geek.de:/usr/obj/usr/src/sys/MAGGIE i=
386
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #1: Sun Jan 14 00:10:36 CET 2007
lars@maggie.bsd-geek.de:/usr/obj/usr/src/sys/MAGGIE
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
WARNING: MPSAFE network stack disabled, expect reduced performance.
link_elf: symbol _sleep undefined
KLD file pwc.ko - could not finalize loading
ACPI APIC Table: <INTEL CALISTGA>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU T2300 @ 1.66GHz (1662.52-MHz 686-class=
CPU)
Origin =3D "GenuineIntel" Id =3D 0x6e8 Stepping =3D 8
Features=3D0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0xc189<SSE3,MON,EST,TM2,XTPR,<b15>>
Cores per package: 2
real memory =3D 1063845888 (1014 MB)
avail memory =3D 1031655424 (983 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
kqemu version 0x00010300
kqemu: KQEMU installed, max_locked_mem=3D515084kB.
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD Capell00> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xd8100000-0xd817f=
fff,0xc0000000-0xcfffffff,0xd8200000-0xd823ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drm0: <Intel i945GM> on vgapci0
info: [drm] AGP at 0xd8100000 0MB
info: [drm] Initialized i915 1.5.0 20060119
vgapci1: <VGA-compatible display> mem 0xd8180000-0xd81fffff at device 2.1 o=
n pci0
pcm0: <Intel 82801G High Definition Audio Controller> mem 0xd8240000-0xd824=
3fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pci2: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device =
29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device =
29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device =
29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device =
29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd8444000-0xd84443f=
f irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
usb4: handing over full speed device on port 5 to usb2
uhub4: port 5, device disappeared after reset
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib3
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xd8000000-0xd8001fff irq 22 =
at device 5.0 on pci5
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: using obsoleted if_watchdog interface
bfe0: Ethernet address: 00:00:f0:7f:da:00
bfe0: [GIANT-LOCKED]
cbb0: <RF5C476 PCI-CardBus Bridge> at device 9.0 on pci5
cbb0: Found memory at 80000000
cbb0: Secondary bus is 0
cbb0: Setting primary bus to 5
cbb0: Secondary bus set to 6 subbus 7
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <Ricoh R5C552> mem 0xd8002000-0xd80027ff at device 9.1 on pci5
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=3D1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:f0:41:20:0f:ab:79
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:f0:0f:ab:79
fwe0: Ethernet address: 02:00:f0:0f:ab:79
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
pci5: <base peripheral> at device 9.2 (no driver attached)
pci5: <base peripheral> at device 9.3 (no driver attached)
pci5: <base peripheral> at device 9.4 (no driver attached)
pci5: <base peripheral> at device 9.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177=
,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp=
i0
Timecounter "HPET" frequency 14318180 Hz quality 2000
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FAST]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: <Broadcom Corp Foxconn Bluetooth 2.0 plus EDR, class 224/1, rev 2.00=
/1.00, addr 2> on uhub2
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, =
default to accept, logging disabled
Status is 0x30000006
ad0: 69042MB <HTS541080G9AT00 MB4OA60A> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/SC01> at ata0-slave UDMA33
pcm0: <HDA Codec: Analog Device AD1986A>
pcm0: <HDA Driver Revision: 20070105_0038>
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 1 lun 0
cd0: <TSSTcorp CD/DVDW TS-L632D SC01> Removable CD-ROM SCSI-0 device=20
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - t=
ray closed
Trying to mount root from ufs:/dev/ad0s3a
--BI5RvnYi6R4T2M87--
--Qz2CZ664xQdCRdPu
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (FreeBSD)
iD8DBQFGDr7dKc512sD3afgRAqD1AJ99aiLtsRhSsNVlo1ere0q9GWke9wCggtwA
jOSOekerkASAIynFcXqZ0DM=
=5xoc
-----END PGP SIGNATURE-----
--Qz2CZ664xQdCRdPu--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070331200445.GG54027>