From owner-freebsd-hardware  Mon Jul 12  2:51:49 1999
Delivered-To: freebsd-hardware@freebsd.org
Received: from mauibuilt.com (mauibuilt.com [205.166.249.50])
	by hub.freebsd.org (Postfix) with ESMTP
	id 47A7814C98; Mon, 12 Jul 1999 02:51:44 -0700 (PDT)
	(envelope-from puga@mauibuilt.com)
Received: from mauibuilt.com (puga.mauibuilt.com [205.166.10.2])
	by mauibuilt.com (8.8.8/8.8.7) with ESMTP id XAA06391;
	Sun, 11 Jul 1999 23:54:42 -1000 (HST)
	(envelope-from puga@mauibuilt.com)
Message-ID: <378981EA.5CC31B1C@mauibuilt.com>
Date: Sun, 11 Jul 1999 19:49:30 -1000
From: Richard Puga <puga@mauibuilt.com>
X-Mailer: Mozilla 4.6 [en] (X11; I; FreeBSD 3.1-RELEASE i386)
X-Accept-Language: en
MIME-Version: 1.0
To: freebsd-hackers@freebsd.org, freebsd-hardware@freebsd.org
Subject: WaveLAN problem
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-hardware@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

I have a WaveLAN ISA adaptor.

I am trying to run it in a machine equiped with an AMD K6-2 350
processor running at 66mhz bus speed.
I am getting the following error while ifconfiging the card.

ifconfig wl0 192.168.10.1
ifconfig: ioctl (SIOCAIFADDR): File exists
cray100 /root 2% Jul 12 03:43:23 cray100 /kernel: wl0: diag() failed;
status = 0, inw = 0, outw = e0a0
Jul 12 03:43:23 cray100 /kernel: wl0: diag() failed; status = 0, inw =
0, outw = e0a0
Jul 12 03:43:23 cray100 /kernel: scb_status a000
Jul 12 03:43:23 cray100 /kernel: scb_status a000
Jul 12 03:43:23 cray100 /kernel: scb_command 0
Jul 12 03:43:23 cray100 /kernel: scb_command 0
Jul 12 03:43:23 cray100 /kernel: scb_cbl ffc0
Jul 12 03:43:23 cray100 /kernel: scb_cbl ffc0
Jul 12 03:43:23 cray100 /kernel: cu_cmd 8007
Jul 12 03:43:23 cray100 /kernel: cu_cmd 8007
Jul 12 03:43:23 cray100 /kernel: wl0 init(): trouble resetting board.
Jul 12 03:43:23 cray100 /kernel: wl0 init(): trouble resetting board.


I belive the issure is some kind of timeing problem because the dos
drivers and ptpdiag work and the card works with freebsd in other
machines.

I have tried about everything I can think of I have set
machdep.wl_xmit_delay:   up and down
as well as played with clock speeds of the CPU and motherboard as well
as bios wait states, pnp settings ect. and differant wavelan cards.

I even reset the factory setting off 0x300 irq 10 to other ones just  to

be sure.. I have tried the
drivers in 3.0 3.1 and 4.0 current they all do the same thing..

thease are the current dmesg settings

wl0 at 0x390-0x39f irq 5 on isa
wl0: address 08:00:6a:2b:e3:30, NWID 0x5262, Freq 2422 MHz

and the wlconfig info...
cray100 /root 6% wlconfig wl0
Board type            : ISA
Base address options  : 0x300, 0x390, 0x3c0, 0x3e0
Waitstates            : 0
Bus mode              : ISA
IRQ                   : 5
Default MAC address   : 08:00:6a:2b:e3:30
Soft MAC address      : 00:00:00:00:00:00
Current MAC address   : Default
Adapter compatability : PCCARD or 1/2 size AT, 915MHz or 2.4GHz
Threshold preset      : 1
Call code required    : NO
Subband               : 915MHz/see WaveModem
Quality threshold     : 3
Hardware version      : 1 (Rel3)
Network ID enable     : YES
NWID                  : 0x5262
Datalink security     : NO
Databus width         : 16 (variable)
Configuration state   : unconfigured
CRC-16                : 0xaba1
CRC status            : OK

If anyone can help in any way or point me to someone who might
I would greatly apreciate it.

Thanks in advance

Richard Puga
puga@mauibuilt.com



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message