From owner-freebsd-questions Wed Feb 22 20:06:39 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.9/8.6.6) id UAA18276 for questions-outgoing; Wed, 22 Feb 1995 20:06:39 -0800 Received: from mail3.netcom.com (root@mail3.netcom.com [192.100.81.127]) by freefall.cdrom.com (8.6.9/8.6.6) with ESMTP id UAA18266 for ; Wed, 22 Feb 1995 20:06:34 -0800 From: patl@asimov.lashley.slip.netcom.com Received: from lashley.slip.netcom.com by mail3.netcom.com (8.6.9/Netcom) id UAA28358; Wed, 22 Feb 1995 20:05:50 -0800 Received: by lashley.slip.netcom.com (5.x/SMI-SVR4) id AA03764; Wed, 22 Feb 1995 20:09:04 -0800 Date: Wed, 22 Feb 1995 20:09:04 -0800 Message-Id: <9502230409.AA03764@lashley.slip.netcom.com> To: questions@FreeBSD.org Subject: RESOLVED: FreeBSD 2.0 -vs- EtherPower Reply-To: lashley@netcom.com X-Sun-Charset: US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk I just suffered a rush of oxygen to the brain - the problem appears to have been caused by stone ignorance. (I -knew- it would be something simple...) When I put the system together, I plugged the EtherPower board into PCI slot three to leave the maximum room for the serial cables, etc. But by default slot three doesn't have an interrupt assigned to INTA. And neither the ASUS doc nor the EtherPower doc made it sufficiently clear to me just how the PCI interrupts work... Moving the board to slot one fixed it. Thanks to all who responded. (Several of whom reminded me of some network diagnostic tools that I had forgotten about. Thanks also to whoever decided that they should be a standard part of the release.) -Pat My opinions are my own. For a small royalty, they can be yours as well... Pat Lashley, Senior Software Engineer, Henry Davis Consulting 1098 Lynn, Sunnyvale, CA 94087 || 408/720-9039 || lashley@netcom.com