Date: Thu, 15 Nov 2001 10:25:34 +0100 From: "Sven Huster" <sven.huster@mailsurf.com> To: <freebsd-questions@freebsd.org>, <jacks@sage-american.com> Subject: Re: DSL PPPoE with 2 NICs Message-ID: <056501c16db7$7af0aac0$fe00fa0a@venus> References: <3.0.5.32.20011114192000.00fbf8a8@mail.sage-american.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I have done it some time ago, so cant remember exactly but for me it worked out of the box, I think. [ppp.conf] default: set server +3000 <you don't want to know this> t-online_dsl: set device PPPoE:<your ethernet interface> set MTU 1492 set MRU 1492 set dial set crtscts off set speed sync accept lqr disable deflate disable pred1 disable vjcomp disable acfcomp disable protocomp # enable dns set log Phase Warning Error Alert # set log Phase LCP IPCP CCP Warning Error Alert set ifaddr 10.0.0.1/0 10.0.0.2/0 0.0.0.0 0.0.0.0 add default HISADDR set login set authname <you don't want to know this> set authkey <you don't want to know this> [/ppp.conf] [rc.conf] ppp_enable="YES" ppp_mode="ddial" ppp_nat="YES" ppp_profile="t-online_dsl" ppp_user="root" [/rc.conf] works for me in de regards Sven ----- Original Message ----- From: <jacks@sage-american.com> To: <freebsd-questions@freebsd.org> Sent: 15 November, 2001 02:20 Subject: DSL PPPoE with 2 NICs > We have a small LAN about to be set up on a DSL connection which is > activated. The LAN is currently sharing an ISDN Internet connection (not > used for incoming remotes). The gateway machine (192.168.0.1) is running > Win2K. There are several Win2K stations on the LAN and a couple of FreeBSDs > running 4.4, on manually assigned. The DSL is an external modem via PPPoE. > The LAN is connected via Hub. Each box has a RealTek 8139 on device rl0. > > We want to install the DSL in one of the FreeBSD boxes (192.168.0.202) to > use with the > DSL (and change to the gateway in place of the Win2K). here's how the > ifconfig -a > looks now: > > ********************************************************************* > rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet6 fe80::240:33ff:fe57:92dd%rl0 prefixlen 64 scopeid 0x1 > inet 192.168.0.202 netmask 0xffffff00 broadcast 192.168.0.255 > ether 00:40:33:57:92:dd > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 > ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > faith0: flags=8000<MULTICAST> mtu 1500 > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > inet 127.0.0.1 netmask 0xff000000 > ********************************************************************* > > A second NIC card (D-Link DFE-530TX+) will be added for the DSL modem and > it loads as > device r11 (without modem connected yet). > > The "tun" devices are made and ready.... and 4.4 loads netgraph support I > believe without need to build into the kernel. > > QUESTION: > Does anyone listening have a similar setup as planned above...DSL PPP over > PPPoE with two NICs (1 for the modem and 1 for the LAN) and if so, may I > see your ppp.conf file... and what else should I worry about? > > I have read all of the many papers/guides (including Renaud Waldura's > paper). Any added tips would be VERY welcome as I really want to use BSD > rather than Win2K..... many t > > Best regards, > Jack L. Stone, > Server Admin > > Sage-American > http://www.sage-american.com > jacks@sage-american.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?056501c16db7$7af0aac0$fe00fa0a>