Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 15 Nov 2002 11:08:38 -0600
From:      mark.b@chillicothehospital.org
To:        freebsd-questions@freebsd.org
Subject:   Re: burncd on 4.7 + YAMAHA CRW2200E (again)
Message-ID:  <3DD4D5B6.4849.B54F4B@localhost>
In-Reply-To: <20021115164930.GA3526@trefle.ens.fr>

next in thread | previous in thread | raw e-mail | index | archive | help
Just a stab in the dark, When I got my first cd burner, it would not burn =
but would read cd's 
fine, the problem was the burner had to use the "master plug" on the IDE c=
able.


On 15 Nov 2002 at 17:49, Jacques Beigbeder wrote:

Date sent:      	Fri, 15 Nov 2002 17:49:30 +0100
From:           	Jacques Beigbeder <Jacques.Beigbeder@ens.fr>
To:             	freebsd-questions@freebsd.org
Subject:        	burncd on 4.7 + YAMAHA CRW2200E (again)

> Hardware: PC Asus / Athlon processor
> OS : FreeBSD 4.7, GENERIC kernel
> 
> During the boot, I read in syslog messages:
>  ata1-slave: ATAPI identify retries exceeded
>  ad0: 19546MB <FUJITSU MPG3204AH E> [39714/16/63] at ata0-master
>  UDMA100 acd0: CD-RW <YAMAHA CRW2200E> at ata1-master PIO4
> So the hard drive is primary master, the CD is secondary master.
> 
> The CD works since I can mount data CD. It works under Linux
> with cdrecord.
> 
> I can write CD-RW with:
>  burncd -f /dev/acd0c blank
>  burncd -f /dev/acd0c data MY_ISO_IMAGE fixate
> But with a CD-R the same (second) command fails and /var/log/messages
> says:
> 
> Nov 15 14:56:58 tempo2 /kernel: acd0: SEND_OPC_INFO command timeout -
> resetting Nov 15 14:56:58 tempo2 /kernel: ata1: resetting devices ..
> ata1-slave: ATAPI identify retries exceeded Nov 15 14:56:58 tempo2
> /kernel: done
> 
> Just once; what's about "ATAPI identify retries exceeded'? There's
> nothing slave! Than, with a loop:
> 
> Nov 15 14:57:56 tempo2 /kernel: acd0: SEND_OPC_INFO command timeout -
> resetting Nov 15 14:57:56 tempo2 /kernel: ata1: resetting devices ..
> done Nov 15 14:59:13 tempo2 /kernel: acd0: SEND_OPC_INFO command
> timeout - resetting Nov 15 14:59:13 tempo2 /kernel: ata1: resetting
> devices .. done
> 
> Any hint? Thanks in advance,
> 
> --
> Jacques Beigbeder                    |  Jacques.Beigbeder@ens.fr
> Service de Prestations Informatiques |     http://www.spi.ens.fr
> Ecole normale sup=E9rieure             |
> 45 rue d'Ulm                         |Tel : (+33 1)1 44 32 37 96
> F75230 Paris cedex 05                |Fax : (+33 1)1 44 32 20 75
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message


* *  *   *   *     *       * * *
*    * *   *   *   *   *       *
     *                   *

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3DD4D5B6.4849.B54F4B>