Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 28 Sep 1999 07:40:01 -0700 (PDT)
From:      Riccardo Torrini <riccardo@torrini.org>
To:        freebsd-bugs@FreeBSD.org
Subject:   Re: misc/13992: routed exit after some day of work with signal 6 (core  dump)
Message-ID:  <199909281440.HAA65371@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
The following reply was made to PR misc/13992; it has been noted by GNATS.

From: Riccardo Torrini <riccardo@torrini.org>
To: Ruslan Ermilov <ru@ucb.crimea.ua>
Cc:  
Subject: Re: misc/13992: routed exit after some day of work with signal 6 (core 
 dump)
Date: Tue, 28 Sep 1999 16:20:43 +0200

 This is a multi-part message in MIME format.
 --------------225CBA2E802707D70362173B
 Content-Type: text/plain; charset=us-ascii
 Content-Transfer-Encoding: 7bit
 
 Ruslan Ermilov wrote:
 
 > Let it run until it finishes.  If it finishes, it will print an
 > incorrect date returned by gettimeofday().
 
 After about 20minutes:
 gettimeofday_test: invalid time returned: 938527821:-695331771
 
 
 # sysctl kern.timecounter.method machdep.tsc_freq
 kern.timecounter.method: 0
 
 
 # sysctl -a | grep -i machdep
 machdep.consdev: { major = 0, minor = 0 }
 machdep.adjkerntz: -7200
 machdep.disable_rtc_set: 0
 machdep.wall_cmos_clock: 1
 machdep.do_dump: 1
 machdep.ispc98: 0
 machdep.msgbuf: 
 machdep.msgbuf_clear: 0
 machdep.i8254_freq: 1193182
 machdep.conspeed: 9600
 
 
 # sysctl -a | grep -i tsc
 
 
 # sysctl -a | grep -i freq
 kern.acct_chkfreq: 15
 machdep.i8254_freq: 1193182
 
 
 Sorry, no machdep.tsc_freq (but a sound-like machdep.i8254_freq)
 If you are sure of spelling I am missing something :-(
 
 
 Ciao++
 Vic.
 /------------------------+---------------------------------------\
 | Riccardo "VIC" Torrini | W.W.W.: www.torrini.org            // |
 |   Via Montebello, 64   | e-mail : riccardo@torrini.org     //  |
 |   50123 Firenze  (I)   +--------------------------------\\//---|
 | phone: +39-055-286.574 |        This space for rent :-)        |
 \------------------------+---------------------------------------/
 --------------225CBA2E802707D70362173B
 Content-Type: text/plain; charset=us-ascii;
  name="dmesg.boot"
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline;
  filename="dmesg.boot"
 
 Copyright (c) 1992-1999 FreeBSD Inc.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
 	The Regents of the University of California. All rights reserved.
 FreeBSD 3.3-STABLE #0: Wed Sep 22 08:57:26 CEST 1999
     root@snail.fi.esaote.it:/usr/src/sys/compile/OCTOPUSSY
 Timecounter "i8254"  frequency 1193182 Hz
 CPU: i486 DX2 (486-class CPU)
   Origin = "GenuineIntel"  Id = 0x435  Stepping = 5
   Features=0x3<FPU,VME>
 real memory  = 92274688 (90112K bytes)
 avail memory = 86380544 (84356K bytes)
 Preloaded elf kernel "kernel" at 0xc0318000.
 Preloaded splash_image_data "/boot/daemon.bmp" at 0xc031809c.
 Preloaded elf module "splash_bmp.ko" at 0xc03180ec.
 eisa0: <HWPc081 (System Board)>
 Probing for devices on the EISA bus
 ahc0: <Adaptec aic7770 SCSI host adapter> at 0xbc00-0xbcff irq 15
 ahc0: on eisa0 slot 11
 ahc0: aic7770 >= Rev E, Twin Channel, A SCSI Id=7, B SCSI Id=7, primary A, 4/255 SCBs
 Probing for devices on the ISA bus:
 sc0 on isa
 sc0: VGA color <16 virtual consoles, flags=0x0>
 atkbdc0 at 0x60-0x6f on motherboard
 atkbd0 irq 1 on isa
 psm0 not found
 sio2 at 0x3e8-0x3ef irq 4 on isa
 sio2: type 16550A
 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
 fdc0: FIFO enabled, 8 bytes threshold
 fd0: 1.44MB 3.5in
 wdc0 at 0x1f0-0x1f7 irq 14 on isa
 wdc0: unit 1 (atapi): <FX001DE/K01>, removable, intr, iordis
 acd0: drive speed 689KB/sec, 128KB cache
 acd0: supported read types:
 acd0: Audio: play, 255 volume levels
 acd0: Mechanism: ejectable tray
 acd0: Medium: no/blank disc inside, unlocked
 ppc0 at 0x378 irq 7 on isa
 ppc0: PC87332 chipset (NIBBLE-only) in COMPATIBLE mode
 ex0 at 0x2a0-0x2af irq 10 on isa
 ex0: Intel EtherExpress Pro/10, address 00:aa:00:ad:61:fd, connector TPE
 ex1 at 0x2b0-0x2bf irq 11 on isa
 ex1: Intel EtherExpress Pro/10, address 00:aa:00:ad:64:f0, connector TPE
 ex2 at 0x2c0-0x2cf irq 3 on isa
 ex2: Intel EtherExpress Pro/10, address 00:aa:00:ae:5c:e7, connector TPE
 ex3 at 0x2d0-0x2df irq 5 on isa
 ex3: Intel EtherExpress Pro/10, address 00:aa:00:ad:63:8e, connector TPE
 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
 npx0 on motherboard
 npx0: INT 16 interface
 ccd0-3: Concatenated disk drivers
 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, logging disabled
 DUMMYNET initialized (990504)
 IP Filter: initialized.  Default = pass all, Logging = enabled
 Waiting 15 seconds for SCSI devices to settle
 da0 at ahc0 bus 0 target 0 lun 0
 da0: <IBM OEM 0662S12 3 30> Fixed Direct Access SCSI-2 device 
 da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
 da0: 1003MB (2055035 512 byte sectors: 64H 32S/T 1003C)
 da1 at ahc0 bus 0 target 1 lun 0
 da1: <IBM OEM 0662S12 1011> Fixed Direct Access SCSI-2 device 
 da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
 da1: 1003MB (2055035 512 byte sectors: 64H 32S/T 1003C)
 da3 at ahc0 bus 0 target 3 lun 0
 da3: <SEAGATE ST31230N 0594> Fixed Direct Access SCSI-2 device 
 da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
 da3: 1010MB (2069860 512 byte sectors: 64H 32S/T 1010C)
 da2 at ahc0 bus 0 target 2 lun 0
 da2: <HP 1.050 GB #A2 0180> Fixed Direct Access SCSI-2 device 
 da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
 da2: 1001MB (2051460 512 byte sectors: 64H 32S/T 1001C)
 changing root device to da0s1a
 
 --------------225CBA2E802707D70362173B--
 
 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199909281440.HAA65371>