Date: Wed, 15 Apr 2009 20:49:44 -0700 From: vehemens <vehemens@verizon.net> To: freebsd-x11@freebsd.org Subject: Re: Further Xorg regressions Message-ID: <200904152049.44291.vehemens@verizon.net> In-Reply-To: <20090415090751.GD1390@server.vk2pj.dyndns.org> References: <20090415090751.GD1390@server.vk2pj.dyndns.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 15 April 2009 02:07:52 am Peter Jeremy wrote: > I have just finished upgrading my amd64 to a fairly recent -current > (from Sunday), together with a completely up-to-date ports tree and > X.org has now "improved" to the point where it doesn't work at all. > > The video card is a Radeon HD 2400 Pro (RV610). > > With the radeonhd driver, Xorg starts and just displays a totally blank > (though active) screen. I can switch to/from VTY screens without > problem and Ctrl-Alt-BS works properly (after enabling it). Output > from X is: > server# X -nolisten inet6 -config /etc/X11/xorg.conf.rhd > > X.Org X Server 1.6.0 > Release Date: 2009-2-25 > X Protocol Version 11, Revision 0 > Build Operating System: FreeBSD 8.0-CURRENT amd64 > Current Operating System: FreeBSD server.vk2pj.dyndns.org 8.0-CURRENT > FreeBSD 8.0-CURRENT #6: Sun Apr 12 22:57:30 EST 2009 > root@server.vk2pj.dyndns.org:/var/obj/usr/src/sys/server amd64 Build Date: > 15 April 2009 07:03:06AM > > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 18:55:03 2009 > (++) Using config file: "/etc/X11/xorg.conf.rhd" > None > server# > > With the radeon driver, it dies with an undefined symbol and destroys my > video output (no video so monitor shuts down): > server# X -nolisten inet6 -config /etc/X11/xorg.conf > > X.Org X Server 1.6.0 > Release Date: 2009-2-25 > X Protocol Version 11, Revision 0 > Build Operating System: FreeBSD 8.0-CURRENT amd64 > Current Operating System: FreeBSD server.vk2pj.dyndns.org 8.0-CURRENT > FreeBSD 8.0-CURRENT #6: Sun Apr 12 22:57:30 EST 2009 > root@server.vk2pj.dyndns.org:/var/obj/usr/src/sys/server amd64 Build Date: > 15 April 2009 07:03:06AM > > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 18:54:49 2009 > (++) Using config file: "/etc/X11/xorg.conf" > (EE) Failed to load module "xtrap" (module does not exist, 0) > Shared DDC line: 2 3 > Shared DDC line: 2 4 > Shared DDC line: 3 2 > XRANDR name: VGA-0 > Connector: VGA > CRT2: INTERNAL_KLDSCP_DAC2 > DDC reg: 0x7e50 > XRANDR name: DVI-0 > Connector: DVI-I > CRT1: INTERNAL_KLDSCP_DAC1 > DFP1: INTERNAL_LVTM1 > DDC reg: 0x7e40 > Dac detection success > finished output detect: 0 > finished output detect: 1 > finished all detect > before xf86InitialConfiguration > Dac detection success > after xf86InitialConfiguration > Output DFP1 disable success > Blank CRTC 0 success > Disable CRTC 0 success > Blank CRTC 1 success > Disable CRTC 1 success > mc fb loc is 00df00d0 > /libexec/ld-elf.so.1: /usr/local/lib/xorg/modules/drivers//radeon_drv.so: > Undefined symbol "exaDriverAlloc" server# > > Unfortunately, the only way to recover is to reboot. The ati driver works fine on my amd64 7.2 system with a HD 2600 pro with a fairly recent snap of src and ports. Suggest that you rebuild as a minimum, the xserver and ati ports. If that doesn't work, rebuild the ports tree from scratch. > The radeonhd log is attached. Relevant dmesg output is: > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xde00-0xdeff mem > 0xd0000000-0xdfffffff,0xfdee0000-0xfdeeffff irq 18 at device 0.0 on pci1 > drm0: <Radeon HD 2400 Pro> on vgapci0 > info: [drm] MSI enabled 1 message(s) > vgapci0: child drm0 requested pci_enable_busmaster > info: [drm] Initialized radeon 1.29.0 20080528 > pci1: <multimedia, HDA> at device 0.1 (no driver attached)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200904152049.44291.vehemens>