Date: Wed, 11 Aug 1999 13:47:15 +0200 From: Geoff Rehmet <geoffr@is.co.za> To: "'brian@pobox.com'" <brian@pobox.com>, Soren Schmidt <sos@freebsd.dk>, Geoff Rehmet <geoffr@is.co.za> Cc: current@FreeBSD.ORG Subject: RE: ATA - Trouble mounting secondary master Message-ID: <E3453EC6C52ED3118E7E0090275CD47CFFAF63@isjhbex.is.co.za>
next in thread | raw e-mail | index | archive | help
FWIW, I am running a July 30th kernel. let me see if the problem comes back with a new CVSup. > -----Original Message----- > From: Brian McGroarty [mailto:bvmcg@yahoo.com] > Sent: 11 August 1999 01:41 > To: Soren Schmidt; geoffr@is.co.za > Cc: current@FreeBSD.ORG > Subject: Re: ATA - Trouble mounting secondary master > > > I've just tried and coming in via wd and ad produce the same > problem. > > Note my previous comment - the access light is a steady on for > this particular drive. It's left that way when devices are > probed during startup. > > My configuration FWIW - > > (Note that the devclass_alloc_unit messages are new as of > yesterday's cvsup and, presumably, unrelated.) > > Copyright (c) 1992-1999 The FreeBSD Project. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights > reserved. > FreeBSD 4.0-CURRENT #7: Tue Aug 10 22:13:10 CDT 1999 > Timecounter "i8254" frequency 1193182 Hz > CPU: Celeron (686-class CPU) > Origin = "GenuineIntel" Id = 0x665 Stepping = 5 > > Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP > ,MTRR,PGE,MCA,CM > OV,PAT,PSE36,MMX,FXSR> > real memory = 536870912 (524288K bytes) > avail memory = 518422528 (506272K bytes) > Programming 24 pins in IOAPIC #0 > FreeBSD/SMP: Multiprocessor motherboard > cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 > cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 > io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 > Preloaded elf kernel "kernel" at 0xc028f000. > Preloaded userconfig_script "/boot/kernel.conf" at 0xc028f09c. > Pentium Pro MTRR support enabled > Probing for PnP devices: > devclass_alloc_unit: pcib0 already exists, using next available > unit number > devclass_alloc_unit: pcib0 already exists, using next available > unit number > devclass_alloc_unit: pcib0 already exists, using next available > unit number > devclass_alloc_unit: pcib0 already exists, using next available > unit number > devclass_alloc_unit: pcib0 already exists, using next available > unit number > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on > motherboard > pci0: <PCI bus> on pcib0 > WARNING: "bktr" is usurping "bktr"'s cdevsw[] > pcib6: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device > 1.0 on pci0 > pci1: <PCI bus> on pcib6 > vga-pci0: <NVidia Riva TNT graphics accelerator> irq 16 at > device 0.0 on pci1 > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 > ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0 > ata-pci0: Busmastering DMA supported > ata0 at 0x01f0 irq 14 on ata-pci0 > ata1 at 0x0170 irq 15 on ata-pci0 > chip1: <UHCI USB controller> at device 7.2 on pci0 > chip2: <Intel 82371AB Power management controller> at device 7.3 > on pci0 > bktr0: <BrookTree 878> irq 16 at device 16.0 on pci0 > iicbb0: <I2C generic bit-banging driver> on bti2c0 > iicbus0: <Philips I2C bus> on iicbb0 master-only > smbus0: <System Management Bus> on bti2c0 > Hauppauge Model 62471 A > Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, dbx stereo. > pci0: unknown card DD^0878 (vendor=0x109e, dev=0x0878) at 16.1 > irq 16 > pcm0: <AudioPCI ES1370> irq 18 at device 18.0 on pci0 > pcm0: using I/O space register mapping at 0xef00 > fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 19 at device > 19.0 on pci0fxp0: Ethernet address 00:90:27:18:a6:fa > xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 16 at device 20.0 on > pci0 > xl0: Ethernet address: 00:50:04:01:77:7b > xl0: autoneg complete, link status good (half-duplex, 100Mbps) > devclass_alloc_unit: pci1 already exists, using next available > unit number > pcib1: <Host to PCI bridge> on motherboard > pci2: <PCI bus> on pcib1 > devclass_alloc_unit: pci2 already exists, using next available > unit number > pcib2: <Host to PCI bridge> on motherboard > pci3: <PCI bus> on pcib2 > devclass_alloc_unit: pci3 already exists, using next available > unit number > pcib3: <Host to PCI bridge> on motherboard > pci4: <PCI bus> on pcib3 > devclass_alloc_unit: pci4 already exists, using next available > unit number > pcib4: <Host to PCI bridge> on motherboard > pci5: <PCI bus> on pcib4 > devclass_alloc_unit: pci5 already exists, using next available > unit number > pcib5: <Host to PCI bridge> on motherboard > pci6: <PCI bus> on pcib5 > isa0: <ISA bus> on motherboard > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on > isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem > 0xa0000-0xbffff on isa0 > sc0: <System console> on isa0 > sc0: VGA <16 virtual consoles, flags=0x200> > APIC_IO: Testing 8254 interrupt delivery > APIC_IO: routing 8254 via pin 2 > IP packet filtering initialized, divert enabled, rule-based > forwarding disabled, > logging disabled > SMP: AP CPU #1 Launched! > ata0: master: setting up UDMA2 mode on PIIX4 chip OK > ad0: <IBM-DTTA-371440/T71OA73A> ATA-4 disk at ata0 as master > ad0: 13783MB (28229040 sectors), 28005 cyls, 16 heads, 63 S/T, > 512 B/S > ad0: piomode=4, dmamode=2, udmamode=2 > ad0: 16 secs/int, 31 depth queue, DMA mode > ata0: slave: setting up UDMA2 mode on PIIX4 chip OK > ad1: <IBM-DJNA-372200/J71OA30K> ATA-4 disk at ata0 as slave > ad1: 21557MB (44150400 sectors), 43800 cyls, 16 heads, 63 S/T, > 512 B/S > ad1: piomode=4, dmamode=2, udmamode=2 > ad1: 16 secs/int, 31 depth queue, DMA mode > ata1: master: setting up UDMA2 mode on PIIX4 chip OK > ad2: <IBM-DTTA-371440/T71OA73A> ATA-4 disk at ata1 as master > ad2: 13783MB (28229040 sectors), 28005 cyls, 16 heads, 63 S/T, > 512 B/S > ad2: piomode=4, dmamode=2, udmamode=2 > ad2: 16 secs/int, 31 depth queue, DMA mode > acd0: <CRW6206A/1.2A> CDROM drive at ata1 as slave > acd0: drive speed 344 - 1034KB/sec, 384KB cache > acd0: supported read types: CD-R, CD-RW, CD-DA, packet track > acd0: supported write types: CD-R, CD-RW, test write > acd0: Audio: play, 128 volume levels > acd0: Mechanism: ejectable tray > acd0: Medium: no/blank disc inside, unlocked, lock protected > changing root device to wd0s1a > changing root device to wd0a > > > > --- Soren Schmidt <sos@freebsd.dk> wrote: > > It seems Geoff Rehmet wrote: > > > Brian McGroarty writes : > > > > In using the ATA driver, I'm unable to automatically mount > > a > > > > partition on a master drive on the secondary controller. > > fsck > > > > complains that device rwd2s1e isn't configured and exists. > > > > Immediately mounting by hand works perfectly. > > > > > > > > Compiling the kernel with wd instead of ata eliminates the > > > > problem. > > > Hmm, > > > > > > I had exactly the same problem, although it manifested > > itself with a > > > secondary master or slave. It went away a few weeks ago, > > and I > > > was never able to make any sensible progress in tracking the > > problem > > > down. > > > > Hmm, damn, after the problem went away for Geoff I thought it > > to be > > solved since I've never heard of it anywhere else, and I cant > > reproduce > > it here no matter what I try. > > Does it help eany if you only has the root partition use the > > wd dev > > and have the rest use the prober ad dev entries ?? It could be > > some > > artifact from this... > > > > -Søren > > > > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E3453EC6C52ED3118E7E0090275CD47CFFAF63>