Date: Fri, 22 Aug 2003 21:39:45 -0700 From: Evren Yurtesen <yurtesen@ispro.net.tr> To: freebsd-questions@freebsd.org Subject: HP Netserver E60, SCSI question... Message-ID: <3F46F011.4020408@ispro.net.tr>
next in thread | raw e-mail | index | archive | help
Hi, I have a netserver with 4.8-stable installed. Whatever I do the freebsd finds my scsi drives as 10mbyte/sn huh... Any suggestions? ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0x1000-0x10ff mem 0xfc100000-0xfc100fff irq 5 at device 5.0 on pci0 ahc0: Using left over BIOS settings aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0x1400-0x14ff mem 0xfc101000-0xfc101fff irq 5 at device 5.1 on pci0 ahc1: Host Adapter Bios disabled. Using default SCSI device parameters aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs da0 at ahc0 bus 0 target 1 lun 0 da0: <HP 36.4G ST336706LW HP04> Fixed Direct Access SCSI-2 device da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 34732MB (71132960 512 byte sectors: 64H 32S/T 34732C) sync tranfer rate mb/sn :40 initiate wide negotiation: yes enable disconnection : yes send start unit command : yes enable writeback cache : n/c
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F46F011.4020408>