From owner-freebsd-arm@FreeBSD.ORG Sun Apr 6 21:51:11 2014 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 3BBBB556; Sun, 6 Apr 2014 21:51:11 +0000 (UTC) Received: from mailhost.netlab.sk (mailhost.netlab.sk [84.245.65.10]) (using SSLv3 with cipher DHE-RSA-CAMELLIA256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id D38A8FA9; Sun, 6 Apr 2014 21:51:10 +0000 (UTC) Received: from zeta.dino.sk (fw1.dino.sk [84.245.95.252]) (AUTH: LOGIN milan) by mailhost.netlab.sk with ESMTPA; Sun, 06 Apr 2014 23:51:12 +0200 id 0014206C.5341CC50.00013CA3 Date: Sun, 6 Apr 2014 23:51:07 +0200 From: Milan Obuch To: Andreas Tobler Subject: Re: MARVELL BOARD: RD-88F6281A -CURRENT Message-ID: <20140406235107.4445ec19@zeta.dino.sk> In-Reply-To: <5341C421.90209@fgznet.ch> References: <53406D94.5020605@fgznet.ch> <1396732234.81853.334.camel@revolution.hippie.lan> <53407B53.4040807@fgznet.ch> <1396737091.81853.339.camel@revolution.hippie.lan> <5341AE1C.4040207@fgznet.ch> <1396815052.81853.346.camel@revolution.hippie.lan> <5341BC93.6080105@fgznet.ch> <20140406230716.13113e35@zeta.dino.sk> <5341C421.90209@fgznet.ch> X-Mailer: Claws Mail 3.9.3 (GTK+ 2.24.22; i386-portbld-freebsd10.0) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-arm@FreeBSD.org, Ian Lepore X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: "Porting FreeBSD to ARM processors." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 06 Apr 2014 21:51:11 -0000 On Sun, 06 Apr 2014 23:16:17 +0200 Andreas Tobler wrote: > On 06.04.14 23:07, Milan Obuch wrote: > > On Sun, 06 Apr 2014 22:44:03 +0200 > > Andreas Tobler wrote: > > > >> On 06.04.14 22:10, Ian Lepore wrote: > >>> On Sun, 2014-04-06 at 21:42 +0200, Andreas Tobler wrote: > >>>> On 06.04.14 00:31, Ian Lepore wrote: > >>>>> On Sat, 2014-04-05 at 23:53 +0200, Andreas Tobler wrote: > > > > [ snip ] > > > >>>>>> Sure, now I 'hang' in an other area. > >>>>>> > >>>>>> mge0: mem 0x72000-0x73fff > >>>>>> irq 12,13,14,11,46 on simplebus0 > >>>>>> mge0: Ethernet address: 00:d0:b8:1e:3b:df > >>>>>> mge0: attaching PHYs failed > >>>>>> --> hangs > >>>>>> According to the u-boot env I have two eth's and only the > >>>>>> second is wired and used. > >>>>>> > >>>>>> From u-boot: > >>>>>> Net: egiga0, egiga1 [PRIME] > >>>>>> > >>>>>> Now my questions, how do I enable verbose boot? On PowerPC I > >>>>>> know I have to do it in boot/loader.conf, here too? > >>>>>> > >>>>>> I guess my hardware is different from an eval board, so I > >>>>>> expect I'd need a customized dts, no? If so, how do I get the > >>>>>> information out of the u-boot? > >>>>>> Again, thx a lot! > >>>>>> Andreas > >>>>> > >>>>> You're probably not even using loader(8) but rather launching > >>>>> the kernel directly (only newer arm systems and newer versions > >>>>> of u-boot use loader). That means things like tunables and > >>>>> bootverbose have to be hacked into the kernel, at least for now > >>>>> to make some progress. The initarm_early_init() routine in > >>>>> arm/mv/mv_machdep.c is a good place to throw in a bootverbose=1. > >>>> > >>>> Ok. I did it in sys/kern/init_main.c > >>>> > >>>>> For disabling egiga0 just add status="disabled" to its entry in > >>>>> the dts file. Have a look at the dreamplug dts files for an > >>>>> example of setting up egiga1, but I'm not sure everything will > >>>>> be exactly the same. You may need to transplant the phy0 entry > >>>>> from egiga0 into egiga1 for that box. > >>>> > >>>> Good start, thanks. > >>>> > >>>>> The 'bdinfo' command in u-boot sometimes shows lots of good > >>>>> info, sometimes not so much. > >>>> > >>>> Hm, this command is not available in my env. > >>>> Anyway, I figured to play with the regs in the enet dts section > >>>> and I managed to get it up. Unfortunately I don't get any dhcp > >>>> requests to the server, so no ack can be given. I'll play around. > >>>> > >>>> Sending DHCP Discover packet from interface mge0 > >>>> (00:d0:b8:1e:3b:df) .... > >>>> DHCP/BOOTP timeout for server 255.255.255.255 > >>>> .... > >>>> > >>>> Thanks again! > >>>> Andreas > >>> > >>> I just realized that there's likely to be dts source for that box > >>> in linux, and sure enough: > >>> > >>> https://github.com/torvalds/linux/blob/master/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts > >>> > >>> There should be a lot of good clues in there, although we're not > >>> quite so compatible that you can necessarily just paste linux dts > >>> code into our dts files. > >> > >> Yep, this is the place where I got the reg info, to change from xx > >> to 0xb to get the interface attached. But nevertheless, I do not > >> see any packets coming from this board. The tftpboot works, the > >> dhcp-server works too, tested with ppc netboot. But this board > >> does not really send out DHCPREQUESTS to the DHCP server. > >> > >> But maybe I hunt in the wrong place, I have to compare the other > >> entries. Right now I concentrated on the eth0/1 part. > >> > >> Thanks. > >> Andreas > >> > > > > Maybe you need to check pin multiplexer setup. If eth1 is not > > connected to pins, there is no connectivity. Some time ago I did > > have just this problem - no packets on the wire, but it looked like > > mge1 interface works well... after I found multiplexed pin setup, > > all was clear to me. > > Hm, would you mind giving me a hands on? Where and what do I have to > check? > > As said, new to the arm and fdt/dts world. > > TIA, > Andreas > Look into archives for this mailing list, my older message date Wed, 27 Oct 2010 22:59:34 with subject 'Re: Guruplug Server Plus working to some extent... [mge1 problem SOLVED]' has my dts where I solved just MPP (multipurpose pin) setup problem, similar to yours I think. Look for block MPP: mpp@10000 in there dts, maybe it could give you a hint about setup of MPP for you. Regards, Milan