Date: Sat, 27 May 2006 22:37:49 +0200 From: Jorn Argelo <jorn@wcborstel.com> To: Mike <mike@uniserve.com> Cc: freebsd-questions@freebsd.org Subject: Re: Kernel Panic on FreeBSD 6.1 with Dell PE1850 / 1750 Message-ID: <4478B89D.6040003@wcborstel.com> In-Reply-To: <049501c681c6$1d388970$0501000a@panic> References: <20060527185918.3BE4E43D48@mx1.FreeBSD.org> <4478A697.7000901@wcborstel.com> <049501c681c6$1d388970$0501000a@panic>
next in thread | previous in thread | raw e-mail | index | archive | help
Mike wrote: >> Mike wrote: >> >>> Hello, >>> >>> I got a handful of Dell PE1850 and PE1750 boxes running mail >>> scanning that we recently upgraded to FreeBSD 6.1. >>> >>> It started with a new PE1850 (mx4) that we immediately installed 6.1 >>> on, which started having kernel panics- we initially blamed it >>> on hardware. But last week, we rebuild a PE1750 (mx6) we've been >>> running for over a year with FBSD 4.11 without any problems, >>> and it's crashing now as well. >>> >>> Are there any known issues with FreeBSD 6.1 on any of the Dell >>> PE series machines? >>> >>> Any thoughts would be great, >>> >>> Mike >>> >>> >>> Some details: >>> >>> PE1850 >>> --snip-- >>> >>> FreeBSD mx4 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Mon May 15 18:55:30 PDT >>> > 2006 > >>> mike@build.office:/usr/obj/usr/src/sys/U_GENERIC_SMP i386 >>> >>> Fatal trap 12: page fault while in kernel mode >>> cpuid = 0; apic id = 00 >>> fault virtual address = 0x5c >>> fault code = supervisor read, page not present >>> instruction pointer = 0x20:0xc072dbda >>> stack pointer = 0x28:0xea9b9a98 >>> frame pointer = 0x28:0xea9b9b28 >>> code segment = base 0x0, limit 0xfffff, type 0x1b >>> = DPL 0, pres 1, def32 1, gran 1 >>> processor eflags = interrupt enabled, resume, IOPL = 0 >>> current process = 20764 (exim-4.60-1) >>> trap number = 12 >>> panic: page fault >>> cpuid = 0 >>> Uptime: 10d13h1m4s >>> Dumping 3071 MB (2 chunks) >>> chunk 0: 1MB (159 pages) ... ok >>> chunk 1: 3071MB (786112 pages) 3055 3039 3823 3007 2991 >>> >>> --snip-- >>> >>> >>> PE1750 >>> --snip-- >>> >>> FreeBSD mx6 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Mon May 15 18:55:30 PDT >>> > 2006 > >>> mike@build.office:/usr/obj/usr/src/sys/U_GENERIC_SMP i386 >>> >>> Fatal trap 12: page fault while in kernel mode >>> cpuid = 2; apic id = 06 >>> fault virtual address = 0x5c >>> fault code = supervisor read, page not present >>> instruction pointer = 0x20:0xc072dbda >>> stack pointer = 0x28:0xf2791a98 >>> frame pointer = 0x28:0xf2791b28 >>> code segment = base 0x0, limit 0xfffff, type 0x1b >>> = DPL 0, pres 1, def32 1, gran 1 >>> processor eflags = interrupt enabled, resume, IOPL = 0 >>> current process = 60007 (exim-4.60-1) >>> trap number = 12 >>> panic: page fault >>> cpuid = 2 >>> Uptime: 2d16h44m0s >>> Dumping 3071 MB (2 chunks) >>> chunk 0: 1MB (159 pages) ... ok >>> chunk 1: 3071MB (786135 pages) 3055 3039 >>> >>> --snip-- >>> >>> >>> >>> _______________________________________________ >>> freebsd-questions@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>> To unsubscribe, send any mail to >>> > "freebsd-questions-unsubscribe@freebsd.org" > >> I am running 6.1-STABLE on a Dell PE 1850 very smoothly actually. The >> machine is rock-solid and a constant load of 5-10. Can you give me a >> dmesg output? Maybe the hardware isn't identical to the setup we have, >> or maybe something isn't right in your kernel config. >> >> Jorn >> >> Jorn >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to >> > "freebsd-questions-unsubscribe@freebsd.org" > > Sure- from the PE1850 > > --snip-- > > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.1-RELEASE #0: Mon May 15 18:55:30 PDT 2006 > mike@build.office:/usr/obj/usr/src/sys/U_GENERIC_SMP > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3591.25-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA > ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x659d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,CX16,<b14>> > AMD Features=0x20100000<NX,LM> > Logical CPUs per core: 2 > real memory = 3220963328 (3071 MB) > avail memory = 3151040512 (3005 MB) > ACPI APIC Table: <DELL PE BKC > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 6 > cpu3 (AP): APIC ID: 7 > ioapic0: Changing APIC ID to 8 > ioapic1: Changing APIC ID to 9 > ioapic1: WARNING: intbase 32 != expected base 24 > ioapic2: Changing APIC ID to 10 > ioapic2: WARNING: intbase 64 != expected base 56 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 32-55 on motherboard > ioapic2 <Version 2.0> irqs 64-87 on motherboard > kbd1 at kbdmux0 > acpi0: <DELL PE BKC> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 > pci2: <ACPI PCI bus> on pcib2 > amr0: <LSILogic MegaRAID 1.53> mem > 0xf80f0000-0xf80fffff,0xfe9e0000-0xfe9fffff irq 46 at device 14.0 on pci2 > amr0: delete logical drives supported by controller > amr0: <LSILogic PERC 4e/Si> Firmware 521X, BIOS H430, 256MB RAM > pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5 > pci6: <ACPI PCI bus> on pcib6 > em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port > 0xecc0-0xecff mem 0xfe6e0000-0xfe6fffff irq 64 at device 7.0 on pci6 > em0: Ethernet address: 00:13:72:51:fd:9c > pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5 > pci7: <ACPI PCI bus> on pcib7 > em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port > 0xdcc0-0xdcff mem 0xfe4e0000-0xfe4fffff irq 65 at device 8.0 on pci7 > em1: Ethernet address: 00:13:72:51:fd:9d > pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pci8: <ACPI PCI bus> on pcib8 > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff irq 16 > at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf irq 19 > at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf irq 18 > at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfeb00000-0xfeb003ff > irq 23 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub3: 6 ports with 6 removable, self powered > uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2 > uhub4: multiple transaction translators > uhub4: 2 ports with 2 removable, self powered > pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci9: <ACPI PCI bus> on pcib9 > pci9: <display, VGA> at device 13.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH5 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xec000-0xeffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33 > amr0: delete logical drives supported by controller > amrd0: <LSILogic MegaRAID logical drive> on amr0 > amrd0: 69880MB (143114240 sectors) RAID 1 (optimal) > SMP: AP CPU #2 Launched! > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > Trying to mount root from ufs:/dev/amrd0s1a > WARNING: / was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /u was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > /var: mount pending error: blocks 132 files 35 > em0: link state changed to UP > em1: link state changed to UP > > --snip-- > > As far as the kernel, we're running a GENERIC kernel, with the following > added at the end. > > --snip-- > > # > # Standard Options > # > options SMP > options QUOTA > > # > # Support for pf and carp > # > device carp > device vlan > device pf > device pflog > device pfsync > > options ALTQ > options ALTQ_CBQ # Class Bases Queueing > options ALTQ_RED # Random Early Drop > options ALTQ_RIO # RED In/Out > options ALTQ_HFSC # Hierarchical Packet Scheduler > options ALTQ_CDNR # Traffic conditioner > options ALTQ_PRIQ # Priority Queueing > > --snip-- > > Was there anything specific you added/removed from your kernel? > > Thanks for your help Jorn, > > Mike > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > The only major difference I could discover is that I disabled Hyperthreading. And I don't have PF or ALTQ support in the kernel. I only disabled some things I would absolutely not use at all. As Ted correctly mentioned, BIOS and firmware versions can make a major difference. Unfortunately I don't know them out of my head and I can't check them easily. I think the BIOS version I'm using is A02 or A03. No idea about the firmware version. Jorn.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4478B89D.6040003>