Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 29 Feb 2004 18:29:44 -0500
From:      "Mike Schreckengost" <mrpolitics@hotmail.com>
To:        freebsd-current@freebsd.org
Subject:   ata request_sense illegal request 
Message-ID:  <Law9-F509v0utoZQCUi000230f3@hotmail.com>

next in thread | raw e-mail | index | archive | help
I am having *exactly* the same problem on my system. Without CDs in the 
drive, the system just hangs. With CDs in the drive, it boots (with errors, 
as shown below) but for some reason it suddenly locked up hard when starting 
KDE ... don't know if this is a related problem or not.

'boot -v' provides an endless string of:
(probe0:ata1:0:0:0): Retrying Command

... messages (without CDs in the drive). I hope this helps, if anyone needs 
more information don't hesitate to ask. :-)

Thanks,
Mike

Feb 29 18:16:00 ulb kernel: Copyright (c) 1992-2004 The FreeBSD Project.
Feb 29 18:16:00 ulb kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 
1989, 19
91, 1992, 1993, 1994
Feb 29 18:16:00 ulb kernel: The Regents of the University of California. All 
rig
hts reserved.
Feb 29 18:16:00 ulb kernel: FreeBSD 5.2-CURRENT #20: Sun Feb 29 17:31:10 EST 
200
4
Feb 29 18:16:00 ulb kernel: root@ulb.home.net:/usr/obj/usr/src/sys/ULB
Feb 29 18:16:00 ulb kernel: WARNING: WITNESS option enabled, expect reduced 
perf
ormance.
Feb 29 18:16:00 ulb kernel: Preloaded elf kernel "/boot/kernel/kernel" at 
0xc09f
b000.
Feb 29 18:16:00 ulb kernel: Preloaded elf module 
"/boot/kernel/snd_emu10k1.ko" a
t 0xc09fb294.
Feb 29 18:16:00 ulb kernel: Preloaded elf module "/boot/kernel/snd_pcm.ko" 
at 0x
c09fb344.
Feb 29 18:16:00 ulb kernel: Preloaded elf module "/boot/modules/nvidia.ko" 
at 0x
c09fb3f0.
Feb 29 18:16:00 ulb kernel: Preloaded elf module "/boot/kernel/linprocfs.ko" 
at
0xc09fb49c.
Feb 29 18:16:00 ulb kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 
0xc09
fb54c.
Feb 29 18:16:00 ulb kernel: ACPI APIC Table: <PTLTD      APIC  >
Feb 29 18:16:00 ulb kernel: Timecounter "i8254" frequency 1193182 Hz quality 
0
Feb 29 18:16:00 ulb kernel: CPU: AMD Athlon(tm) MP 2100+ (1733.41-MHz 
686-class
CPU)
Feb 29 18:16:00 ulb kernel: Origin = "AuthenticAMD"  Id = 0x662  Stepping = 
2
Feb 29 18:16:00 ulb kernel: 
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX
8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
Feb 29 18:16:00 ulb kernel: AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
Feb 29 18:16:00 ulb kernel: real memory  = 1073217536 (1023 MB)
Feb 29 18:16:00 ulb kernel: avail memory = 1040629760 (992 MB)
Feb 29 18:16:00 ulb kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 
CPUs
Feb 29 18:16:00 ulb kernel: cpu0 (BSP): APIC ID:  1
Feb 29 18:16:00 ulb kernel: cpu1 (AP): APIC ID:  0
Feb 29 18:16:00 ulb kernel: ioapic0 <Version 1.1> irqs 0-23 on motherboard
Feb 29 18:16:00 ulb kernel: Pentium Pro MTRR support enabled
Feb 29 18:16:00 ulb kernel: npx0: [FAST]
Feb 29 18:16:00 ulb kernel: npx0: <math processor> on motherboard
Feb 29 18:16:00 ulb kernel: npx0: INT 16 interface
Feb 29 18:16:00 ulb kernel: acpi0: <PTLTD   RSDT> on motherboard
Feb 29 18:16:00 ulb kernel: pcibios: BIOS version 2.10
Feb 29 18:16:00 ulb kernel: Found $PIR table, 14 entries at 0xc00fdee0
Feb 29 18:16:00 ulb kernel: acpi0: Power Button (fixed)
Feb 29 18:16:00 ulb kernel: acpi0: Sleep Button (fixed)
Feb 29 18:16:00 ulb kernel: Timecounter "ACPI-fast" frequency 3579545 Hz 
quality
1000
Feb 29 18:16:00 ulb kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 
0x80
08-0x800b on acpi0
Feb 29 18:16:00 ulb kernel: acpi_cpu0: <CPU> on acpi0
Feb 29 18:16:00 ulb kernel: acpi_cpu1: <CPU> on acpi0
Feb 29 18:16:00 ulb kernel: acpi_button0: <Power Button> on acpi0
Feb 29 18:16:00 ulb kernel: pcib0: <ACPI Host-PCI bridge> port 
0x8080-0x80ff,0x8
000-0x807f,0xcf8-0xcff iomem 0xd8000-0xdbfff on acpi0
Feb 29 18:16:00 ulb kernel: pci0: <ACPI PCI bus> on pcib0
Feb 29 18:16:00 ulb kernel: agp0: <AMD 762 host to AGP bridge> port 
0x1010-0x101
3 mem 0xeb200000-0xeb200fff,0xec000000-0xefffffff at device 0.0 on pci0
Feb 29 18:16:00 ulb kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on 
pci0
Feb 29 18:16:00 ulb kernel: pci1: <ACPI PCI bus> on pcib1
Feb 29 18:16:00 ulb kernel: nvidia0: <GeForce4 Ti 4600> mem 
0xf8000000-0xf807fff
f,0xf0000000-0xf7ffffff,0xe8000000-0xe8ffffff irq 17 at device 5.0 on pci1
Feb 29 18:16:00 ulb kernel: isab0: <PCI-ISA bridge> at device 7.0 on pci0
Feb 29 18:16:00 ulb kernel: isa0: <ISA bus> on isab0
Feb 29 18:16:00 ulb kernel: atapci0: <AMD 768 UDMA100 controller> port 
0xf000-0x
f00f at device 7.1 on pci0
Feb 29 18:16:00 ulb kernel: ata0: at 0x1f0 irq 14 on atapci0
Feb 29 18:16:00 ulb kernel: ata0: [MPSAFE]
Feb 29 18:16:00 ulb kernel: ata1: at 0x170 irq 15 on atapci0
Feb 29 18:16:00 ulb kernel: ata1: [MPSAFE]
Feb 29 18:16:00 ulb kernel: pci0: <bridge, PCI-unknown> at device 7.3 (no 
driver
attached)
Feb 29 18:16:00 ulb kernel: pcib2: <ACPI PCI-PCI bridge> at device 16.0 on 
pci0
Feb 29 18:16:00 ulb kernel: pci2: <ACPI PCI bus> on pcib2
Feb 29 18:16:00 ulb kernel: pcm0: <Creative EMU10K1> port 0x2800-0x281f irq 
16 a
t device 4.0 on pci2
Feb 29 18:16:00 ulb kernel: pcm0: <SigmaTel STAC9708/11 AC97 Codec>
Feb 29 18:16:00 ulb kernel: ohci0: <NEC uPD 9210 USB controller> mem 
0xe9001000-
0xe9001fff irq 17 at device 5.0 on pci2
Feb 29 18:16:00 ulb kernel: usb0: OHCI version 1.0
Feb 29 18:16:00 ulb kernel: usb0: <NEC uPD 9210 USB controller> on ohci0
Feb 29 18:16:00 ulb kernel: usb0: USB revision 1.0
Feb 29 18:16:00 ulb kernel: uhub0: NEC OHCI root hub, class 9/0, rev 
1.00/1.00,
addr 1
Feb 29 18:16:00 ulb kernel: uhub0: 3 ports with 3 removable, self powered
Feb 29 18:16:00 ulb kernel: ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, 
icl
ass 3/1
Feb 29 18:16:00 ulb kernel: ums0: 3 buttons and Z dir.
Feb 29 18:16:00 ulb kernel: umass0: Behavior Tech. Computer USB 2.0 Storage 
Devi
ce, rev 2.00/1.03, addr 3
Feb 29 18:16:00 ulb kernel: ohci1: <NEC uPD 9210 USB controller> mem 
0xe9002000-
0xe9002fff irq 18 at device 5.1 on pci2
Feb 29 18:16:00 ulb kernel: usb1: OHCI version 1.0
Feb 29 18:16:00 ulb kernel: usb1: <NEC uPD 9210 USB controller> on ohci1
Feb 29 18:16:00 ulb kernel: usb1: USB revision 1.0
Feb 29 18:16:00 ulb kernel: uhub1: NEC OHCI root hub, class 9/0, rev 
1.00/1.00,
addr 1
Feb 29 18:16:00 ulb kernel: uhub1: 2 ports with 2 removable, self powered
Feb 29 18:16:00 ulb kernel: uscanner0: Canon CanoScan, rev 1.00/1.00, addr 2
Feb 29 18:16:00 ulb kernel: pci2: <serial bus, USB> at device 5.2 (no driver 
att
ached)
Feb 29 18:16:00 ulb kernel: atapci1: <HighPoint HPT370 UDMA100 controller> 
port
0x2000-0x20ff,0x2828-0x282b,0x2830-0x2837,0x282c-0x282f,0x2838-0x283f irq 18 
at
device 6.0 on pci2
Feb 29 18:16:00 ulb kernel: atapci1: [MPSAFE]
Feb 29 18:16:00 ulb kernel: ata2: at 0x2838 on atapci1
Feb 29 18:16:00 ulb kernel: ata2: [MPSAFE]
Feb 29 18:16:00 ulb kernel: ata3: at 0x2830 on atapci1
Feb 29 18:16:00 ulb kernel: ata3: [MPSAFE]
Feb 29 18:16:00 ulb kernel: pci2: <display, VGA> at device 7.0 (no driver 
attach
ed)
Feb 29 18:16:00 ulb kernel: xl0: <3Com 3c980C Fast Etherlink XL> port 
0x2400-0x2
47f mem 0xe9003400-0xe900347f irq 18 at device 8.0 on pci2
Feb 29 18:16:00 ulb kernel: xl0: Ethernet address: 00:e0:81:22:5b:f4
Feb 29 18:16:00 ulb kernel: miibus0: <MII bus> on xl0
Feb 29 18:16:00 ulb kernel: ukphy0: <Generic IEEE 802.3u media interface> on 
mii
bus0
Feb 29 18:16:00 ulb kernel: ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 
100baseTX-
FDX, auto
Feb 29 18:16:00 ulb kernel: xl1: <3Com 3c980C Fast Etherlink XL> port 
0x2480-0x2
4ff mem 0xe9003800-0xe900387f irq 19 at device 9.0 on pci2
Feb 29 18:16:00 ulb kernel: xl1: Ethernet address: 00:e0:81:22:5b:f5
Feb 29 18:16:00 ulb kernel: miibus1: <MII bus> on xl1
Feb 29 18:16:00 ulb kernel: ukphy1: <Generic IEEE 802.3u media interface> on 
mii
bus1
Feb 29 18:16:00 ulb kernel: ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 
100baseTX-
FDX, auto
Feb 29 18:16:00 ulb kernel: atkbdc0: <Keyboard controller (i8042)> port 
0x64,0x6
0 irq 1 on acpi0
Feb 29 18:16:00 ulb kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Feb 29 18:16:00 ulb kernel: kbd0 at atkbd0
Feb 29 18:16:00 ulb kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
Feb 29 18:16:00 ulb kernel: sio0: type 16550A
Feb 29 18:16:00 ulb kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0
Feb 29 18:16:00 ulb kernel: sio1: type 16550A
Feb 29 18:16:00 ulb kernel: ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on 
acp
i0
Feb 29 18:16:00 ulb kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in 
COMPA
TIBLE mode
Feb 29 18:16:00 ulb kernel: ppc0: FIFO with 16/16/9 bytes threshold
Feb 29 18:16:00 ulb kernel: ppbus0: <Parallel port bus> on ppc0
Feb 29 18:16:00 ulb kernel: lpt0: <Printer> on ppbus0
Feb 29 18:16:00 ulb kernel: lpt0: Interrupt-driven port
Feb 29 18:16:00 ulb kernel: fdc0: <Enhanced floppy controller (i82077, 
NE72065 o
r clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
Feb 29 18:16:00 ulb kernel: fdc0: FIFO enabled, 8 bytes threshold
Feb 29 18:16:00 ulb kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Feb 29 18:16:00 ulb kernel: orm0: <Option ROMs> at iomem 
0xe0000-0xe3fff,0xcf800
-0xcffff,0xcf000-0xcf7ff on isa0
Feb 29 18:16:00 ulb kernel: pmtimer0 on isa0
Feb 29 18:16:00 ulb kernel: sc0: <System console> at flags 0x100 on isa0
Feb 29 18:16:00 ulb kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Feb 29 18:16:00 ulb kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df 
iomem 0x
a0000-0xbffff on isa0
Feb 29 18:16:00 ulb kernel: Timecounters tick every 10.000 msec
Feb 29 18:16:00 ulb kernel: afd0: REMOVABLE <IOMEGA ZIP 250 ATAPI> at 
ata0-maste
r PIO3
Feb 29 18:16:00 ulb kernel: acd0: CDRW <CD-RW IDE5232> at ata0-slave PIO4
Feb 29 18:16:00 ulb kernel: acd1: CDRW <Memorex DVD+R/RW 2.4x8AA> at 
ata1-master
PIO4
Feb 29 18:16:00 ulb kernel: ad3: 114473MB <WDC WD1200BB-00CAA1> 
[232581/16/63] a
t ata1-slave UDMA100
Feb 29 18:16:00 ulb kernel: ad4: 114473MB <WDC WD1200JB-00CRA1> 
[232581/16/63] a
t ata2-master UDMA100
Feb 29 18:16:00 ulb kernel: ad6: 76319MB <WDC WD800BB-00CAA0> [155061/16/63] 
at
ata3-master UDMA100
Feb 29 18:16:00 ulb kernel: acd1: FAILURE - REQUEST_SENSE ILLEGAL REQUEST 
asc=0x
24 ascq=0x00 status=50<READY,DSC> error=0
Feb 29 18:16:00 ulb kernel: acd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST 
asc=0x
24 ascq=0x00 status=50<READY,DSC> error=0
Feb 29 18:16:00 ulb kernel: afd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST 
asc=0x
24 ascq=0x00 status=50<READY,DSC> error=0
Feb 29 18:16:00 ulb kernel: acd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST 
asc=0x
24 ascq=0x00 status=50<READY,DSC> error=0
Feb 29 18:16:00 ulb kernel: afd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST 
asc=0x
24 ascq=0x00 status=50<READY,DSC> error=0
Feb 29 18:16:00 ulb kernel: SMP: AP CPU #1 Launched!
Feb 29 18:16:00 ulb kernel: da0 at ata0 bus 0 target 0 lun 0
Feb 29 18:16:00 ulb kernel: da0: <IOMEGA ZIP 250 42.S> Removable Direct 
Access S
CSI-0 device
Feb 29 18:16:00 ulb kernel: da0: 11.000MB/s transfers
Feb 29 18:16:00 ulb kernel: da0: 239MB (489532 512 byte sectors: 64H 32S/T 
239C)
Feb 29 18:16:00 ulb kernel: cd2 at ata1 bus 0 target 0 lun 0
Feb 29 18:16:00 ulb kernel: cd2: <Memorex DVD+R/RW 2.4x8AA 1.51> Removable 
CD-RO
M SCSI-0 device
Feb 29 18:16:00 ulb kernel: cd2: 16.000MB/s transfers
Feb 29 18:16:00 ulb kernel: cd2: cd present [1 x 2048 byte records]
Feb 29 18:16:00 ulb kernel: cd1 at ata0 bus 0 target 1 lun 0
Feb 29 18:16:00 ulb kernel: cd1: <CDWRITER IDE5232 000F> Removable CD-ROM 
SCSI-0
device
Feb 29 18:16:00 ulb kernel: cd1: 16.000MB/s transfers
Feb 29 18:16:00 ulb kernel: cd1: cd present [104672 x 2048 byte records]
Feb 29 18:16:00 ulb kernel: cd0 at umass-sim0 bus 0 target 0 lun 0
Feb 29 18:16:00 ulb kernel: cd0: <CDWRITER IDE5232 0009> Removable CD-ROM 
SCSI-0
device
Feb 29 18:16:00 ulb kernel: cd0: 1.000MB/s transfers
Feb 29 18:16:00 ulb kernel: cd0: Attempt to query device size failed: NOT 
READY,
Medium not present - tray closed
Feb 29 18:16:00 ulb kernel: acd1: FAILURE - REQUEST_SENSE ILLEGAL REQUEST 
asc=0x
24 ascq=0x00 status=50<READY,DSC> error=0
Feb 29 18:16:00 ulb last message repeated 2 times
Feb 29 18:16:00 ulb kernel: acd1: FAILURE - REQUEST_SENSE ILLEGAL REQUEST 
asc=0x
64 ascq=0x01 status=50<READY,DSC> error=0
Feb 29 18:16:00 ulb kernel: acd1: FAILURE - REQUEST_SENSE ILLEGAL REQUEST 
asc=0x
24 ascq=0x00 status=50<READY,DSC> error=0
Feb 29 18:16:00 ulb last message repeated 2 times
Feb 29 18:16:00 ulb kernel: acd1: FAILURE - REQUEST_SENSE ILLEGAL REQUEST 
asc=0x
64 ascq=0x01 status=50<READY,DSC> error=0
Feb 29 18:16:00 ulb kernel: Mounting root from ufs:/dev/ad3s2a

Paulius Bulotas <paulius@kaktusas.org> wrote:

>Hello,
>
>after upgrading to new ata code (REQUEST_SENSE feature), I'm unable to
>boot from disk without media in my cdrom ;)
>Everything looks like:
>acd0: CDRW <TOSHIBA DVD-ROM SD-R9012> at ata1-master UDMA33
>acd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x24 ascq=0x00
>sks=0x40 0x00 0x01 status=50<READY,DSC> error=0
>and pause [if I boot with -v, I see a lot of
>(probe0:ata1:0:0:0): Retrying Command
>]
>
>after inserting cd, everything goes almost fine:
>acd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x24 ascq=0x00
>sks=0x40 0x00 0

_________________________________________________________________
Take off on a romantic weekend or a family adventure to these great U.S. 
locations. http://special.msn.com/local/hotdestinations.armx



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Law9-F509v0utoZQCUi000230f3>