Date: Tue, 23 Sep 2014 14:54:18 +0200 From: Maciej Milewski <milu@dat.pl> To: =?windows-1252?Q?Peter_Ankerst=E5l?= <peter@pean.org>, freebsd-stable@freebsd.org Subject: Re: FreeBSD with Huawei 3g modem. Message-ID: <54216D7A.80708@dat.pl> In-Reply-To: <54216B81.6030306@pean.org> References: <54215969.1070303@pean.org> <542169D6.8090904@dat.pl> <54216B81.6030306@pean.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 23.09.2014 14:45, Peter Ankerstål wrote: > On 09/23/2014 02:38 PM, Maciej Milewski wrote: >> On 23.09.2014 13:28, Peter Ankerstål wrote: >>> Hi! >>> >>> Im trying to get a Huawei E3531 to work in FreeBSD. But Im not really >>> sure where to start. I found this: >>> http://technotation.com/2012/08/15/freebsd-and-mobile-broadband/ but >>> havent had any luck cut and pasting here. >>> >>> System: >>> # uname -srm >>> FreeBSD 10.0-RELEASE amd64 >>> >>> When I connect it dmesg says: >>> usb_alloc_device: Found possible auto-install disk (trying next config) >>> ugen0.4: <HUAWEI> at usbus0 >>> umass0: <HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 4> on >>> usbus0 >>> umass0: SCSI over Bulk-Only; quirks = 0x0000 >>> umass0:5:0:-1: Attached to scbus5 >>> da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 >>> da0: <HUAWEI TF CARD Storage 2.31> Removable Direct Access SCSI-2 >>> device >>> da0: Serial Number FFFFFFFFFFFFFFFF >>> da0: 40.000MB/s transfers >>> da0: Attempt to query device size failed: NOT READY, Medium not present >>> da0: quirks=0x2<NO_6_BYTE> >>> >>> usbconfig gives this: >>> >>> # usbconfig -u 0 -a 4 dump_device_desc >>> ugen0.4: <HUAWEI Mobile HUAWEI> at usbus0, cfg=1 md=HOST spd=HIGH >>> (480Mbps) pwr=ON (500mA) >>> >>> bLength = 0x0012 >>> bDescriptorType = 0x0001 >>> bcdUSB = 0x0200 >>> bDeviceClass = 0x0000 >>> bDeviceSubClass = 0x0000 >>> bDeviceProtocol = 0x00ff >>> bMaxPacketSize0 = 0x0040 >>> idVendor = 0x12d1 >>> idProduct = 0x157d >>> bcdDevice = 0x0102 >>> iManufacturer = 0x0001 <HUAWEI> >>> iProduct = 0x0002 <HUAWEI Mobile> >>> iSerialNumber = 0x0003 <FFFFFFFFFFFFFFFF> >>> bNumConfigurations = 0x0002 >>> >>> >> Peter, >> cut and paste is the last step(for copying ppp script ;P ) >> Before that you need to setup your system to recognize that modem. >> First check if the idProduct is listed in your usbdevs. If not you need >> to add it similar way like are other. >> For example E3131 is added like that: >> root@backup:/usr/src/sys/dev/usb # grep -Hr E3131 * >> serial/u3g.c: U3G_DEV(HUAWEI, E3131, 0), >> serial/u3g.c: U3G_DEV(HUAWEI, E3131_INIT, U3GINIT_HUAWEISCSI), >> usbdevs:product HUAWEI E3131_INIT 0x14fe 3G modem initial >> usbdevs:product HUAWEI E3131 0x1506 3G modem >> >> Then recompile and install kernel and try if that helps. I'm not sure if >> compiling u3g module is enough that's why I suggested whole kernel >> recompiling. >> > Yes, this is exactly what I have done, except that I dont know the > "INIT" one. > > And no, I did not recompile the kernel, just u3g. > I suspect that INIT is how that modem presents at the first connection before sending any command(like U3GINIT_HUAWEI) It might be that this device needs another initialization string like Huawei E3272. Search archives on mail from 16.09.2014 with Subject: Huawei E3272 tester needed You may find there another hints. -- Pozdrawiam, Maciej Milewski
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?54216D7A.80708>