Date: Sat, 10 Sep 2005 10:19:26 +0200 From: "Schleich, Arno" <A.Schleich@klinikum-tut.de> To: "cpghost" <cpghost@cordula.ws> Cc: aschleichmd@hotmail.com, freebsd-questions@freebsd.org Subject: AW: PPPoE to connect to T-DSL Message-ID: <BD115D417B32A745A5D9AC08CF1A620C44CFB3@ktex1.kktut.local>
next in thread | raw e-mail | index | archive | help
Cpghost, Tx a lot, I managed to connect as root. Your ppo.conf was nearly = identical to trhe one I had used with the exception to 'disable lqr' (I = had it enabled) and 'set echoperiod 30'/ 'enable echo'. After adding = these it worked, don't ask me why. Still have the problem of no ppp as an ordinary user (member of wheel, = network), Is there anything I need to do besides adding 'allow users = <user_name> ? Thanks, Arno -----Urspr=FCngliche Nachricht----- Von: cpghost [mailto:cpghost@cordula.ws]=20 Gesendet: Donnerstag, 8. September 2005 15:08 An: Schleich, Arno Cc: freebsd-questions@freebsd.org Betreff: Re: PPPoE to connect to T-DSL On Thu, Sep 08, 2005 at 02:32:19PM +0200, Schleich, Arno wrote: > I just need to connect my notebook to the internet using pppoe to hook > up to t-dsl, a German adsl provider. > =20 > I installed 5.4 Release with very few problems. > =20 > Anyway, trying to use the most generic ppp.conf it hangs in 'Phase' = (as > far as I can understand the log). It redials and redials, which = results > in multiple > =20 > deflink: Connected > deflink: Hangup > =20 > sequences in the /var/lod/ppp.log. Btw, I upped the rl0 interface = prior > to starting ppp, so I hope this is not an issue. There is no activity = on > the LEDs of the dsl modem. Hello Arno, I know definitely that the following configuration works with kamp-dsl, a provider that uses t-dsl (yes, on FreeBSD 5.4-STABLE). /etc/ppp/ppp.conf: ------------------ default: set log local Phase Chat Connect LCP IPCP tun command myadsl: set device PPPoE:rl0 set MTU 1460 set MRU 1460 set dial set crtscts off set speed sync disable lqr set echoperiod 30 enable echo disable deflate disable pred1 disable vjcomp disable acfcomp disable protocomp set log Phase LCP IPCP CCP Warning Error Alert set ifaddr 10.0.0.1/0 10.0.0.2/0 0.0.0.0 0.0.0.0 set login set authname <your_authname> set authkey <your_authkey> set timeout 0 add default HISADDR set server /var/run/internet "" 0177 You can enable ppp at bootup by adding this to /etc/rc.conf: ppp_enable=3D"YES" ppp_profile=3D"myadsl" ppp_user=3D"root" ppp_mode=3D"ddial" ppp_nat=3D"YES" Or run ppp manually like this: # /usr/sbin/ppp -quiet -ddial -nat myadsl Should you still not be able to connect, please have a closer look at /var/log/ppp.log. You may also want to # tcpdump -i rl0 to see if the PADI/PADO/PADR/PADS handshake completes successfully. Good luck! -cpghost. --=20 Cordula's Web. http://www.cordula.ws/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BD115D417B32A745A5D9AC08CF1A620C44CFB3>