Date: Sat, 28 Jun 2003 19:17:09 -0700 (PDT) From: manee <radwasteus@yahoo.com> To: freebsd-questions@freebsd.org Cc: freebsd-stable@freebsd.org Subject: hard disk error , run fsck manually Message-ID: <20030629021709.16663.qmail@web21504.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
--0-663912449-1056853029=:16358 Content-Type: text/plain; charset=us-ascii Content-Id: Content-Disposition: inline hi sirs, i face problem of hard disk error because of the power downed during using the machine. once the power is coming, my machine stuck at file system is still dirty please run fsck manually. the partion that is dirty is /dev/ad0s2g, a home partion one. i did run fsck /dev/ad0s2g several times but still get the same message. what i decided to do was that to edit /etc/fstab and put read only option for /dev/ad0s2g and exited a single mode. i got a message said that /home was not dismount, as you see in the attachment. up to this point, only root that can log in. my question is that are there any method to recover an fsck error during boot time? please cc to me since i do not a member of the list. with best regards, ===== มานี http://www.thai-aec.org __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com --0-663912449-1056853029=:16358 Content-Type: text/plain; name="First-hd-error.txt" Content-Description: First-hd-error.txt Content-Disposition: inline; filename="First-hd-error.txt" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-STABLE #2: Sun Jun 1 18:59:28 ICT 2003 root@bank.thai-aec.org:/usr/obj/usr/src/sys/Bank Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Celeron(TM) CPU 1100MHz (1102.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 125763584 (122816K bytes) config> di sn0 config> di lnc0 config> di ie0 config> di fe0 config> di cs0 config> q avail memory = 118005760 (115240K bytes) Preloaded elf kernel "kernel" at 0xc0447000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc044709c. Preloaded elf module "snd_via8233.ko" at 0xc04470ec. Preloaded elf module "snd_pcm.ko" at 0xc0447190. Preloaded elf module "snd_via82c686.ko" at 0xc0447230. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 6 entries at 0xc00fdd40 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI to PCI bridge (vendor=1106 device=8601)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Trident model 8500 VGA-compatible display device> at 0.0 irq 10 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4 pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 11 at device 7.5 on pci0 pcm0: <Avance Logic ALC200/200P ac97 codec> ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xe800-0xe81f irq 11 at device 10.0 on pci0 ed0: address 00:00:21:2d:ad:f7, type NE2000 (16 bit) orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled ad0: 38166MB <ST340810A> [77545/16/63] at ata0-master UDMA100 acd0: CDROM <LTN526> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s2a ad0s2g: hard error reading fsbn 98971886 of 21364912-21365023 (ad0s2 bn 98971886; cn 6160 tn 182 sn 20) trying PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0: DMA problem fallback to PIO mode ad0s2g: hard error reading fsbn 98971950 of 21364912-21365023 (ad0s2 bn 98971950; cn 6160 tn 183 sn 21) status=59 error=40 WARNING: /home was not properly dismounted dmesg ended here here is /etc/fstab, editted one # Device Mountpoint FStype Options Dump Pass# /dev/ad0s2b none swap sw 0 0 /dev/ad0s2a / ufs rw 1 1 #/dev/ad0s2g /home ufs rw 2 2 /dev/ad0s2g /home ufs ro 2 2 /dev/ad0s2f /usr ufs rw 2 2 /dev/ad0s2e /var ufs rw 2 2 /dev/acd0c /cdrom cd9660 ro,noauto 0 0 /dev/ad0s1 /win msdos rw 0 0 proc /proc procfs rw 0 0 --0-663912449-1056853029=:16358--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030629021709.16663.qmail>