Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 18 Mar 2005 19:46:34 +0100
From:      Dejan Lesjak <dejan.lesjak@ijs.si>
To:        freebsd-x11@freebsd.org
Cc:        Palle Girgensohn <girgen@pingpong.net>
Subject:   Re: no DVI output after upgrading to xorg 6.8.2
Message-ID:  <200503181946.35384.dejan.lesjak@ijs.si>
In-Reply-To: <44E0227E134FF92A7FAB68D2@fikon.pingpong.net>
References:  <44E0227E134FF92A7FAB68D2@fikon.pingpong.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 18 of March 2005 18:27, Palle Girgensohn wrote:
> Hi!
>
> After upgrading xorg to 6.8.2, my Radeon 9600 SE refuses to send any output
> on the DVI connector. Not even in BIOS during boot. VGA works fine. Before
> upgrading it worked just fine.
>
> Here's what Xorg.0.log says about it:
>
> (II) RADEON(0): Primary:
>  Monitor   -- CRT
>  Connector -- VGA
>  DAC Type  -- Primary
>  TMDS Type -- NONE
>  DDC Type  -- VGA_DDC
> (II) RADEON(0): Secondary:
>  Monitor   -- NONE
>  Connector -- DVI-I
>  DAC Type  -- TVDAC/ExtDAC
>  TMDS Type -- Internal
>  DDC Type  -- DVI_DDC
> (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000;
> xclk=19900
> (WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode
> disabled
>
>
> I've shut down the system and tried all sorts of things. I went back to
> 6.8.1, but that didn't help (why should it, even in BIOS I don't get a
> signal). Is the card broken, or is it some "burnt in" config that happened?
> In the latter case, how can I fix it?
>
> I've enclosed the xorg log and config.

Unfortunately it seems that this list doesn't like attachments, could you put 
them somewhere and point to them.
I would suspect (given that downgrading to 6.8.1 doesn't help and furthermore 
even video before you get to X not working) hardware failure, but I might be 
wrong. You might want to ask at xorg@lists.freedesktop.org as even if this is 
a problem with X.Org server, it most probably would not be FreeBSD specific 
and there is a better chance you might find someone that has the same 
hardware there.


Dejan



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200503181946.35384.dejan.lesjak>