Date: Sun, 18 Mar 2012 20:43:47 +0400 (MSK) From: Dmitry Morozovsky <marck@rinet.ru> To: =?ISO-8859-15?Q?G=F3t_Andr=E1s?= <andrej@antiszoc.hu> Cc: freebsd-stable@freebsd.org Subject: Re: ahci hangs on Supermicro MicroCloud second channel Message-ID: <alpine.BSF.2.00.1203182035440.65171@woozle.rinet.ru> In-Reply-To: <36b69f49aeb9bec1fc4b7e486023e494@antiszoc.hu> References: <alpine.BSF.2.00.1203181934540.65171@woozle.rinet.ru> <36b69f49aeb9bec1fc4b7e486023e494@antiszoc.hu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 18 Mar 2012, G?t Andr?s wrote: > Hi, > > Did you check whether there's newer firmware for the microcloud mainboards? > Does the integrated ctrls are in AHCI mode in the BIOS? Yes and yes, surely. > You may also ask Supermicro if it turns out that it's not a FreeBSD problem, > but be prepared that they'll ask for enterprise drives first. I can check with WD REs (have some spares for more disk-oriented servers, also SuperMicro), but let it be the latter phase. What puzzles me a bit is that it is not the first 1155 SuperMicro platform we use on 5017C-MTF it seems the same controller: ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xfb121000-0xfb1217ff irq 19 at device 31.2 on pci0 ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfb121000 ahci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 266 to local APIC 0 vector 59 ahci0: using IRQ 266 for MSI ahci0: [MPSAFE] ahci0: [ITHREAD] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported and ahci with the same pair of WD Blues works flawlessly > > Regards, > Andras > > > On Sun, 18 Mar 2012 20:10:34 +0400 (MSK), Dmitry Morozovsky wrote: > > Dear colleagues, > > > > I've start testing SuperMicro MicroCloud[1] to have high-density routers > > cluster, and experiencing strange effects with disk subsystem: > > > > - on stable/8, it does detect AHCI controller, but detects disks as non-ahci > > ad* > > - on stable/9, disks are shown as ada*, but disk on second channel > > has constant > > read/write hangs, showing 100% load on few hundreds kBps in gstat. > > > > disk controller is Intel C204 PCH: > > > > ahci0: <Intel Cougar Point AHCI SATA controller> port > > 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem > > 0xfa901000-0xfa9017ff irq 19 at device 31.2 on pci0 > > ahci0: attempting to allocate 1 MSI vectors (1 supported) > > msi: routing MSI IRQ 284 to local APIC 0 vector 81 > > ahci0: using IRQ 284 for MSI > > ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported > > ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM 6ports > > ahci0: Caps2: APST > > ahci0: EM Caps: ALHD XMT SMB LED > > ahcich0: <AHCI channel> at channel 0 on ahci0 > > ahcich0: Caps: > > ahcich1: <AHCI channel> at channel 1 on ahci0 > > ahcich1: Caps: > > > > pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 > > pass0: <WDC WD5000AAKX-001CA0 15.01H15> ATA-8 SATA 3.x device > > pass0: Serial Number WD-WCAYUFH26175 > > pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > > pass0: Command Queueing enabled > > pass1 at ahcich1 bus 0 scbus1 target 0 lun 0 > > pass1: <WDC WD5000AAKX-001CA0 15.01H15> ATA-8 SATA 3.x device > > pass1: Serial Number WD-WCAYUFH32290 > > pass1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > > pass1: Command Queueing enabled > > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > > ada0: <WDC WD5000AAKX-001CA0 15.01H15> ATA-8 SATA 3.x device > > ada0: Serial Number WD-WCAYUFH26175 > > ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > > ada0: Command Queueing enabled > > ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) > > ada0: Previously was known as ad4 > > ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 > > GEOM: new disk ada0 > > GEOM: new disk ada1 > > ada1: <WDC WD5000AAKX-001CA0 15.01H15> ATA-8 SATA 3.x device > > ada1: Serial Number WD-WCAYUFH32290 > > ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > > ada1: Command Queueing enabled > > ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) > > ada1: Previously was known as ad6 > > > > Any hints? > > > > > > [1] http://www.supermicro.nl/products/system/3U/5037/SYS-5037MC-H8TRF.cfm > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" > -- Sincerely, D.Marck [DM5020, MCK-RIPE, DM3-RIPN] [ FreeBSD committer: marck@FreeBSD.org ] ------------------------------------------------------------------------ *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck@rinet.ru *** ------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1203182035440.65171>