Date: Thu, 19 Oct 1995 16:09:38 +0200 (SAT) From: John Hay <jhay@mikom.csir.co.za> To: phk@critter.tfs.com (Poul-Henning Kamp) Cc: bde@zeta.org.au, freebsd-current@FreeBSD.org Subject: Re: clock running faster? Message-ID: <199510191409.QAA28496@zibbi.mikom.csir.co.za> In-Reply-To: <1979.814110755@critter.tfs.com> from "Poul-Henning Kamp" at Oct 19, 95 02:52:35 pm
next in thread | previous in thread | raw e-mail | index | archive | help
>
> > Those measurements made on kernel startup does not seem stable. Here is a
> > grep in my /var/log/messages file.
> >
> > Oct 18 18:39:57 angel /kernel: CPU: 86-MHz Pentium 735\90 or 815\100
> > (Pentium-class CPU)
> > Oct 18 18:42:11 angel /kernel: CPU: 87-MHz Pentium 735\90 or 815\100
> > (Pentium-class CPU)
> > Oct 19 11:53:40 angel /kernel: CPU: 83-MHz Pentium 735\90 or 815\100
> > (Pentium-class CPU)
> > Oct 19 11:57:18 angel /kernel: CPU: 85-MHz Pentium 735\90 or 815\100
> > (Pentium-class CPU)
> > Oct 19 11:59:33 angel /kernel: CPU: 89-MHz Pentium 735\90 or 815\100
> > (Pentium-class CPU)
>
> I've seen this too.
> Do you have any APM or other Power-mgt stuff enabled in the bios ?
>
No, this is a dual pentium PCI/EISA motherboard. Its number is GA-586ID. It
doesn't have any power management stuff.
Just incase it help, I will attach the output from dmesg.
John
--
John Hay -- John.Hay@csir.co.za
FreeBSD 2.2-CURRENT #0: Thu Oct 19 11:53:53 SAT 1995
jhay@angel.cids.org.za:/usr/src/sys/compile/ANGEL
CPU: 89-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x3bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory = 33554432 (32768K bytes)
avail memory = 31498240 (30760K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:70:bf:94, type SMC8416C/SMC8416BT (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16450
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16450
sio2 not found at 0x3e8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
gus0 at 0x220 irq 15 drq 1 flags 0x3 on isa
gus0: <Gravis UltraSound MAX (512k)>
gus0: <GUS MAX (CS4231)>
Probing for devices on the PCI bus:
chip0 <Intel 82434NX (Neptune) PCI cache memory controller> rev 17 on pci0:0
chip1 <Intel 82375EB PCI-EISA bridge> rev 4 on pci0:2
vga0 <VGA-compatible display device> rev 0 int a irq 11 on pci0:3
ncr0 <ncr 53c810 scsi> rev 1 int a irq 12 on pci0:4
(ncr0:0:0): "CONNER CFP1060S 1.05GB 203C" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1013MB (2074880 512 byte sectors)
(ncr0:4:0): "TANDBERG TDC 3800 =04:" type 1 removable SCSI 2
st0(ncr0:4:0): Sequential-Access
st0(ncr0:4:0): asynchronous.
st0(ncr0:4:0): asynchronous.
density code 0x0, drive empty
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199510191409.QAA28496>