From owner-freebsd-hackers@FreeBSD.ORG Thu Apr 18 17:52:41 2013 Return-Path: Delivered-To: freebsd-hackers@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 08BA866D for ; Thu, 18 Apr 2013 17:52:41 +0000 (UTC) (envelope-from nbari@inbox.im) Received: from ca2.route.mx (ca2.route.mx [72.55.175.69]) by mx1.freebsd.org (Postfix) with ESMTP id 949FA10A1 for ; Thu, 18 Apr 2013 17:52:40 +0000 (UTC) Received: (route-mx 93846 invoked from network); 18 Apr 2013 17:52:32 -0000 Received: from 89-181-202-22.net.novis.pt (HELO [192.168.1.100]) (nbari@inbox.im@route.mx) (envelope-sender ) by ca2.route.mx (route-mx) with AES128-SHA encrypted SMTP for ; 18 Apr 2013 17:52:32 -0000 Content-Type: text/plain; charset=windows-1252 Mime-Version: 1.0 (Mac OS X Mail 6.3 \(1503\)) Subject: [SOLVED] home lab [AMD A10 5800K , AsRock FM2A85X-ITX] panics too much From: Nicolas de Bari Embriz Garcia Rojas In-Reply-To: <122807B5-16CD-4F55-AB90-FB2ED433C425@inbox.im> Date: Thu, 18 Apr 2013 18:52:28 +0100 Content-Transfer-Encoding: quoted-printable Message-Id: References: <122807B5-16CD-4F55-AB90-FB2ED433C425@inbox.im> To: freebsd-hackers@freebsd.org X-Mailer: Apple Mail (2.1503) X-BeenThere: freebsd-hackers@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Technical Discussions relating to FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 18 Apr 2013 17:52:41 -0000 Hi, the solution was to properly set the voltages of the memory on the = BIOS. memory on BIOS was configured to only use 1.25. and the specs of the = memory say it required 1.5, setting the proper values on the BIOS did = the trick. regards. On Apr 8, 2013, at 4:22 AM, Nicolas de Bari Embriz Garcia Rojas = wrote: > Hi, all, I am having many kernel panic with an AMD A10 5800K cpu and a = AsRock FM2A85X-ITX motherboard.=20 >=20 > I successfully installed FreeBSD 9.1 amd64 with zfs raidz on root, = but when installing subversion from ports (make install clean), here my = first kernel painc occurred. After the machine was online again I = finished (make install clean) and well this time worked.=20 >=20 > I update the sources svn =85. and tried a make -j4 buildworld, it = started to build but later the machine just freeze.=20 >=20 > I later tried without the -j4 and was available to compile the world. >=20 > when compiling the kernel (make kernel) I got another kernel panic and = machine rebooted. >=20 > This time before booting, I tried to fix the bios setting the the OC = (overclook) features on the motherboard to match the hardware avoiding = fancy things, and well some times now I get panics others not. >=20 > I enable dumpdev=3D"AUTO" in rc.conf, but problem is that I have all = swap on the 'zfs' and I am not getting the dumps. >=20 > So wondering if some one could give me an advice of how could I fine = tune my system so that I can use this hardware. >=20 > the logs unfortunately don't show nothing I have enable *.* = /var/log/all.log on syslog.conf but don't show anything related to the = panics. >=20 > Any ideas ? >=20 > below I let the output of dmesg.boot and pciconf >=20 > 1 Copyright (c) 1992-2013 The FreeBSD Project. = = =20 > 2 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 = =20 > 3 The Regents of the University of California. All rights reserved. = = =20 > 4 FreeBSD is a registered trademark of The FreeBSD Foundation. = = =20 > 5 FreeBSD 9.1-STABLE #2 r249231: Sun Apr 7 13:36:17 UTC 2013 = = =20 > 6 root@amdtest:/usr/obj/usr/src/sys/amdtest amd64 = = =20 > 7 FreeBSD clang version 3.2 (tags/RELEASE_32/final 170710) 20121221 = = =20 > 8 CPU: AMD A10-5800K APU with Radeon(tm) HD Graphics (4192.46-MHz = K8-class CPU) = =20 > 9 Origin =3D "AuthenticAMD" Id =3D 0x610f01 Family =3D 0x15 = Model =3D 0x10 Stepping =3D 1 = =20 > 10 = Features=3D0x178bfbff = =20 > 11 = Features2=3D0x3e98320b = =20 > 12 AMD Features=3D0x2e500800 = = =20 > 13 AMD = Features2=3D0x1ebbfff,NodeId,TBM,Topology,,> = =20 > 14 Standard Extended Features=3D0x8 = = =20 > 15 TSC: P-state invariant, performance statistics = = =20 > 16 real memory =3D 17179869184 (16384 MB) = = =20 > 17 avail memory =3D 16455127040 (15692 MB) = = =20 > 18 Event timer "LAPIC" quality 400 = = =20 > 19 ACPI APIC Table: = = =20 > 20 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs = = =20 > 21 FreeBSD/SMP: 1 package(s) x 4 core(s) = = =20 > 22 cpu0 (BSP): APIC ID: 16 = = =20 > 23 cpu1 (AP): APIC ID: 17 = = =20 > 24 cpu2 (AP): APIC ID: 18 = = =20 > 25 cpu3 (AP): APIC ID: 19 = = =20 > 26 WARNING: VIMAGE (virtualized network stack) is a highly = experimental feature. = =20 > 27 ACPI Warning: Optional field Pm2ControlBlock has zero address or = length: 0x0000000000000000/0x1 (20110527/tbfadt-583) = =20 > 28 ioapic0 irqs 0-23 on motherboard = = =20 > 29 kbd1 at kbdmux0 = = =20 > 30 aesni0: on motherboard = = =20 > 31 cryptosoft0: on motherboard = = =20 > 32 acpi0: on motherboard = = =20 > 33 acpi0: Power Button (fixed) = = =20 > 34 cpu0: on acpi0 = = =20 > 35 cpu1: on acpi0 = = =20 > 36 cpu2: on acpi0 = = =20 > 37 cpu3: on acpi0 = = =20 > 38 attimer0: port 0x40-0x43 irq 0 on acpi0 = = =20 > 39 Timecounter "i8254" frequency 1193182 Hz quality 0 = = =20 > 40 Event timer "i8254" frequency 1193182 Hz quality 100 = = =20 > 41 atrtc0: port 0x70-0x71 irq 8 on acpi0 = = =20 > 42 Event timer "RTC" frequency 32768 Hz quality 0 = = =20 > 43 hpet0: iomem 0xfed00000-0xfed003ff on = acpi0 = =20 > 44 Timecounter "HPET" frequency 14318180 Hz quality 950 = = =20 > 45 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 = = =20 > 46 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on = acpi0 = =20 > 47 pcib0: port 0xcf8-0xcff on acpi0 = = =20 > 48 pci0: on pcib0 = = =20 > 49 pci0: at device 0.2 (no driver attached) = = =20 > 50 vgapci0: port 0xf000-0xf0ff mem = 0xfc000000-0xfdffffff,0xff700000-0xff73ffff irq 17 at device 1.0 on pci0 = =20 > 51 pci0: at device 1.1 (no driver attached) = = =20 > 52 pcib1: irq 18 at device 2.0 on pci0 = = =20 > 53 pci1: on pcib1 = = =20 > 54 em0: port = 0xe000-0xe01f mem = 0xff6c0000-0xff6dffff,0xff600000-0xff67ffff,0xff6e0000-0xff6e3fff irq 18 = at device 0.0 on pci1 =20 > 55 em0: Using MSIX interrupts with 3 vectors =20 > 56 em0: Ethernet address: 68:05:ca:11:d3:2c = = =20 > 57 xhci0: mem = 0xff74a000-0xff74bfff irq 18 at device 16.0 on pci0 = =20 > 58 xhci0: 32 byte context size. = = =20 > 59 usbus0 on xhci0 = = =20 > 60 xhci1: mem = 0xff748000-0xff749fff irq 17 at device 16.1 on pci0 = =20 > 61 xhci1: 32 byte context size. = = =20 > 62 usbus1 on xhci1 = = =20 > 63 ahci0: port = 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f = mem 0xff751000-0xff7517ff irq 19 at device 17.0 on pci0 =20 > 64 ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier supported = = =20 > 65 ahcich0: at channel 0 on ahci0 = = =20 > 66 ahcich1: at channel 1 on ahci0 = = =20 > 67 ahcich2: at channel 2 on ahci0 = = =20 > 68 ahcich3: at channel 3 on ahci0 = = =20 > 69 ahcich4: at channel 4 on ahci0 = = =20 > 70 ohci0: mem 0xff750000-0xff750fff = irq 18 at device 18.0 on pci0 = =20 > 71 usbus2 on ohci0 = = =20 > 72 ehci0: mem = 0xff74f000-0xff74f0ff irq 17 at device 18.2 on pci0 = =20 > 73 usbus3: EHCI version 1.0 = = =20 > 74 usbus3 on ehci0 = = =20 > 75 ohci1: mem 0xff74e000-0xff74efff = irq 18 at device 19.0 on pci0 = =20 > 76 usbus4 on ohci1 = = =20 > 77 ehci1: mem = 0xff74d000-0xff74d0ff irq 17 at device 19.2 on pci0 = =20 > 78 usbus5: EHCI version 1.0 = = =20 > 79 usbus5 on ehci1 = = =20 > 80 pci0: at device 20.0 (no driver attached) = = =20 > 81 pci0: at device 20.2 (no driver attached) = = =20 > 82 isab0: at device 20.3 on pci0 = = =20 > 83 isa0: on isab0 = = =20 > 84 pcib2: at device 20.4 on pci0 = = =20 > 85 pci2: on pcib2 = = =20 > 86 ohci2: mem 0xff74c000-0xff74cfff = irq 18 at device 20.5 on pci0 = =20 > 87 usbus6 on ohci2 = = =20 > 88 pcib3: at device 21.0 on pci0 = = =20 > 89 pci3: on pcib3 = = =20 > 90 re0: port = 0xd000-0xd0ff mem 0xfe004000-0xfe004fff,0xfe000000-0xfe003fff irq 16 at = device 0.0 on pci3 =20 > 91 re0: Using 1 MSI-X message = = =20 > 92 re0: Chip rev. 0x2c800000 = = =20 > 93 re0: MAC rev. 0x00000000 = = =20 > 94 miibus0: on re0 = = =20 > 95 rgephy0: PHY 1 on = miibus0 = =20 > 96 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, = 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, = 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-fl ow, = 1000baseT-FDX-flow-master, auto, auto-flow = = =20 > 97 re0: Ethernet address: bc:5f:f4:a3:25:65 = = =20 > 98 acpi_button0: on acpi0 = = =20 > 99 orm0: at iomem 0xcf800-0xd07ff on isa0 = = =20 > 100 sc0: at flags 0x100 on isa0 = = =20 > 101 sc0: VGA <16 virtual consoles, flags=3D0x300> = = =20 > 102 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff = on isa0 = =20 > 103 atkbdc0: at port 0x60,0x64 on isa0 = = =20 > 104 atkbd0: irq 1 on atkbdc0 =20 > 105 kbd0 at atkbd0 = = =20 > 106 atkbd0: [GIANT-LOCKED] = = =20 > 107 ctl: CAM Target Layer loaded = = =20 > 108 acpi_throttle0: on cpu0 = = =20 > 109 hwpstate0: on cpu0 = = =20 > 110 acpi_throttle1: on cpu1 = = =20 > 111 acpi_throttle1: failed to attach P_CNT = = =20 > 112 device_attach: acpi_throttle1 attach returned 6 = = =20 > 113 acpi_throttle2: on cpu2 = = =20 > 114 acpi_throttle2: failed to attach P_CNT = = =20 > 115 device_attach: acpi_throttle2 attach returned 6 = = =20 > 116 acpi_throttle3: on cpu3 = = =20 > 117 acpi_throttle3: failed to attach P_CNT = = =20 > 118 device_attach: acpi_throttle3 attach returned 6 = = =20 > 119 ZFS filesystem version: 5 = = =20 > 120 ZFS storage pool version: features support (5000) = = =20 > 121 Timecounters tick every 1.000 msec = = =20 > 122 vboxdrv: fAsync=3D0 offMin=3D0x44e offMax=3D0x74f = = =20 > 123 IPsec: Initialized Security Association Processing. = = =20 > 124 ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default = to accept, logging disabled = =20 > 125 usbus0: 5.0Gbps Super Speed USB v3.0 = = =20 > 126 usbus1: 5.0Gbps Super Speed USB v3.0 = = =20 > 127 usbus2: 12Mbps Full Speed USB v1.0 = = =20 > 128 usbus3: 480Mbps High Speed USB v2.0 = = =20 > 129 usbus4: 12Mbps Full Speed USB v1.0 = = =20 > 130 usbus5: 480Mbps High Speed USB v2.0 = = =20 > 131 usbus6: 12Mbps Full Speed USB v1.0 = = =20 > 132 ugen0.1: <0x1022> at usbus0 = = =20 > 133 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on = usbus0 = =20 > 134 ugen1.1: <0x1022> at usbus1 = = =20 > 135 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on = usbus1 = =20 > 136 ugen2.1: at usbus2 = = =20 > 137 uhub2: on = usbus2 = =20 > 138 ugen3.1: at usbus3 = = =20 > 139 uhub3: on = usbus3 = =20 > 140 ugen4.1: at usbus4 = = =20 > 141 uhub4: on = usbus4 = =20 > 142 ugen5.1: at usbus5 = = =20 > 143 uhub5: on = usbus5 = =20 > 144 ugen6.1: at usbus6 = = =20 > 145 uhub6: on = usbus6 = =20 > 146 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 = = =20 > 147 ada0: ATA-8 SATA 3.x device = = =20 > 148 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) = = =20 > 149 ada0: Command Queueing enabled = = =20 > 150 ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) = = =20 > 151 ada0: Previously was known as ad4 = = =20 > 152 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 = = =20 > 153 ada1: ATA-8 SATA 3.x device = = =20 > 154 ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) = = =20 > 155 ada1: Command Queueing enabled = = =20 > 156 ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) = = =20 > 157 ada1: Previously was known as ad6 = = =20 > 158 ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 = = =20 > 159 ada2: ATA-8 SATA 3.x device = = =20 > 160 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) = = =20 > 161 ada2: Command Queueing enabled = = =20 > 162 ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) = = =20 > 163 ada2: Previously was known as ad8 = = =20 > 164 ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 = = =20 > 165 ada3: ATA-9 SATA 3.x device = = =20 > 166 ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) = = =20 > 167 ada3: Command Queueing enabled = = =20 > 168 ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) = = =20 > 169 ada3: Previously was known as ad10 = = =20 > 170 SMP: AP CPU #2 Launched! = = =20 > 171 SMP: AP CPU #1 Launched! = = =20 > 172 SMP: AP CPU #3 Launched! = = =20 > 173 Timecounter "TSC-low" frequency 2096231117 Hz quality 1000 = = =20 > 174 uhub6: 2 ports with 2 removable, self powered = = =20 > 175 uhub4: 5 ports with 5 removable, self powered = = =20 > 176 uhub2: 5 ports with 5 removable, self powered = = =20 > 177 uhub1: 4 ports with 4 removable, self powered = = =20 > 178 uhub0: 4 ports with 4 removable, self powered = = =20 > 179 Root mount waiting for: usbus5 usbus3 = = =20 > 180 uhub3: 5 ports with 5 removable, self powered = = =20 > 181 uhub5: 5 ports with 5 removable, self powered = = =20 > 182 Trying to mount root from zfs:zroot []... = = =20 > 183 bridge0: Ethernet address: 02:fe:4a:c8:9c:00 = = =20 > 184 bridge1: Ethernet address: 02:fe:4a:c8:9c:01 = = =20 > 185 epair0a: Ethernet address: 02:00:a0:00:0f:0a = = =20 > 186 epair0b: Ethernet address: 02:00:a0:00:10:0b = = =20 > 187 epair1a: Ethernet address: 02:00:a0:00:11:0a = = =20 > 188 epair1b: Ethernet address: 02:00:a0:00:12:0b = = =20 > 189 tap0: Ethernet address: 00:bd:14:26:00:00 = = =20 > 190 re0: link state changed to UP =20 >=20 > the output of pciconf -l is: > hostb0@pci0:0:0:0: class=3D0x060000 card=3D0x14101849 = chip=3D0x14101022 rev=3D0x00 hdr=3D0x00 > none0@pci0:0:0:2: class=3D0x080600 card=3D0x14191022 = chip=3D0x14191022 rev=3D0x00 hdr=3D0x00 > vgapci0@pci0:0:1:0: class=3D0x030000 card=3D0x99011849 = chip=3D0x99011002 rev=3D0x00 hdr=3D0x00 > none1@pci0:0:1:1: class=3D0x040300 card=3D0x99021849 = chip=3D0x99021002 rev=3D0x00 hdr=3D0x00 > pcib1@pci0:0:2:0: class=3D0x060400 card=3D0x12341022 = chip=3D0x14121022 rev=3D0x00 hdr=3D0x01 > xhci0@pci0:0:16:0: class=3D0x0c0330 card=3D0x78121022 = chip=3D0x78121022 rev=3D0x03 hdr=3D0x00 > xhci1@pci0:0:16:1: class=3D0x0c0330 card=3D0x78121022 = chip=3D0x78121022 rev=3D0x03 hdr=3D0x00 > ahci0@pci0:0:17:0: class=3D0x010601 card=3D0x78011849 = chip=3D0x78011022 rev=3D0x40 hdr=3D0x00 > ohci0@pci0:0:18:0: class=3D0x0c0310 card=3D0x78071849 = chip=3D0x78071022 rev=3D0x11 hdr=3D0x00 > ehci0@pci0:0:18:2: class=3D0x0c0320 card=3D0x78081849 = chip=3D0x78081022 rev=3D0x11 hdr=3D0x00 > ohci1@pci0:0:19:0: class=3D0x0c0310 card=3D0x78071849 = chip=3D0x78071022 rev=3D0x11 hdr=3D0x00 > ehci1@pci0:0:19:2: class=3D0x0c0320 card=3D0x78081849 = chip=3D0x78081022 rev=3D0x11 hdr=3D0x00 > none2@pci0:0:20:0: class=3D0x0c0500 card=3D0x780b1849 = chip=3D0x780b1022 rev=3D0x14 hdr=3D0x00 > none3@pci0:0:20:2: class=3D0x040300 card=3D0x88921849 = chip=3D0x780d1022 rev=3D0x01 hdr=3D0x00 > isab0@pci0:0:20:3: class=3D0x060100 card=3D0x780e1849 = chip=3D0x780e1022 rev=3D0x11 hdr=3D0x00 > pcib2@pci0:0:20:4: class=3D0x060401 card=3D0x00000000 = chip=3D0x780f1022 rev=3D0x40 hdr=3D0x01 > ohci2@pci0:0:20:5: class=3D0x0c0310 card=3D0x78091849 = chip=3D0x78091022 rev=3D0x11 hdr=3D0x00 > pcib3@pci0:0:21:0: class=3D0x060400 card=3D0x00001022 = chip=3D0x43a01022 rev=3D0x00 hdr=3D0x01 > hostb1@pci0:0:24:0: class=3D0x060000 card=3D0x00000000 = chip=3D0x14001022 rev=3D0x00 hdr=3D0x00 > hostb2@pci0:0:24:1: class=3D0x060000 card=3D0x00000000 = chip=3D0x14011022 rev=3D0x00 hdr=3D0x00 > hostb3@pci0:0:24:2: class=3D0x060000 card=3D0x00000000 = chip=3D0x14021022 rev=3D0x00 hdr=3D0x00 > hostb4@pci0:0:24:3: class=3D0x060000 card=3D0x00000000 = chip=3D0x14031022 rev=3D0x00 hdr=3D0x00 > hostb5@pci0:0:24:4: class=3D0x060000 card=3D0x00000000 = chip=3D0x14041022 rev=3D0x00 hdr=3D0x00 > hostb6@pci0:0:24:5: class=3D0x060000 card=3D0x00000000 = chip=3D0x14051022 rev=3D0x00 hdr=3D0x00 > em0@pci0:1:0:0: class=3D0x020000 card=3D0xa01f8086 chip=3D0x10d38086 = rev=3D0x00 hdr=3D0x00 > re0@pci0:3:0:0: class=3D0x020000 card=3D0x81681849 chip=3D0x816810ec = rev=3D0x06 hdr=3D0x00 >=20 >=20 >=20