From owner-svn-src-head@FreeBSD.ORG Tue Nov 1 21:26:58 2011 Return-Path: Delivered-To: svn-src-head@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3CFE7106564A; Tue, 1 Nov 2011 21:26:58 +0000 (UTC) (envelope-from marius@FreeBSD.org) Received: from svn.freebsd.org (svn.freebsd.org [IPv6:2001:4f8:fff6::2c]) by mx1.freebsd.org (Postfix) with ESMTP id 29E2D8FC08; Tue, 1 Nov 2011 21:26:58 +0000 (UTC) Received: from svn.freebsd.org (localhost [127.0.0.1]) by svn.freebsd.org (8.14.4/8.14.4) with ESMTP id pA1LQw2E084296; Tue, 1 Nov 2011 21:26:58 GMT (envelope-from marius@svn.freebsd.org) Received: (from marius@localhost) by svn.freebsd.org (8.14.4/8.14.4/Submit) id pA1LQvhv084284; Tue, 1 Nov 2011 21:26:58 GMT (envelope-from marius@svn.freebsd.org) Message-Id: <201111012126.pA1LQvhv084284@svn.freebsd.org> From: Marius Strobl Date: Tue, 1 Nov 2011 21:26:57 +0000 (UTC) To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org X-SVN-Group: head MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: Subject: svn commit: r227006 - in head: . sys/amd64/conf sys/conf sys/dev/esp sys/i386/conf sys/modules sys/modules/esp sys/pc98/conf sys/sparc64/conf X-BeenThere: svn-src-head@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SVN commit messages for the src tree for head/-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 01 Nov 2011 21:26:58 -0000 Author: marius Date: Tue Nov 1 21:26:57 2011 New Revision: 227006 URL: http://svn.freebsd.org/changeset/base/227006 Log: Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Obtained from: NetBSD (based on) MFC after: 3 days Added: head/sys/dev/esp/am53c974reg.h (contents, props changed) head/sys/dev/esp/esp_pci.c (contents, props changed) Modified: head/UPDATING head/sys/amd64/conf/GENERIC head/sys/conf/NOTES head/sys/conf/files head/sys/i386/conf/GENERIC head/sys/modules/Makefile head/sys/modules/esp/Makefile head/sys/pc98/conf/GENERIC head/sys/sparc64/conf/GENERIC Modified: head/UPDATING ============================================================================== --- head/UPDATING Tue Nov 1 21:21:36 2011 (r227005) +++ head/UPDATING Tue Nov 1 21:26:57 2011 (r227006) @@ -22,6 +22,10 @@ NOTE TO PEOPLE WHO THINK THAT FreeBSD 10 machines to maximize performance. (To disable malloc debugging, run ln -s aj /etc/malloc.conf.) +20111101: + The broken amd(4) driver has been replaced with esp(4) in the amd64, + i386 and pc98 GENERIC kernel configuration files. + 20110930: sysinstall has been removed Modified: head/sys/amd64/conf/GENERIC ============================================================================== --- head/sys/amd64/conf/GENERIC Tue Nov 1 21:21:36 2011 (r227005) +++ head/sys/amd64/conf/GENERIC Tue Nov 1 21:26:57 2011 (r227006) @@ -107,7 +107,7 @@ options AHC_REG_PRETTY_PRINT # Print re device ahd # AHA39320/29320 and onboard AIC79xx devices options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. -device amd # AMD 53C974 (Tekram DC-390(T)) +device esp # AMD Am53C974 (Tekram DC-390(T)) device hptiop # Highpoint RocketRaid 3xxx series device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module Modified: head/sys/conf/NOTES ============================================================================== --- head/sys/conf/NOTES Tue Nov 1 21:21:36 2011 (r227005) +++ head/sys/conf/NOTES Tue Nov 1 21:26:57 2011 (r227006) @@ -1459,7 +1459,9 @@ options TEKEN_UTF8 # UTF-8 output hand # such as the Tekram DC-390(T). # bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x, # BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F -# esp: NCR53c9x. Only for SBUS hardware right now. +# esp: Emulex ESP, NCR 53C9x and QLogic FAS families based controllers +# including the AMD Am53C974 (found on devices such as the Tekram +# DC-390(T)) and the Sun ESP and FAS families of controllers # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters, # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2, # ISP 12160 Ultra3 SCSI, Modified: head/sys/conf/files ============================================================================== --- head/sys/conf/files Tue Nov 1 21:21:36 2011 (r227005) +++ head/sys/conf/files Tue Nov 1 21:26:57 2011 (r227006) @@ -1064,6 +1064,7 @@ dev/ep/if_ep_eisa.c optional ep eisa dev/ep/if_ep_isa.c optional ep isa dev/ep/if_ep_mca.c optional ep mca dev/ep/if_ep_pccard.c optional ep pccard +dev/esp/esp_pci.c optional esp pci dev/esp/ncr53c9x.c optional esp dev/ex/if_ex.c optional ex dev/ex/if_ex_isa.c optional ex isa Added: head/sys/dev/esp/am53c974reg.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/dev/esp/am53c974reg.h Tue Nov 1 21:26:57 2011 (r227006) @@ -0,0 +1,72 @@ +/* $NetBSD: pcscpreg.h,v 1.2 2008/04/28 20:23:55 martin Exp $ */ + +/*- + * Copyright (c) 1998 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Izumi Tsutsui. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +/* $FreeBSD$ */ + +#ifndef _AM53C974_H_ +#define _AM53C974_H_ + +/* + * Am53c974 DMA engine registers + */ + +#define DMA_CMD 0x40 /* Command */ +#define DMACMD_RSVD 0xFFFFFF28 /* reserved */ +#define DMACMD_DIR 0x00000080 /* Transfer Direction (read:1) */ +#define DMACMD_INTE 0x00000040 /* DMA Interrupt Enable */ +#define DMACMD_MDL 0x00000010 /* Map to Memory Description List */ +#define DMACMD_DIAG 0x00000004 /* Diagnostic */ +#define DMACMD_CMD 0x00000003 /* Command Code Bit */ +#define DMACMD_IDLE 0x00000000 /* Idle */ +#define DMACMD_BLAST 0x00000001 /* Blast */ +#define DMACMD_ABORT 0x00000002 /* Abort */ +#define DMACMD_START 0x00000003 /* Start */ + +#define DMA_STC 0x44 /* Start Transfer Count */ +#define DMA_SPA 0x48 /* Start Physical Address */ +#define DMA_WBC 0x4C /* Working Byte Counter */ +#define DMA_WAC 0x50 /* Working Address Counter */ + +#define DMA_STAT 0x54 /* Status Register */ +#define DMASTAT_RSVD 0xFFFFFF80 /* reserved */ +#define DMASTAT_PABT 0x00000040 /* PCI master/target Abort */ +#define DMASTAT_BCMP 0x00000020 /* BLAST Complete */ +#define DMASTAT_SINT 0x00000010 /* SCSI Interrupt */ +#define DMASTAT_DONE 0x00000008 /* DMA Transfer Terminated */ +#define DMASTAT_ABT 0x00000004 /* DMA Transfer Aborted */ +#define DMASTAT_ERR 0x00000002 /* DMA Transfer Error */ +#define DMASTAT_PWDN 0x00000001 /* Power Down Indicator */ + +#define DMA_SMDLA 0x58 /* Starting Memory Descpritor List Address */ +#define DMA_WMAC 0x5C /* Working MDL Counter */ +#define DMA_SBAC 0x70 /* SCSI Bus and Control */ + +#endif /* _AM53C974_H_ */ Added: head/sys/dev/esp/esp_pci.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/dev/esp/esp_pci.c Tue Nov 1 21:26:57 2011 (r227006) @@ -0,0 +1,654 @@ +/*- + * Copyright (c) 2011 Marius Strobl + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +/* $NetBSD: pcscp.c,v 1.45 2010/11/13 13:52:08 uebayasi Exp $ */ + +/*- + * Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, + * NASA Ames Research Center; Izumi Tsutsui. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * esp_pci.c: device dependent code for AMD Am53c974 (PCscsi-PCI) + * written by Izumi Tsutsui + * + * Technical manual available at + * http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/19113.pdf + */ + +#include +__FBSDID("$FreeBSD$"); + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include + +#include +#include + +#include + +#define PCI_DEVICE_ID_AMD53C974 0x20201022 + +struct esp_pci_softc { + struct ncr53c9x_softc sc_ncr53c9x; /* glue to MI code */ + struct device *sc_dev; + + struct resource *sc_res[2]; +#define ESP_PCI_RES_INTR 0 +#define ESP_PCI_RES_IO 1 + + bus_dma_tag_t sc_pdmat; + + bus_dma_tag_t sc_xferdmat; /* DMA tag for transfers */ + bus_dmamap_t sc_xferdmam; /* DMA map for transfers */ + + void *sc_ih; /* interrupt handler */ + + size_t sc_dmasize; /* DMA size */ + void **sc_dmaaddr; /* DMA address */ + size_t *sc_dmalen; /* DMA length */ + int sc_active; /* DMA state */ + int sc_datain; /* DMA Data Direction */ +}; + +static struct resource_spec esp_pci_res_spec[] = { + { SYS_RES_IRQ, 0, RF_SHAREABLE | RF_ACTIVE }, /* ESP_PCI_RES_INTR */ + { SYS_RES_IOPORT, PCIR_BAR(0), RF_ACTIVE }, /* ESP_PCI_RES_IO */ + { -1, 0 } +}; + +#define READ_DMAREG(sc, reg) \ + bus_read_4((sc)->sc_res[ESP_PCI_RES_IO], (reg)) +#define WRITE_DMAREG(sc, reg, var) \ + bus_write_4((sc)->sc_res[ESP_PCI_RES_IO], (reg), (var)) + +#define READ_ESPREG(sc, reg) \ + bus_read_1((sc)->sc_res[ESP_PCI_RES_IO], (reg) << 2) +#define WRITE_ESPREG(sc, reg, val) \ + bus_write_1((sc)->sc_res[ESP_PCI_RES_IO], (reg) << 2, (val)) + +static int esp_pci_probe(device_t); +static int esp_pci_attach(device_t); +static int esp_pci_detach(device_t); +static int esp_pci_suspend(device_t); +static int esp_pci_resume(device_t); + +static device_method_t esp_pci_methods[] = { + DEVMETHOD(device_probe, esp_pci_probe), + DEVMETHOD(device_attach, esp_pci_attach), + DEVMETHOD(device_detach, esp_pci_detach), + DEVMETHOD(device_suspend, esp_pci_suspend), + DEVMETHOD(device_resume, esp_pci_resume), + + KOBJMETHOD_END +}; + +static driver_t esp_pci_driver = { + "esp", + esp_pci_methods, + sizeof(struct esp_pci_softc) +}; + +DRIVER_MODULE(esp, pci, esp_pci_driver, esp_devclass, 0, 0); +MODULE_DEPEND(esp, pci, 1, 1, 1); + +/* + * Functions and the switch for the MI code + */ +static void esp_pci_dma_go(struct ncr53c9x_softc *); +static int esp_pci_dma_intr(struct ncr53c9x_softc *); +static int esp_pci_dma_isactive(struct ncr53c9x_softc *); + +static int esp_pci_dma_isintr(struct ncr53c9x_softc *); +static void esp_pci_dma_reset(struct ncr53c9x_softc *); +static int esp_pci_dma_setup(struct ncr53c9x_softc *, void **, size_t *, + int, size_t *); +static void esp_pci_dma_stop(struct ncr53c9x_softc *); +static void esp_pci_write_reg(struct ncr53c9x_softc *, int, uint8_t); +static uint8_t esp_pci_read_reg(struct ncr53c9x_softc *, int); +static void esp_pci_xfermap(void *arg, bus_dma_segment_t *segs, int nseg, + int error); + +static struct ncr53c9x_glue esp_pci_glue = { + esp_pci_read_reg, + esp_pci_write_reg, + esp_pci_dma_isintr, + esp_pci_dma_reset, + esp_pci_dma_intr, + esp_pci_dma_setup, + esp_pci_dma_go, + esp_pci_dma_stop, + esp_pci_dma_isactive, +}; + +static int +esp_pci_probe(device_t dev) +{ + + if (pci_get_devid(dev) == PCI_DEVICE_ID_AMD53C974) { + device_set_desc(dev, "AMD Am53C974 Fast-SCSI"); + return (BUS_PROBE_DEFAULT); + } + + return (ENXIO); +} + +/* + * Attach this instance, and then all the sub-devices + */ +static int +esp_pci_attach(device_t dev) +{ + struct esp_pci_softc *esc; + struct ncr53c9x_softc *sc; + int error; + + esc = device_get_softc(dev); + sc = &esc->sc_ncr53c9x; + + NCR_LOCK_INIT(sc); + + esc->sc_dev = dev; + sc->sc_glue = &esp_pci_glue; + + pci_enable_busmaster(dev); + + error = bus_alloc_resources(dev, esp_pci_res_spec, esc->sc_res); + if (error != 0) { + device_printf(dev, "failed to allocate resources\n"); + bus_release_resources(dev, esp_pci_res_spec, esc->sc_res); + return (error); + } + + error = bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0, + BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, + BUS_SPACE_MAXSIZE_32BIT, BUS_SPACE_UNRESTRICTED, + BUS_SPACE_MAXSIZE_32BIT, 0, NULL, NULL, &esc->sc_pdmat); + if (error != 0) { + device_printf(dev, "cannot create parent DMA tag\n"); + goto fail_res; + } + + /* + * XXX More of this should be in ncr53c9x_attach(), but + * XXX should we really poke around the chip that much in + * XXX the MI code? Think about this more... + */ + + /* + * Set up static configuration info. + * + * XXX we should read the configuration from the EEPROM. + */ + sc->sc_id = 7; + sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB; + sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_FE; + sc->sc_cfg3 = NCRAMDCFG3_IDM | NCRAMDCFG3_FCLK; + sc->sc_cfg4 = NCRAMDCFG4_GE12NS | NCRAMDCFG4_RADE; + sc->sc_rev = NCR_VARIANT_AM53C974; + sc->sc_features = NCR_F_FASTSCSI | NCR_F_DMASELECT; + sc->sc_cfg3_fscsi = NCRAMDCFG3_FSCSI; + sc->sc_freq = 40; /* MHz */ + + /* + * This is the value used to start sync negotiations + * Note that the NCR register "SYNCTP" is programmed + * in "clocks per byte", and has a minimum value of 4. + * The SCSI period used in negotiation is one-fourth + * of the time (in nanoseconds) needed to transfer one byte. + * Since the chip's clock is given in MHz, we have the following + * formula: 4 * period = (1000 / freq) * 4 + */ + sc->sc_minsync = 1000 / sc->sc_freq; + + sc->sc_maxxfer = DFLTPHYS; /* see below */ + sc->sc_maxoffset = 15; + sc->sc_extended_geom = 1; + +#define MDL_SEG_SIZE 0x1000 /* 4kbyte per segment */ + + /* + * Create the DMA tag and map for the data transfers. + * + * Note: given that bus_dma(9) only adheres to the requested alignment + * for the first segment (and that also only for bus_dmamem_alloc()ed + * DMA maps) we can't use the Memory Descriptor List. However, also + * when not using the MDL, the maximum transfer size apparently is + * limited to 4k so we have to split transfers up, which plain sucks. + */ + error = bus_dma_tag_create(esc->sc_pdmat, PAGE_SIZE, 0, + BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, + MDL_SEG_SIZE, 1, MDL_SEG_SIZE, BUS_DMA_ALLOCNOW, + busdma_lock_mutex, &sc->sc_lock, &esc->sc_xferdmat); + if (error != 0) { + device_printf(dev, "cannot create transfer DMA tag\n"); + goto fail_pdmat; + } + error = bus_dmamap_create(esc->sc_xferdmat, 0, &esc->sc_xferdmam); + if (error != 0) { + device_printf(dev, "cannnot create transfer DMA map\n"); + goto fail_xferdmat; + } + + error = bus_setup_intr(dev, esc->sc_res[ESP_PCI_RES_INTR], + INTR_MPSAFE | INTR_TYPE_CAM, NULL, ncr53c9x_intr, sc, + &esc->sc_ih); + if (error != 0) { + device_printf(dev, "cannot set up interrupt\n"); + goto fail_xferdmam; + } + + /* Do the common parts of attachment. */ + sc->sc_dev = esc->sc_dev; + error = ncr53c9x_attach(sc); + if (error != 0) { + device_printf(esc->sc_dev, "ncr53c9x_attach failed\n"); + goto fail_intr; + } + + return (0); + + fail_intr: + bus_teardown_intr(esc->sc_dev, esc->sc_res[ESP_PCI_RES_INTR], + esc->sc_ih); + fail_xferdmam: + bus_dmamap_destroy(esc->sc_xferdmat, esc->sc_xferdmam); + fail_xferdmat: + bus_dma_tag_destroy(esc->sc_xferdmat); + fail_pdmat: + bus_dma_tag_destroy(esc->sc_pdmat); + fail_res: + bus_release_resources(dev, esp_pci_res_spec, esc->sc_res); + NCR_LOCK_DESTROY(sc); + + return (error); +} + +static int +esp_pci_detach(device_t dev) +{ + struct ncr53c9x_softc *sc; + struct esp_pci_softc *esc; + int error; + + esc = device_get_softc(dev); + sc = &esc->sc_ncr53c9x; + + bus_teardown_intr(esc->sc_dev, esc->sc_res[ESP_PCI_RES_INTR], + esc->sc_ih); + error = ncr53c9x_detach(sc); + if (error != 0) + return (error); + bus_dmamap_destroy(esc->sc_xferdmat, esc->sc_xferdmam); + bus_dma_tag_destroy(esc->sc_xferdmat); + bus_dma_tag_destroy(esc->sc_pdmat); + bus_release_resources(dev, esp_pci_res_spec, esc->sc_res); + NCR_LOCK_DESTROY(sc); + + return (0); +} + +static int +esp_pci_suspend(device_t dev) +{ + + return (ENXIO); +} + +static int +esp_pci_resume(device_t dev) +{ + + return (ENXIO); +} + +static void +esp_pci_xfermap(void *arg, bus_dma_segment_t *segs, int nsegs, int error) +{ + struct esp_pci_softc *esc = (struct esp_pci_softc *)arg; + + if (error != 0) + return; + + KASSERT(nsegs == 1, ("%s: bad transfer segment count %d", __func__, + nsegs)); + KASSERT(segs[0].ds_len <= MDL_SEG_SIZE, + ("%s: bad transfer segment length %ld", __func__, + (long)segs[0].ds_len)); + + /* Program the DMA Starting Physical Address. */ + WRITE_DMAREG(esc, DMA_SPA, segs[0].ds_addr); +} + +/* + * Glue functions + */ + +static uint8_t +esp_pci_read_reg(struct ncr53c9x_softc *sc, int reg) +{ + struct esp_pci_softc *esc = (struct esp_pci_softc *)sc; + + return (READ_ESPREG(esc, reg)); +} + +static void +esp_pci_write_reg(struct ncr53c9x_softc *sc, int reg, uint8_t v) +{ + struct esp_pci_softc *esc = (struct esp_pci_softc *)sc; + + WRITE_ESPREG(esc, reg, v); +} + +static int +esp_pci_dma_isintr(struct ncr53c9x_softc *sc) +{ + struct esp_pci_softc *esc = (struct esp_pci_softc *)sc; + + return (READ_ESPREG(esc, NCR_STAT) & NCRSTAT_INT) != 0; +} + +static void +esp_pci_dma_reset(struct ncr53c9x_softc *sc) +{ + struct esp_pci_softc *esc = (struct esp_pci_softc *)sc; + + WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE); + + esc->sc_active = 0; +} + +static int +esp_pci_dma_intr(struct ncr53c9x_softc *sc) +{ + struct esp_pci_softc *esc = (struct esp_pci_softc *)sc; + bus_dma_tag_t xferdmat; + bus_dmamap_t xferdmam; + size_t dmasize; + int datain, i, resid, trans; + uint32_t dmastat; + char *p = NULL; + + xferdmat = esc->sc_xferdmat; + xferdmam = esc->sc_xferdmam; + datain = esc->sc_datain; + + dmastat = READ_DMAREG(esc, DMA_STAT); + + if ((dmastat & DMASTAT_ERR) != 0) { + /* XXX not tested... */ + WRITE_DMAREG(esc, DMA_CMD, DMACMD_ABORT | (datain != 0 ? + DMACMD_DIR : 0)); + + device_printf(esc->sc_dev, "DMA error detected; Aborting.\n"); + bus_dmamap_sync(xferdmat, xferdmam, datain != 0 ? + BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(xferdmat, xferdmam); + return (-1); + } + + if ((dmastat & DMASTAT_ABT) != 0) { + /* XXX what should be done? */ + device_printf(esc->sc_dev, "DMA aborted.\n"); + WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE | (datain != 0 ? + DMACMD_DIR : 0)); + esc->sc_active = 0; + return (0); + } + + KASSERT(esc->sc_active != 0, ("%s: DMA wasn't active", __func__)); + + /* DMA has stopped. */ + + esc->sc_active = 0; + + dmasize = esc->sc_dmasize; + if (dmasize == 0) { + /* A "Transfer Pad" operation completed. */ + NCR_DMA(("%s: discarded %d bytes (tcl=%d, tcm=%d)\n", + __func__, READ_ESPREG(esc, NCR_TCL) | + (READ_ESPREG(esc, NCR_TCM) << 8), + READ_ESPREG(esc, NCR_TCL), READ_ESPREG(esc, NCR_TCM))); + return (0); + } + + resid = 0; + /* + * If a transfer onto the SCSI bus gets interrupted by the device + * (e.g. for a SAVEPOINTER message), the data in the FIFO counts + * as residual since the ESP counter registers get decremented as + * bytes are clocked into the FIFO. + */ + if (datain == 0 && + (resid = (READ_ESPREG(esc, NCR_FFLAG) & NCRFIFO_FF)) != 0) + NCR_DMA(("%s: empty esp FIFO of %d ", __func__, resid)); + + if ((sc->sc_espstat & NCRSTAT_TC) == 0) { + /* + * "Terminal count" is off, so read the residue + * out of the ESP counter registers. + */ + if (datain != 0) { + resid = READ_ESPREG(esc, NCR_FFLAG) & NCRFIFO_FF; + while (resid > 1) + resid = + READ_ESPREG(esc, NCR_FFLAG) & NCRFIFO_FF; + WRITE_DMAREG(esc, DMA_CMD, DMACMD_BLAST | DMACMD_DIR); + + for (i = 0; i < 0x8000; i++) /* XXX 0x8000 ? */ + if ((READ_DMAREG(esc, DMA_STAT) & + DMASTAT_BCMP) != 0) + break; + + /* See the below comments... */ + if (resid != 0) + p = *esc->sc_dmaaddr; + } + + resid += READ_ESPREG(esc, NCR_TCL) | + (READ_ESPREG(esc, NCR_TCM) << 8) | + (READ_ESPREG(esc, NCR_TCH) << 16); + } else + while ((dmastat & DMASTAT_DONE) == 0) + dmastat = READ_DMAREG(esc, DMA_STAT); + + WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE | (datain != 0 ? + DMACMD_DIR : 0)); + + /* Sync the transfer buffer. */ + bus_dmamap_sync(xferdmat, xferdmam, datain != 0 ? + BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(xferdmat, xferdmam); + + trans = dmasize - resid; + + /* + * From the technical manual notes: + * + * "In some odd byte conditions, one residual byte will be left + * in the SCSI FIFO, and the FIFO flags will never count to 0. + * When this happens, the residual byte should be retrieved + * via PIO following completion of the BLAST operation." + */ + if (p != NULL) { + p += trans; + *p = READ_ESPREG(esc, NCR_FIFO); + trans++; + } + + if (trans < 0) { /* transferred < 0 ? */ +#if 0 + /* + * This situation can happen in perfectly normal operation + * if the ESP is reselected while using DMA to select + * another target. As such, don't print the warning. + */ + device_printf(dev, "xfer (%d) > req (%d)\n", trans, dmasize); +#endif + trans = dmasize; + } + + NCR_DMA(("%s: tcl=%d, tcm=%d, tch=%d; trans=%d, resid=%d\n", __func__, + READ_ESPREG(esc, NCR_TCL), READ_ESPREG(esc, NCR_TCM), + READ_ESPREG(esc, NCR_TCH), trans, resid)); + + *esc->sc_dmalen -= trans; + *esc->sc_dmaaddr = (char *)*esc->sc_dmaaddr + trans; + + return (0); +} + +static int +esp_pci_dma_setup(struct ncr53c9x_softc *sc, void **addr, size_t *len, + int datain, size_t *dmasize) +{ + struct esp_pci_softc *esc = (struct esp_pci_softc *)sc; + int error; + + WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE | (datain != 0 ? DMACMD_DIR : + 0)); + + *dmasize = esc->sc_dmasize = ulmin(*dmasize, MDL_SEG_SIZE); + esc->sc_dmaaddr = addr; + esc->sc_dmalen = len; + esc->sc_datain = datain; + + /* + * There's no need to set up DMA for a "Transfer Pad" operation. + */ + if (*dmasize == 0) + return (0); + + /* Set the transfer length. */ + WRITE_DMAREG(esc, DMA_STC, *dmasize); + + /* + * Load the transfer buffer and program the DMA address. + * Note that the NCR53C9x core can't handle EINPROGRESS so we set + * BUS_DMA_NOWAIT. + */ + error = bus_dmamap_load(esc->sc_xferdmat, esc->sc_xferdmam, + *esc->sc_dmaaddr, *dmasize, esp_pci_xfermap, sc, BUS_DMA_NOWAIT); + + return (error); +} + +static void +esp_pci_dma_go(struct ncr53c9x_softc *sc) +{ + struct esp_pci_softc *esc = (struct esp_pci_softc *)sc; + int datain; + + datain = esc->sc_datain; + + /* No DMA transfer for a "Transfer Pad" operation */ + if (esc->sc_dmasize == 0) + return; + + /* Sync the transfer buffer. */ + bus_dmamap_sync(esc->sc_xferdmat, esc->sc_xferdmam, datain != 0 ? + BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); + + /* Set the DMA engine to the IDLE state. */ + /* XXX DMA Transfer Interrupt Enable bit is broken? */ + WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE | /* DMACMD_INTE | */ + (datain != 0 ? DMACMD_DIR : 0)); + + /* Issue a DMA start command. */ + WRITE_DMAREG(esc, DMA_CMD, DMACMD_START | /* DMACMD_INTE | */ + (datain != 0 ? DMACMD_DIR : 0)); + + esc->sc_active = 1; +} + +static void +esp_pci_dma_stop(struct ncr53c9x_softc *sc) +{ + struct esp_pci_softc *esc = (struct esp_pci_softc *)sc; + + /* DMA stop */ + /* XXX what should we do here ? */ + WRITE_DMAREG(esc, DMA_CMD, + DMACMD_ABORT | (esc->sc_datain != 0 ? DMACMD_DIR : 0)); + bus_dmamap_unload(esc->sc_xferdmat, esc->sc_xferdmam); + + esc->sc_active = 0; +} + +static int +esp_pci_dma_isactive(struct ncr53c9x_softc *sc) +{ + struct esp_pci_softc *esc = (struct esp_pci_softc *)sc; + + /* XXX should we check esc->sc_active? */ + if ((READ_DMAREG(esc, DMA_CMD) & DMACMD_CMD) != DMACMD_IDLE) + return (1); + + return (0); +} Modified: head/sys/i386/conf/GENERIC ============================================================================== --- head/sys/i386/conf/GENERIC Tue Nov 1 21:21:36 2011 (r227005) +++ head/sys/i386/conf/GENERIC Tue Nov 1 21:26:57 2011 (r227006) @@ -110,7 +110,7 @@ options AHC_REG_PRETTY_PRINT # Print re device ahd # AHA39320/29320 and onboard AIC79xx devices options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. -device amd # AMD 53C974 (Tekram DC-390(T)) +device esp # AMD Am53C974 (Tekram DC-390(T)) device hptiop # Highpoint RocketRaid 3xxx series device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module Modified: head/sys/modules/Makefile ============================================================================== --- head/sys/modules/Makefile Tue Nov 1 21:21:36 2011 (r227005) +++ head/sys/modules/Makefile Tue Nov 1 21:26:57 2011 (r227006) @@ -89,6 +89,7 @@ SUBDIR= ${_3dfx} \ en \ ${_ep} \ ${_epic} \ + esp \ ${_et} \ ${_ex} \ ${_exca} \ Modified: head/sys/modules/esp/Makefile ============================================================================== --- head/sys/modules/esp/Makefile Tue Nov 1 21:21:36 2011 (r227005) +++ head/sys/modules/esp/Makefile Tue Nov 1 21:26:57 2011 (r227006) @@ -3,7 +3,8 @@ .PATH: ${.CURDIR}/../../dev/esp KMOD= esp -SRCS= device_if.h ${esp_sbus} bus_if.h ncr53c9x.c ${ofw_bus_if} opt_cam.h +SRCS= device_if.h esp_pci.c ${esp_sbus} bus_if.h ncr53c9x.c ${ofw_bus_if} +SRCS+= opt_cam.h pci_if.h .if ${MACHINE} == "sparc64" ofw_bus_if= ofw_bus_if.h Modified: head/sys/pc98/conf/GENERIC ============================================================================== --- head/sys/pc98/conf/GENERIC Tue Nov 1 21:21:36 2011 (r227005) +++ head/sys/pc98/conf/GENERIC Tue Nov 1 21:26:57 2011 (r227006) @@ -101,7 +101,7 @@ device siis # SiliconImage SiI3124/SiI # SCSI Controllers device adv # Advansys SCSI adapters device ahc # AHA2940 and onboard AIC7xxx devices -device amd # AMD 53C974 (Tekram DC-390(T)) +device esp # AMD Am53C974 (Tekram DC-390(T)) device isp # Qlogic family #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') Modified: head/sys/sparc64/conf/GENERIC ============================================================================== --- head/sys/sparc64/conf/GENERIC Tue Nov 1 21:21:36 2011 (r227005) +++ head/sys/sparc64/conf/GENERIC Tue Nov 1 21:26:57 2011 (r227006) @@ -103,11 +103,11 @@ device ahc # AHA2940 and onboard AIC7x options AHC_ALLOW_MEMIO # Attempt to use memory mapped I/O options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. +device esp # AMD Am53C974, Sun ESP and FAS families device isp # Qlogic family device ispfw # Firmware module for Qlogic host adapters device mpt # LSI-Logic MPT-Fusion device sym # NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D -device esp # NCR53c9x (FEPS/FAS366) # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI)