Date: Fri, 15 Feb 2002 02:21:22 -0800 (PST) From: Gerardo Enrique Paredes "Mancía" <gerardoparedes98@yahoo.com> To: freebsd-questions@freebsd.org, gerardo_enrique_paredes@hotmail.com Subject: Help with ed0 driver / NE2000 compatible NIC? Message-ID: <20020215102122.71735.qmail@web10008.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Ok, i'm am having a big problem with a NE2000 NIC, the
default settings from the installation didn't found
the card and i just tried a suggestion i found on the
freebsddiary telling me to change the irq to 10 port
to 0x300 and iomen to 0xcc000.
The systems is a dual boot FreeBSD/Win95, i haven't
fully replaced win on it because of this nic problem,
BTW i am using IE 3.0 so i can't use my hotmail.com
account, from where i am suscribed to this list, could
be SOMEONE KIND ENOUGH TO ANSWER TO MY MAIL ADDRESS:
gerardo_enrique_paredes@hotmail.com, IE3.0 let me look
at mail but when composing i don't see the TO: textbox
(one of the things i want to change this machine to
FreeBSD).
This is how my dmesg looks like, booting in -verbose
mode (windows says the card is NE2000 compatible is at
IRQ 5 and has an i/o range 02a0-02bf):
DMESG OUTPUT BOOTING VERBOSE
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD 4.2-RELEASE #2: Fri Feb 15 03:10:41 CST 2002
root@gerardo:/usr/src/sys/compile/OREO
Calibrating clock(s) ... TSC clock: 350802999 Hz,
i8254 clock: 1193207 Hz
CLK_USE_I8254_CALIBRATION not specified - using
default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old
calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201261056 (196544K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0030f000 - 0x0bfe7fff, 198021120 bytes (48345 pages)
avail memory = 192684032 (188168K bytes)
bios32: Found BIOS32 Service Directory header at
0xc00fdb50
bios32: Entry = 0xfdb60 (c00fdb60) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdb81
pnpbios: Found PnP BIOS data at 0xc00f7c40
pnpbios: Entry = f0000:76ce Rev = 1.0
Other BIOS signatures found:
ACPI: 000fb240
Preloaded elf kernel "kernel" at 0xc02f6000.
Preloaded userconfig_script "/boot/kernel.conf" at
0xc02f60ac.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f800
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is
there (id=56001039)
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is
there (id=56001039)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1039, dev=0x5600, revid=0x11
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base ec000000, size 26
found-> vendor=0x1039, dev=0x5513, revid=0xd0
class=01-01-80, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base 000001f0, size 3
map[14]: type 1, range 32, base 000003f4, size 2
map[18]: type 1, range 32, base 00000170, size 3
map[1c]: type 1, range 32, base 00000374, size 2
map[20]: type 1, range 32, base 0000ffa0, size 4
found-> vendor=0x1039, dev=0x0008, revid=0xb1
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1039, dev=0x0009, revid=0x00
class=ff-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1039, dev=0x0001, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x127a, dev=0x1025, revid=0x01
class=07-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base ebff0000, size 16
map[14]: type 1, range 32, base 0000de00, size 3
pci0: <PCI bus> on pcib0
atapci0: <SiS 5591 ATA33 controller> port
0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7
irq 0 at device 0.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 status0=50 status1=50
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=14 b=eb
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 status0=7f status1=7f
ata1: mask=03 ostat0=7f ostat2=7f
ata1-master: ATAPI probe a=7f b=7f
ata1-slave: ATAPI probe a=7f b=7f
ata1: mask=03 status0=7f status1=7f
ata1-master: ATA probe a=7f b=7f
ata1-slave: ATA probe a=7f b=7f
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on
pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x1039, dev=0x0009) at
1.1
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)>
at device 2.0 on pci0
found-> vendor=0x1039, dev=0x6326, revid=0x0b
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e7000000, size 23
map[14]: type 1, range 32, base e7ef0000, size 16
map[18]: type 1, range 32, base 0000cc00, size 7
pci1: <PCI bus> on pcib2
pci1: <SiS 6326 SVGA controller> (vendor=0x1039,
dev=0x6326) at 0.0
pci0: <unknown card> (vendor=0x127a, dev=0x1025) at
9.0 irq 9
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is
there (id=56001039)
pci-: pci1 exists, using next available unit number
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
@@@0001: start dependant
@@@0001: adding io range 0x530-0x537, size=0x8,
align=0x1
@@@0001: adding io range 0x388-0x38f, size=0x8,
align=0x1
@@@0001: adding irq mask 0x800
@@@0001: adding dma mask 0x1
@@@0001: start dependant
@@@0001: adding io range 0x530-0x537, size=0x8,
align=0x1
@@@0001: adding io range 0x388-0x38f, size=0x8,
align=0x1
@@@0001: adding irq mask 0x1ea0
@@@0001: adding dma mask 0xb
@@@0001: start dependant
@@@0001: adding io range 0x530-0xfe7, size=0x8,
align=0x10
@@@0001: adding io range 0x388-0x3ff, size=0x8,
align=0x10
@@@0001: adding irq mask 0x1ea0
@@@0001: adding dma mask 0xb
@@@0001: end dependant
@H@0001: start dependant
@H@0001: adding io range 0x330-0x331, size=0x2,
align=0x1
@H@0001: adding irq mask 0x200
@H@0001: start dependant
@H@0001: adding io range 0x300-0x331, size=0x2,
align=0x10
@H@0001: adding irq mask 0x1ea0
@H@0001: end dependant
@P@0001: start dependant
@P@0001: adding io range 0x200-0x207, size=0x8,
align=0x1
@P@0001: start dependant
@P@0001: adding io range 0x200-0xfe7, size=0x8,
align=0x10
@P@0001: end dependant
@X@0001: start dependant
@X@0001: adding io range 0x220-0x22f, size=0x10,
align=0x1
@X@0001: adding irq mask 0x20
@X@0001: adding dma mask 0x2
@X@0001: adding dma mask 0x20
@X@0001: start dependant
@X@0001: adding io range 0x220-0x24f, size=0x10,
align=0x20
@X@0001: adding irq mask 0x6a0
@X@0001: adding dma mask 0xb
@X@0001: adding dma mask 0xa0
@X@0001: start dependant
@X@0001: adding io range 0x220-0x28f, size=0x10,
align=0x20
@X@0001: adding irq mask 0x1ea0
@X@0001: adding dma mask 0xb
@X@0001: adding dma mask 0xe0
@X@0001: end dependant
JQE9000: adding io range 0x280-0x3ff, size=0x20,
align=0x20
JQE9000: adding irq mask 0x8c38
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1,
flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0001
psm0: strange result for test aux port (1).
kbdc: RESET_AUX return code:ffffffff
kbdc: RESET_AUX return code:ffffffff
kbdc: RESET_AUX return code:ffffffff
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0
size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons
terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on
isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
vpo0: can't connect to the drive
imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: can't connect to the drive
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ed0 failed to probe at port 0x300-0x31f iomem 0xcc000
irq 10 on isa0
isa_probe_children: probing PnP devices
unknown: <CMI8330/C3D Audio Adapter> failed to probe
at port 0x530-0x537,0x388-0x38f irq 11 drq 0 on isa0
unknown: <CMI8330/C3D Audio Adapter> failed to probe
at port 0x330-0x331 irq 9 on isa0
unknown: <CMI8330/C3D Audio Adapter> failed to probe
at port 0x200-0x207 on isa0
unknown: <CMI8330/C3D Audio Adapter> failed to probe
at port 0x220-0x22f irq 5 drq 1,5 on isa0
unknown: <PnP ISA Ethernet Adapter> failed to probe at
port 0x280-0x29f irq 10 on isa0
BIOS Geometries:
0:0209fe3f 0..521=522 cylinders, 0..254=255 heads,
1..63=63 sectors
0 accounted for
Device configuration finished.
new masks: bio 68c040, tty 63009a, net 67009a
ata0-master: success setting UDMA2 on SiS chip
Creating DISK ad0
Creating DISK wd0
ad0: <ST34321A/3.11> ATA-4 disk at ata0-master
ad0: 4103MB (8404830 sectors), 8894 cyls, 15 heads, 63
S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 4103MB <ST34321A> [8894/15/63] at ata0-master
UDMA33
ata0-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-slave: success setting PIO4 on generic chip
acd0: <ATAPI CD-ROM DRIVE 36X MAXIMUM/36DP> CDROM
drive at ata0 as slave
acd0: read 5512KB/s (5512KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x6, start 63, end = 4192964, size 4192902
: OK
ad0s2: type 0xa5, start 4192965, end = 8401994, size
4209030 : OK
start_init: trying /sbin/init
splash: image decoder found: blank_saver
Linux-ELF exec handler installed
********************************************************
********************************************************
********************************************************
KERNEL CONFIG FILE (OREO)
#
# GENERIC -- Generic kernel configuration file for
FreeBSD/i386
#
# For more information on this file, please read the
handbook section on
# Kernel Configuration Files:
#
#
http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in
/usr/share/doc/handbook
# if you've installed the doc distribution, otherwise
always see the
# FreeBSD World Wide Web server
(http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed
explanations of the
# device lines is also present in the ./LINT
configuration file. If you are
# in doubt as to the purpose or necessity of a line,
check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.20
2000/10/31 23:16:07 n_hibma Exp $
machine i386
#cpu I386_CPU
#cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident OREO
maxusers 128
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug
symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
#options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS
required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660
required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
#options SCSI_DELAY=15000 #Delay (in ms) before
probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time
extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in
/dev
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI
devices
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device amd # AMD 53C974 (Teckram DC-390(T))
#device isp # Qlogic family
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI
access)
# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI
RAID
#device dpt # DPT Smartcache - See LINT for options!
#device mly # Mylex AcceleRAID/eXtremeRAID
# RAID controllers
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2
mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an
SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220
compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt
console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with
the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 #
Advanced Power Management
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000
disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device fxp # Intel EtherExpress PRO/100B (82557,
82558)
#device tx # SMC 9432TX (83c170 ``EPIC'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
#device wx # Intel Gigabit Ethernet Card
(``Wiseman'')
# PCI Ethernet NICs that use the common MII bus
controller code.
# NOTE: Be sure to keep the 'device miibus' line in
order to use these NICs!
#device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
#device pcn # AMD Am79C79x PCI 10/100 NICs
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS
7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
device ed0 at isa? port 0x300 irq 10 iomem 0xcc000
#device ex
#device ep
#device fe0 at isa? port 0x300
# WaveLAN/IEEE 802.11 wireless NICs. Note: the
WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA
attatement needed
# and resources will always be dynamically assigned by
the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the
declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards
set to ISA PnP
# mode (the factory default). If you set the switches
on your ISA
# card for a manually chosen I/O address and IRQ, you
must specify
# those paremeters here.
#device an
# Xircom Ethernet
#device xe
# The probe order of these is presently determined by
i386/isa/isa_compat.c.
#device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 irq 10 drq 0
#device cs0 at isa? port 0x300
#device sn0 at isa? port 0x300 irq 10
# Pseudo devices - the number indicates how many units
to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device vn #Vnode driver (turns a
file into a device)
pseudo-device md # Memory "disks"
#pseudo-device gif 4 # IPv6 and IPv4 tunneling
#pseudo-device faith 1 # IPv6-to-IPv4 relaying
(translation)
# The `bpf' pseudo-device enables the Berkeley Packet
Filter.
# Be aware of the administrative consequences of
enabling this!
#pseudo-device bpf #Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus
and da
#device ums # Mouse
#device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
__________________________________________________
Do You Yahoo!?
Got something to say? Say it better with Yahoo! Video Mail
http://mail.yahoo.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020215102122.71735.qmail>