Date: Fri, 21 Mar 2003 17:08:40 +0100 From: Stefano Ceci <stefano.ceci@aruba.it> To: freebsd-questions@freebsd.org Subject: BKTR and Terratec: help me please! Message-ID: <200303211704.41534.stefano.ceci@aruba.it>
next in thread | raw e-mail | index | archive | help
Hello!
I'm working around a problem with my Terratec TValue Radio. I can see video
images but I cannot hear any sound, so Radio tuner seems not work at all.
I past here my dmesg and my bktr and audio kernel conf section.
Thank you very much for support.
Stefano Ceci
=====DMESG - start-====
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RC #0: Tue Mar 18 18:59:22 CET 2003
root@10.249.9.25:/usr/obj/usr/src/sys/OSSO
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(TM) XP1800+ (1544.51-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 268353536 (262064K bytes)
avail memory = 255762432 (249768K bytes)
Preloaded elf kernel "kernel" at 0xc053b000.
Preloaded elf module "linux.ko" at 0xc053b09c.
Preloaded elf module "nvidia.ko" at 0xc053b13c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f1480
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce4 MX 440> mem
0xef800000-0xef87ffff,0xf0000000-0xf7ffffff,0xed000000-0xedffffff irq 11 at
device 0.0 on pci1
atapci0: <Promise ATA100 controller> port
0xb400-0xb43f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 mem
0xec800000-0xec81ffff irq 10 at device 6.0 on pci0
ata2: at 0xd800 on atapci0
ata3: at 0xd000 on atapci0
pcm0: <CMedia CMI8738> port 0xb000-0xb0ff irq 10 at device 12.0 on pci0
bktr0: <BrookTree 878> mem 0xee800000-0xee800fff irq 11 at device 13.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus1: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Warning - card vendor 0x153b (model 0x1135) unknown.
bktr0: Pinnacle/Miro TV, Philips NTSC tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 11
rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xec000000-0xec0000ff
irq 10 at device 16.0 on pci0
rl0: Ethernet address: 00:e0:7d:b6:77:2d
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viapropm0: SMBus I/O base at 0xe800
viapropm0: <VIA VT8233 Power Management Unit> port 0xe800-0xe80f at device
17.0 on pci0
viapropm0: SMBus revision code 0x0
atapci1: <VIA 8233 ATA100 controller> port 0xa400-0xa40f irq 0 at device 17.1
on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 10 at device 17.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Iomega USB Zip 100, rev 1.10/1.00, addr 2
umass0: Get Max Lun not supported (STALLED)
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 10 at device 17.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x9400-0x941f irq 10 at device 17.4 on
pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
isa0: <ISA bus> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP/ECP_RLE
Probing for PnP devices on ppbus0:
ppbus0: <Xerox DocuPrint P1202> PRINTER PCL5E
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 58644MB <Maxtor 6Y060L0> [119150/16/63] at ata0-master UDMA100
acd0: CD-RW <HL-DT-ST GCE-8481B> at ata1-master PIO4
acd1: CDROM <54X CD-ROM> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <IOMEGA ZIP 100 10.V> Removable Direct Access SCSI-0 device
da0: 650KB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
pid 233 (soffice.bin), uid 1001: exited on signal 6 (core dumped)
pid 454 (soffice.bin), uid 1001: exited on signal 6 (core dumped)
bktr0: Radio frequency out of range
bktr0: Radio frequency out of range
bktr0: Radio frequency out of range
pid 270 (kdesud), uid 1001: exited on signal 11
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 7
done
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RC #1: Fri Mar 21 13:55:44 CET 2003
root@10.249.9.25:/usr/obj/usr/src/sys/OSSO
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(TM) XP1800+ (1544.51-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 268353536 (262064K bytes)
avail memory = 255762432 (249768K bytes)
Preloaded elf kernel "kernel" at 0xc053b000.
Preloaded elf module "linux.ko" at 0xc053b09c.
Preloaded elf module "nvidia.ko" at 0xc053b13c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f1480
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce4 MX 440> mem
0xef800000-0xef87ffff,0xf0000000-0xf7ffffff,0xed000000-0xedffffff irq 11 at
device 0.0 on pci1
atapci0: <Promise ATA100 controller> port
0xb400-0xb43f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 mem
0xec800000-0xec81ffff irq 10 at device 6.0 on pci0
ata2: at 0xd800 on atapci0
ata3: at 0xd000 on atapci0
pcm0: <CMedia CMI8738> port 0xb000-0xb0ff irq 10 at device 12.0 on pci0
bktr0: <BrookTree 878> mem 0xee800000-0xee800fff irq 11 at device 13.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus1: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Warning - card vendor 0x153b (model 0x1135) unknown.
bktr0: Pinnacle/Miro TV, Philips FR1216 PAL FM tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 11
rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xec000000-0xec0000ff
irq 10 at device 16.0 on pci0
rl0: Ethernet address: 00:e0:7d:b6:77:2d
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viapropm0: SMBus I/O base at 0xe800
viapropm0: <VIA VT8233 Power Management Unit> port 0xe800-0xe80f at device
17.0 on pci0
viapropm0: SMBus revision code 0x0
atapci1: <VIA 8233 ATA100 controller> port 0xa400-0xa40f irq 0 at device 17.1
on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 10 at device 17.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Iomega USB Zip 100, rev 1.10/1.00, addr 2
umass0: Get Max Lun not supported (STALLED)
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 10 at device 17.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x9400-0x941f irq 10 at device 17.4 on
pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
isa0: <ISA bus> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP/ECP_RLE
Probing for PnP devices on ppbus0:
ppbus0: <Xerox DocuPrint P1202> PRINTER PCL5E
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 58644MB <Maxtor 6Y060L0> [119150/16/63] at ata0-master UDMA100
acd0: CD-RW <HL-DT-ST GCE-8481B> at ata1-master PIO4
acd1: CDROM <54X CD-ROM> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <IOMEGA ZIP 100 10.V> Removable Direct Access SCSI-0 device
da0: 650KB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
bktr0: Radio frequency out of range
bktr0: Radio frequency out of range
bktr0: Radio frequency out of range
bktr0: Radio frequency out of range
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 5
done
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RC #2: Fri Mar 21 14:17:40 CET 2003
root@10.249.9.25:/usr/obj/usr/src/sys/OSSO
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(TM) XP1800+ (1544.51-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 268353536 (262064K bytes)
avail memory = 255762432 (249768K bytes)
Preloaded elf kernel "kernel" at 0xc053b000.
Preloaded elf module "linux.ko" at 0xc053b09c.
Preloaded elf module "nvidia.ko" at 0xc053b13c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f1480
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce4 MX 440> mem
0xef800000-0xef87ffff,0xf0000000-0xf7ffffff,0xed000000-0xedffffff irq 11 at
device 0.0 on pci1
atapci0: <Promise ATA100 controller> port
0xb400-0xb43f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 mem
0xec800000-0xec81ffff irq 10 at device 6.0 on pci0
ata2: at 0xd800 on atapci0
ata3: at 0xd000 on atapci0
pcm0: <CMedia CMI8738> port 0xb000-0xb0ff irq 10 at device 12.0 on pci0
bktr0: <BrookTree 878> mem 0xee800000-0xee800fff irq 11 at device 13.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus1: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: TerraTVplus, Philips FR1216 PAL FM tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 11
rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xec000000-0xec0000ff
irq 10 at device 16.0 on pci0
rl0: Ethernet address: 00:e0:7d:b6:77:2d
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viapropm0: SMBus I/O base at 0xe800
viapropm0: <VIA VT8233 Power Management Unit> port 0xe800-0xe80f at device
17.0 on pci0
viapropm0: SMBus revision code 0x0
atapci1: <VIA 8233 ATA100 controller> port 0xa400-0xa40f irq 0 at device 17.1
on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 10 at device 17.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Iomega USB Zip 100, rev 1.10/1.00, addr 2
umass0: Get Max Lun not supported (STALLED)
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 10 at device 17.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x9400-0x941f irq 10 at device 17.4 on
pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
isa0: <ISA bus> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP/ECP_RLE
Probing for PnP devices on ppbus0:
ppbus0: <Xerox DocuPrint P1202> PRINTER PCL5E
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 58644MB <Maxtor 6Y060L0> [119150/16/63] at ata0-master UDMA100
acd0: CD-RW <HL-DT-ST GCE-8481B> at ata1-master PIO4
acd1: CDROM <54X CD-ROM> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <IOMEGA ZIP 100 10.V> Removable Direct Access SCSI-0 device
da0: 650KB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 5
done
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RC #3: Fri Mar 21 16:44:46 CET 2003
root@10.249.9.25:/usr/obj/usr/src/sys/OSSO
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(TM) XP1800+ (1544.51-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 268353536 (262064K bytes)
avail memory = 255762432 (249768K bytes)
Preloaded elf kernel "kernel" at 0xc053b000.
Preloaded elf module "linux.ko" at 0xc053b09c.
Preloaded elf module "nvidia.ko" at 0xc053b13c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f1480
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce4 MX 440> mem
0xef800000-0xef87ffff,0xf0000000-0xf7ffffff,0xed000000-0xedffffff irq 11 at
device 0.0 on pci1
atapci0: <Promise ATA100 controller> port
0xb400-0xb43f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 mem
0xec800000-0xec81ffff irq 10 at device 6.0 on pci0
ata2: at 0xd800 on atapci0
ata3: at 0xd000 on atapci0
pcm0: <CMedia CMI8738> port 0xb000-0xb0ff irq 10 at device 12.0 on pci0
bktr0: <BrookTree 878> mem 0xee800000-0xee800fff irq 11 at device 13.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus1: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Detected a MSP3434\^A-\M^\0 at 0x80
bktr0: TerraTVplus, Philips FR1216 PAL FM tuner, dbx stereo, msp3400c stereo.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 11
rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xec000000-0xec0000ff
irq 10 at device 16.0 on pci0
rl0: Ethernet address: 00:e0:7d:b6:77:2d
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viapropm0: SMBus I/O base at 0xe800
viapropm0: <VIA VT8233 Power Management Unit> port 0xe800-0xe80f at device
17.0 on pci0
viapropm0: SMBus revision code 0x0
atapci1: <VIA 8233 ATA100 controller> port 0xa400-0xa40f irq 0 at device 17.1
on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 10 at device 17.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Iomega USB Zip 100, rev 1.10/1.00, addr 2
umass0: Get Max Lun not supported (STALLED)
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 10 at device 17.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x9400-0x941f irq 10 at device 17.4 on
pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
isa0: <ISA bus> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP/ECP_RLE
Probing for PnP devices on ppbus0:
ppbus0: <Xerox DocuPrint P1202> PRINTER PCL5E
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 58644MB <Maxtor 6Y060L0> [119150/16/63] at ata0-master UDMA100
acd0: CD-RW <HL-DT-ST GCE-8481B> at ata1-master PIO4
acd1: CDROM <54X CD-ROM> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <IOMEGA ZIP 100 10.V> Removable Direct Access SCSI-0 device
da0: 650KB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
======DMESG - end -====
======KERNEL for bktr and audio - start====
# AUDIO SUPPORT
device pcm # Supporto scheda audio CMI8738
# RADIO-TV TUNER SUPPORT
device smbus
device viapm
device iicbus
device iicbb
device bktr
options OVERRIDE_CARD=16
options OVERRIDE_TUNER=10
options OVERRIDE_MSP=1
options OVERRIDE_DBX=1
options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
options BKTR_USE_PLL
options BKTR_GPIO_ACCESS
options BKTR_NO_MSP_RESET
options BKTR_SIS_VIA_MODE
======KERNEL for bktr and audio - end====
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303211704.41534.stefano.ceci>