Date: Fri, 06 Sep 2002 11:48:41 -0400 From: "Jud" <jud@myrealbox.com> To: bulldog@fxp.org Cc: questions@freebsd.org, jedgar@fxp.org Subject: Re: Promise RAID and FreeBSD Message-ID: <1031327321.d3333aa0jud@myrealbox.com>
next in thread | raw e-mail | index | archive | help
-----Original Message-----
From: Bob Bomar <bulldog@fxp.org>
To: questions@freebsd.org
Date: Fri, 6 Sep 2002 11:24:25 -0400
Subject: Promise RAID and FreeBSD
I just go my new box set up I am running an MSI KT3-Ultra-ARU.
It has an on board Promise RAID Controller. But when I tried
installing FBSD When the drives were on the RAID Controller,=20
FBSD did not see them. I have FBSD set up with one of the drives
on IDE 1 Master, and when I run dmesg I do not see the controller.
Am I missing something?
Thanks
____________________________________
My onboard Promise PDC20276 RAID controller is=20
detected automagically by 4.7-PRERELEASE. The only=20
thing I can think to ask is, do you have your RAID=20
array set up in the BIOS?
Jud
____________________________________
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-PRERELEASE #0: Fri Sep 6 09:09:44 CDT 2002
root@warrior.bomar.us:/usr/obj/usr/src/sys/Warrior
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) XP 2200+ (1800.07-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x680 Stepping =3D 0
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=3D0xc0400000<AMIE,DSP,3DNow!>
real memory =3D 536805376 (524224K bytes)
avail memory =3D 517545984 (505416K bytes)
Preloaded elf kernel "kernel" at 0xc04df000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f8060
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=3D1106 device=3Db099)> at device 1.0 on p=
ci0
pci1: <PCI bus> on pcib1
pci1: <Number Nine model 5348 graphics accelerator> at 0.0 irq 11
ahc_pci0: <Adaptec 2902/04/10/15/20/30C SCSI adapter> port 0xec00-0xecff me=
m 0xdffff000-0xdfffffff irq 11 at device 5.0 on pci0
aic7850: Single Channel A, SCSI Id=3D7, 3/253 SCBs
bktr0: <BrookTree 878> mem 0xdfdfe000-0xdfdfefff irq 10 at device 6.0 on pc=
i0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus1: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
smb0: <SMBus general purpose I/O> on smbus0
bktr0: Hauppauge Model 44801 C310
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner.
pci0: <unknown card> (vendor=3D0x109e, dev=3D0x0878) at 6.1 irq 10
dc0: <ADMtek AN985 10/100BaseTX> port 0xe800-0xe8ff mem 0xdfffec00-0xdfffef=
ff irq 10 at device 8.0 on pci0
dc0: Ethernet address: 00:20:78:04:1b:45
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0: <NEC uPD 9210 USB controller> mem 0xdfffc000-0xdfffcfff irq 10 at de=
vice 11.0 on pci0
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xdfffd000-0xdfffdfff irq 10 at de=
vice 11.1 on pci0
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <USB controller> at 11.2 irq 11
isab0: <PCI to ISA bridge (vendor=3D1106 device=3D3147)> at device 17.0 on =
pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA133 controller> port 0xfc00-0xfc0f at device 17.1 on =
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 10 at device 17.2=
on pci0
usb2: <VIA 83C572 USB controller> on uhci0
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 10 at device 17.3=
on pci0
usb3: <VIA 83C572 USB controller> on uhci1
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pcm0: <VIA VT8233A> port 0xe400-0xe4ff irq 10 at device 17.5 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.29 initialized. Default =3D pass all, Logging =3D enabled
ad2: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata1-master UDMA100
acd0: CDROM <CD-ROM CDU701> at ata0-master PIO4
acd1: CD-RW <Hewlett-Packard CD-Writer Plus 8200> at ata0-slave PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad2s1a
--
/----------------------------------------------------------------\
| Bob Bomar =09bulldog@fxp.org =09http://www.bomar.us/~bob |
|=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D|
| FreeBSD: The Power to Serve.=09=09http://www.freeBSD.org |
\----------------------------------------------------------------/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1031327321.d3333aa0jud>