Date: Thu, 27 Sep 2001 15:29:13 -0400 From: grafe@eng.utoledo.edu (Gary E. RAFE) To: freebsd-mobile@freebsd.org Subject: Q: APM, sound on Toshiba Satellite 1800 S253? Message-ID: <200109271929.PAA07606@strange.eng.utoledo.edu>
next in thread | raw e-mail | index | archive | help
Not wanting to forfeit my nearly year-old Toshiba Freecards,
which were coming due soon,
I went ahead and ordered a new Satellite 1800 S253.
The notebook arrived this morning, and my (old) installation
of 4.3-R went on without any difficulty.
After building a kernel with apm(4), I gave the new kernel a go
and tried an "apm -z" at a console prompt to see what might happen
(no XFree86 yet).
A short while later, I re-applied power, only to be informed that
the resume had failed.
Trying this with a kernel with the broken stat clock flag (0x20)
produced the same results: resume failure.
Output of apm(8) and dmesg(8) are provided below.
The new kernel had support for pcm(4) compiled in,
but came up unrecognized.
I would appreciate any insights knowledgable readers might offer
on support for APM and sound on this (newer) Toshiba model
(e.g., does Toshiba now require a suspend-to-disk partition,
since our 2-year-old 4030CDT works perfectly with 4.3-R).
Regards,
--
Gary Rafe
grafe@eng.utoledo.edu
-- --
apm(8):
APM version: 1.2
APM Managment: Enabled
AC Line status: on-line
Battery status: high
Remaining battery life: 100%
Remaining battery time: 3:56:00
Number of batteries: 1
Battery 0:
Battery status: high
Remaining battery life: 100%
Remaining battery time: 3:56:00
Resume timer: disabled
Resume on ring indicator: disabled
APM Capacities:
global standby state
global suspend state
resume timer from suspend
-- --
apm(8):
dmesg(8):
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #2: Thu Sep 27 14:40:22 EDT 2001
root@toshnik1:/usr/src/sys/compile/TS1800S253A
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (851.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 259981312 (253888K bytes)
avail memory = 249905152 (244048K bytes)
Preloaded elf kernel "kernel" at 0xc0328000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc032809c.
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02cad00 (1000040)
VESA: Trident CYBER 8620
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8620 VGA-compatible display device> at 0.0 irq 11
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xfdfff000-0xfdffffff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xeff0-0xefff at device 4.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x10b9, dev=0x5451) at 6.0 irq 11
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
alpm0: <AcerLabs M15x3 Power Management Unit> at device 8.0 on pci0
alpm0: driver is using old-style compatibility shims
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xeb40-0xeb7f mem 0xfde00000-0xfdefffff,0xfdffd000-0xfdffdfff irq 11 at device 10.0 on pci0
fxp0: Ethernet address 00:00:39:b1:f1:a3
smbus0: <System Management Bus> on alsmb0
smb0: <SMBus general purpose I/O> on smbus0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pca0 at port 0x40 on isa0
ad0: 14403MB <TOSHIBA MK1517GAP> [29264/16/63] at ata0-master UDMA66
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200109271929.PAA07606>