Date: Sun, 7 Sep 2003 20:50:48 -0700 From: "Jonas" <jonas@netwood.net> To: <freebsd-questions@freebsd.org>, <freebsd-hardware@freebsd.org> Subject: RE: IBM 120 G IDE -- problems Message-ID: <003301c375bc$6465a3f0$0800a8c0@master> In-Reply-To: <20030908033533.GB47926@freebsd1.cimlogic.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
OH MAN...... You don't know how many hours you just saved me!!! It boots up beautifully with 3 drives. Thank you!!!! For future reference, do you know why this happens? Jonas Fornander - System Administrator Netwood Communications,LLC - www.netwood.net Find out why we're better - 310-442-1530 =20 > -----Original Message----- > From: John Birrell [mailto:jb@cimlogic.com.au]=20 > Sent: Sunday, September 07, 2003 8:36 PM > To: Jonas > Cc: freebsd-questions@freebsd.org; freebsd-hardware@freebsd.org > Subject: Re: IBM 120 G IDE -- problems >=20 >=20 > On Sun, Sep 07, 2003 at 08:27:18PM -0700, Jonas wrote: > >=20 > > I have the exact same problem with two brand new MB's from Asus. The > > model is P4P800 and P4P800-VM and all the drives are brand=20 > new Seagate > > IDE drives. I have removed the CD-ROM drive and the box=20 > boots up fine > > with Primary and Secondary master but as soon as I add a=20 > 3rd drive the > > boot process hangs on ata0 (or ata1) "Resetting=20 > devices....". Changing > > the drive to Cable-Select or putting the slave at the end=20 > of the cable > > doesn't fix the problem either. >=20 > I have that problem with an ASUS P4S533 motherboard. I add=20 > these sysctl > values to /boot/loader.conf: >=20 > hw.ata.ata_dma=3D"0" > hw.ata.atapi_dma=3D"0" >=20 > You can also interrupt the boot loader and type: >=20 > set hw.ata.ata_dma=3D"0" > set hw.ata.atapi_dma=3D"0" > boot >=20 > --=20 > John Birrell >=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003301c375bc$6465a3f0$0800a8c0>