Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 16 Aug 2002 10:13:46 -0700 (PDT)
From:      Matthew Jacob <mjacob@feral.com>
To:        Jan Lentfer <Jan.Lentfer@web.de>
Cc:        freebsd-questions@FreeBSD.ORG, freebsd-alpha@FreeBSD.ORG
Subject:   Re: Problems with external SCSI device
Message-ID:  <Pine.BSF.4.21.0208161013390.38035-100000@beppo>
In-Reply-To: <1029512346.3d5d1c9aa1125@www-mail.lan>

next in thread | previous in thread | raw e-mail | index | archive | help

Sounds like a shorted out SCSI Bus.


On Fri, 16 Aug 2002, Jan Lentfer wrote:

> Hi all,
> 
> sorry for cross-posting but I am not quite sure if this maybe a alpha specific
> problem.
> 
> Here is the situation:
> I bought an external DAT streamer from ebay, whenever I try to boot with the
> streamer connected I machine stops with:
> 
> ahc0: Someone reset channel A
> 
> 
> Here is the scsi part of my dmesg without the streamer:
> [...]
> ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x8000-0x80ff mem 0x80040000-0x8004
> 0fff irq 20 at device 10.0 on pci1
> ahc0: interrupting at CIA irq 20
> aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
> [...]
> da1 at ahc0 bus 0 target 8 lun 0
> da1: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device 
> da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
> da1: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C)
> da0 at ahc0 bus 0 target 0 lun 0
> da0: <COMPAQ ST15150W 6216> Fixed Direct Access SCSI-2 device 
> da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
> da0: 4094MB (8386000 512 byte sectors: 255H 63S/T 522C)
> [...]
> 
> this is the relevant part of my kernel-config:
> # SCSI Controllers
> device          ahc             # AHA2940 and onboard AIC7xxx devices
> #device         esp             # 53C94 & friends, not CAM-ified
> #device         isp             # Qlogic family
> #device         ncr             # NCR/Symbios Logic
> #device         sym             # NCR/Symbios Logic (newer chipsets)
> 
> # SCSI peripherals
> device          scbus           # SCSI bus (required)
> device          da              # Direct Access (disks)
> device          sa              # Sequential Access (tape etc)
> device          cd              # CD
> device          pass            # Passthrough device (direct SCSI access)
> 
> I tried different IDs on the streamer - no effect.
> 
> 
> Can anyone help me?
> 
> Many Thanks in advance,
> 
> Jan
> 
> 
> PS: uname -a
> FreeBSD jan-alpha.lan 4.6.1-RELEASE-p5 FreeBSD 4.6.1-RELEASE-p5 #1: Fri Aug 16
> 17:18:26 CEST 2002     jan@jan-alpha.lan:/usr/src/sys/compile/EV56  alpha
> 
> This is a DEC PWS 500a
> 
> 
> -------------------------------------------------
> This mail sent through IMP: http://horde.org/imp/
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-alpha" in the body of the message
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0208161013390.38035-100000>