Date: Tue, 31 Dec 2013 12:23:21 +0400 From: =?UTF-8?B?QW50b24=?= <felix_mail@mail.ru> To: =?UTF-8?B?QWRyaWFuIENoYWRk?= <adrian@freebsd.org> Cc: =?UTF-8?B?ZnJlZWJzZC1taXBzQGZyZWVic2Qub3Jn?= <freebsd-mips@freebsd.org> Subject: =?UTF-8?B?UmVbMl06IFJCNDUwRyBjb21waWxpbmcgdGhlIGtlcm5lbA==?= Message-ID: <1388478201.16007730@f292.i.mail.ru> In-Reply-To: <CAJ-VmomzUv5CSK67VdMMnsPvS4LkRvQMqkg_sMT_fzNti30P1g@mail.gmail.com> References: <1388404360.131024714@f310.i.mail.ru> <CAJ-VmomzUv5CSK67VdMMnsPvS4LkRvQMqkg_sMT_fzNti30P1g@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Adrian thanks! I resolved the problem. There was need to add both options in hints file at the same time. hints.argemdio.0.at="nexus0" hints.argemdio.0. .... hints.arge.0.at="nexus0" hints.arge.0. .... Понедельник, 30 декабря 2013, 11:38 -08:00 от Adrian Chadd <adrian@freebsd.org>: >On 30 December 2013 03:52, Антон Петухов < felix_mail@mail.ru > wrote: >> >> Hi, >> Can you help me? How can I use AR7161 + AR8316 as two interfaces available to the kernel? Etherswitch is very good solution, but he's black box for me. If I try to compile kernel with switch - all is Ok, but in this case system have only one arge1. >> I need to route traffic between arge0 and arge1 ports... How, how can I do it? :) > >Well, it depends on how it's wired up. > >The AR8316 (and other atheros switches) have an option to peel off one >of the ports as a dedicated PHY port, for situations where you have >two MACs on the SoC and you want to have a WAN port and multiple LAN >ports. > >Theres three ways to do it: > >* have one MAC port, map all switch ports to it, then peel off lan/wan >via VLAN ids >* have two MAC ports, have one port dedicated as a pass-through PHY >for the WAN port and the rest be switch ports for the LAN (vlan or >otherwise) >* a hybrid - have two MAC ports, and just map them using vlan ids or >per-port vlans as required. > >So it boils down to whether the RB450G wires both arge interfaces to >the switch. If so, you can peel off a dedicated WAN PHY/port by >configuring up the 'phy4cpu' option in the hints file. Otherwise it's >vlans all the way down. > > >-adrian -- Anton
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1388478201.16007730>