Date: Fri, 16 Jul 2004 18:37:08 -0700 (PDT) From: freebsder <freebsder51@yahoo.com> To: wmoran@potentialtech.com Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD 5.1 <-> WinXP Networking Problem UPDATE #2 Message-ID: <20040717013708.25332.qmail@web52506.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi Bill,
The interface creates tun0 when it dials but I tried
both "tun0" and "ppp0" and neither seemed to do the
trick.
Any other trouble shooting thoughts or ideas?
Nav
new RC.CONF :
## Firewall
[...]
natd_interface="tun0"
#natd_interface="ppp0"
#natd_interface="vr0"
natd_flags="redirect_port tcp 192.168.1.1:80 80"
rpc_statd_enable="YES"
tcp_extensions="YES"
## Mail
sendmail_enable="YES"
IFCONFIG :
#ifconfig
ed0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
inet 192.168.1.1 netmask 0xffffff00 broadcast
192.168.1.255
inet6 fe80::280:c8ff:fede:c937%ed0 prefixlen
64 scopeid 0x1
ether 00:80:c8:de:c9:37
vr0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
inet6 fe80::20e:a6ff:fe9c:c81d%vr0 prefixlen
64 scopeid 0x2
inet 192.168.0.1 netmask 0xffffff00 broadcast
192.168.0.255
ether 00:0e:a6:9c:c8:1d
media: Ethernet 10baseT/UTP
status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu
1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu
1492
inet 6X.7X.5X.23X --> 6X.23X.25X.12X netmask
0xffffffff
Opened by PID 215
ORIGINAL MESSAGE
Subject:
Re: FreeBSD 5.1 <-> WinXP Networking Problem UPDATE
#2
freebsder <freebsder51@yahoo.com> wrote:
> All my computers can ping each other! BUT I can
only
> connect to the internet from the FreeBSD server.
All
> requests made by the WinXP machines go unanswered!!
> Yet when I ping from them, they can connect to any
> computer on the network BUT CANNOT ping OUTSIDE the
> network nor fetch any information outside this
> network.
>
> Any ideas why my FreeBSD machine is not routing
these
> requests and putting up a road block?
>
> RC.CONF
>
> font8x14="NO"
> font8x16="swiss-8x16"
> font8x8="swiss-8x8"
> inetd_enable="YES"
> linux_enable="YES"
> moused_enable="YES"
> moused_port="/dev/psm0"
> moused_type="auto"
> nfs_client_enable="YES"
> nfs_server_enable="YES"
> rpcbind_enable="YES"
> saver="rain"
> scrnmap="NO"
> usbd_enable="YES"
> ifconfig_vr0="DHCP"
> ifconfig_ed0="DHCP"
>
> ##initialise NIC
> network_interfaces="vr0 ed0 lo0 tun0"
> ifconfig tun0
>
> #ifconfig vr0= "media 10baseT/UTP up"
> #ifconfig_ed0="inet 192.168.0.3 netmask
255.255.0.0"
>
> #Changes as suggested:
> ifconfig_ed0="inet 192.168.1.1/24"
> ifconfig_vr0="inet 192.168.0.1/24 media
10baseT/UTP
> up"
>
> #ifconfig_vr0="inet 192.168.0.1 netmask
255.255.0.0"
>
> hostname="my.server.com"
>
> ##User ppp configuration
> ppp_enable="YES"
> ppp_mode="ddial"
> ppp_nat="NO"
> ppp_profile="bellnet"
> #ppp_user="root"
>
>
> ## Firewall
> gateway_enable="YES"
> firewall_enable="YES"
> firewall_type="OPEN"
> #firewall_quiet="NO"
> firewall_script="/etc/rc/firewall"
> natd_enable="YES"
> natd_interface="vr0"
I believe you'll want:
natd_interface="ppp0"
or is it "tun0"? I don't remember (long time since
I've used ppp) but
the
upshot is that whatever interface ppp creates when it
dials, that's
what you
want natd_interface set to.
> natd_flags="redirect_port tcp 192.168.1.1:80
80"
> rpc_statd_enable="YES"
> tcp_extensions="YES"
>
> ## Mail
> sendmail_enable="YES"
__________________________________
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
http://advision.webevents.yahoo.com/yahoo/votelifeengine/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040717013708.25332.qmail>