Date: Sat, 27 Nov 2004 15:56:39 -0500 From: "Michael G. Jung" <mikej@confluenttech.com> To: <freebsd-sparc64@freebsd.org> Subject: Re: 5.3 on ultra1E: scsi disk not detected Message-ID: <9D7F0DF3FB16D41184010050DA90E00001C87441@neo.confluentasp.local>
next in thread | raw e-mail | index | archive | help
With the ongoing threads about the Ultra2 and SCSI disk detection I = thought I would try my=20 Ultra 1E and see what happened... note that it had openbsd/solaris on it = and no problems.... I got this.... and not there are no external SCSI devices attached.... The SCSI bus is hung. Perhaps an external device is turned off. ofwd_open: Could not open = /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@6,0:a this is interesting since it just booted off this device... This is a spare - so I'll be glad to load/run anything that may help.... --mikej ok boot cdrom Resetting ... Sun Ultra 1 SBus (UltraSPARC 143MHz), No Keyboard OpenBoot 3.11, 256 MB memory installed, Serial #8589047. Ethernet address 8:0:20:83:e:f7, Host ID: 80830ef7. Rebooting with command: boot cdrom Boot device: /sbus/espdma@e,8400000/esp@e,8800000/sd@6,0:f File and = args: >> FreeBSD/sparc64 boot block Boot path: /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@6,0:f Boot loader: /boot/loader Console: Open Firmware console Boot path set to /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@6,0:a FreeBSD/sparc64 bootstrap loader, Revision 1.0 (root@bobbi.cse.buffalo.edu, Fri Nov 5 02:16:10 UTC 2004) bootpath=3D"/sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@6,0:a" Loading /boot/defaults/loader.conf /boot/kernel/kernel data=3D0x3b5f08+0x49e28 = syms=3D[0x8+0x4ef60+0x8+0x43746] | Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 7 seconds... Type '?' for a list of commands, 'help' for more detailed help. OK boot -v nothing to autoload yet. The SCSI bus is hung. Perhaps an external device is turned off. ofwd_open: Could not open = /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@6,0:a jumping to kernel entry at 0xc0040000. stray vector interrupt 2033 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD 5.3-RELEASE #0: Fri Nov 5 19:30:40 UTC 2004 root@bobbi.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0896000. Preloaded mfs_root "/boot/mfsroot" at 0xc08961a0. Timecounter "tick" frequency 142987296 Hz quality 1000 real memory =3D 268435456 (256 MB) avail memory =3D 243761152 (232 MB) machine: SUNW,Ultra-1 cpu0: Sun Microsystems UltraSparc-I Processor (142.99 MHz CPU) mask=3D0x22 maxtl=3D5 maxwin=3D7 mem: <memory> null: <null device, zero device> random: <entropy source, Software, Yarrow> openfirm: <Open Firmware control device> nexus0: <Open Firmware Nexus device> sbus0: clock 25.000 MHz sbus dvma: DVMA map: 0xfc000000 to 0xffffffff initalizing intr_countp sbus0: [FAST] sbus0: [FAST] initializing counter-timer Timecounter "counter-timer" frequency 1000000 Hz quality 100 sbus0: <U2S UPA-SBus bridge> on nexus0 sbus0: <SUNW,CS4231>, type (unknown) (no driver attached) sbus0: <auxio>, type (unknown) (no driver attached) sbus0: <flashprom>, type (unknown) (no driver attached) sbus0: <SUNW,fdtwo>, type block (no driver attached) eeprom0: <EEPROM/clock> mem 0x1200000-0x1201fff on sbus0 eeprom0: model mk48t59 eeprom0: registered as a time-of-day clock (resolution 1000000us) eeprom0: hostid 80830ef7 eeprom0: current time: 1.000000002 zs0: <Zilog Z8530> mem 0x1100000-0x1100003 irq 2024 on sbus0 zs0: [FAST] zstty0: <ttya> on zs0 zstty0: console 9600,8,n,1,- zstty1: <ttyb> on zs0 sbus0: <zs>, type serial (no driver attached) sbus0: <sc>, type (unknown) (no driver attached) sbus0: <SUNW,pll>, type (unknown) (no driver attached) sbus0: <espdma>, type (unknown) (no driver attached) sbus0: <ledma>, type (unknown) (no driver attached) sbus0: <SUNW,bpp>, type (unknown) (no driver attached) sbus0: <cgsix>, type display (no driver attached) procfs registered Timecounters tick every 10.000 msec lo0: bpf attached md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc04923e8 GEOM: Configure md0c, start 0 length 4128768 end 4128767 Mounting root from ufs:/dev/md0 Invalid time in real time clock. Check and reset the date immediately! start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /stand/sysinstall /stand/sysinstall running as init on serial console These are the predefined terminal types available to sysinstall when running stand-alone. Please choose the closest match for your particular terminal. 1 ...................... Standard ANSI terminal. 2 ...................... VT100 or compatible terminal. 3 ...................... FreeBSD system console (color). 4 ...................... FreeBSD system console (monochrome). 5 ...................... xterm terminal emulator. Your choice: (1-5)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9D7F0DF3FB16D41184010050DA90E00001C87441>