Date: Tue, 24 May 2011 07:55:38 -0400 From: John Baldwin <jhb@freebsd.org> To: "N.J. Mann" <njm@njm.me.uk> Cc: freebsd-hardware@freebsd.org Subject: Re: Sunix 4056A PCI 4 port RS-232 card - only 2 ports configured Message-ID: <201105240755.38404.jhb@freebsd.org> In-Reply-To: <20110523151708.GA671@titania.njm.me.uk> References: <20110522110002.GB91694@titania.njm.me.uk> <201105231026.54178.jhb@freebsd.org> <20110523151708.GA671@titania.njm.me.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Monday, May 23, 2011 11:17:08 am N.J. Mann wrote:
> In message <201105231026.54178.jhb@freebsd.org>,
> John Baldwin (jhb@freebsd.org) wrote:
> > On Sunday, May 22, 2011 7:00:02 am N.J. Mann wrote:
> > > Hi,
> > >
> > >
> > > I am trying to setup a console server, but I am having a problem with
> > > the hardware. The RS-232 card I am using is a Sunix 4056A Universal PCI
> > > 4 port RS-232 card. However, only two ports are being configured, uart2
> > > and uart3 - uart0 and uart1 are on the motherboard. I had assumed that
> > > all I had to do was install the card, add puc(4) to my kernel and it
> > > would just work.
> > >
> > > uname:
> > > ------
> > > FreeBSD 9.0-CURRENT #0: Thu May 19 15:01:10 UTC 2011 i386
> > >
> > > I CVSup'ed about fours before then.
> > >
> > >
> > > relevant parts of verbose dmesg:
> > > --------------------------------
> > > found-> vendor=0x1409, dev=0x7168, revid=0x01
> > > domain=0, bus=0, slot=10, func=0
> > > class=07-00-02, hdrtype=0x00, mfdev=0
> > > cmdreg=0x0081, statreg=0x0280, cachelnsz=0 (dwords)
> > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > > intpin=a, irq=3
> > > map[10]: type I/O Port, range 32, base 0xe000, size 5, enabled
> > > map[14]: type I/O Port, range 32, base 0xe400, size 4, enabled
> > > pcib0: matched entry for 0.10.INTA
> > > pcib0: slot 10 INTA hardwired to IRQ 18
> > > [...]
> > > puc0: <Timedia technology 4 Port Serial> port 0xe000-0xe01f,0xe400-0xe40f
> > > irq 18 at device 10.0 on pci0
> > > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 52
> > > uart2: <16550 or compatible> on puc0
> > > uart2: fast interrupt
> > > uart3: <16550 or compatible> on puc0
> > > uart3: fast interrupt
> > >
> > >
> > > I can provide a full verbose dmesg if required, together with any other
> > > information which may be relevant.
> > >
> > > Any and all help gratefully received.
> >
> > Hmm, for Timedia it looks like the puc(4) driver uses the subvendor device ID
> > to figure out how many ports your card has, but it does see 4 ports (the
> > device descrption is correct). Does 'devinfo -v' show any other child
> > devices of 'puc0' besides the two uart devices?
>
> No.
>
> puc0 pnpinfo vendor=0x1409 device=0x7168 subvendor=0x1409 subdevice=0x4056 class=0x070002 at slot=10 function=0
> uart2
> uart3
>
> (If you want the complete output of devinfo just ask - I assumed from
> your question you only wanted the puc-releated section.)
Yeah, this is all I wanted. Hmm, so from the description we can see that
it thinks you have 4 ports:
snprintf(desc, sizeof(desc),
"Timedia technology %d Port Serial", (int)sc->sc_cfg_data);
and the code that sets sc_cfg_data sets it to the number of supported ports
that PUC_CFG_GET_NPORTS returns:
case PUC_CFG_GET_NPORTS:
...
if (subdev == subdevs[dev].ids[id]) {
sc->sc_cfg_data = subdevs[dev].ports;
*res = sc->sc_cfg_data;
return (0);
}
You might need to just add some printfs to puc_bfe_attach(). It would be good
to see if the PUC_CFG_GET_NPORTS request in attach also returned 4 in res (the
description string is set in puc_bfe_probe()).
> BTW I saw the patch for puc(4) you just posted to current@. Is it worth
> me trying that?
That patch is just cosmetic. It would be nice to have it tested, but it
won't fix your bug.
--
John Baldwin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201105240755.38404.jhb>