From owner-svn-src-all@FreeBSD.ORG Wed May 20 02:18:27 2009 Return-Path: Delivered-To: svn-src-all@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EB149106564A; Wed, 20 May 2009 02:18:26 +0000 (UTC) (envelope-from yongari@FreeBSD.org) Received: from svn.freebsd.org (svn.freebsd.org [IPv6:2001:4f8:fff6::2c]) by mx1.freebsd.org (Postfix) with ESMTP id D5F588FC0C; Wed, 20 May 2009 02:18:26 +0000 (UTC) (envelope-from yongari@FreeBSD.org) Received: from svn.freebsd.org (localhost [127.0.0.1]) by svn.freebsd.org (8.14.3/8.14.3) with ESMTP id n4K2IQFK016010; Wed, 20 May 2009 02:18:26 GMT (envelope-from yongari@svn.freebsd.org) Received: (from yongari@localhost) by svn.freebsd.org (8.14.3/8.14.3/Submit) id n4K2IQZ3016008; Wed, 20 May 2009 02:18:26 GMT (envelope-from yongari@svn.freebsd.org) Message-Id: <200905200218.n4K2IQZ3016008@svn.freebsd.org> From: Pyun YongHyeon Date: Wed, 20 May 2009 02:18:26 +0000 (UTC) To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-7@freebsd.org X-SVN-Group: stable-7 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: Subject: svn commit: r192413 - in stable/7/sys: . contrib/pf dev/age dev/ath/ath_hal dev/cxgb X-BeenThere: svn-src-all@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "SVN commit messages for the entire src tree \(except for " user" and " projects" \)" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 20 May 2009 02:18:28 -0000 Author: yongari Date: Wed May 20 02:18:26 2009 New Revision: 192413 URL: http://svn.freebsd.org/changeset/base/192413 Log: MFC r190499: o Don't access VPD even if hardware advertised the capability. It seems that some revision of controller hang while accessing the VPD. Because VPD access routine are unused, nuke it. o Let TWSI reload EEPROM if VPD capability is detected. Reloading EEPROM will also set ethernet address so age(4) now reads AGE_PAR0 and AGE_PAR1 register to get ethernet address. This removes a lot of hack and enhance readability a lot. o Double PHY reset timeout as it takes more time to take PHY out of power-saving state. o Explicitly check power-saving state by checking undocumented PHY registers. If link is not up, poke undocumented registers to take PHY out of power-saving state. This is the same way what Linux does. On resume, make sure to wake up PHY. o Don't rely on auto-clearing feature of master reset bit, just wait 1ms and check idle status of MAC. o Add PCI device revision information in bootverbose mode. This should fix occasional controller hang in device attach phase. Reported by: barbara < barbara.xxx1975 at libero DOT it > Tested by: barbara < barbara.xxx1975 at libero DOT it > Modified: stable/7/sys/ (props changed) stable/7/sys/contrib/pf/ (props changed) stable/7/sys/dev/age/if_age.c stable/7/sys/dev/age/if_agereg.h stable/7/sys/dev/ath/ath_hal/ (props changed) stable/7/sys/dev/cxgb/ (props changed) Modified: stable/7/sys/dev/age/if_age.c ============================================================================== --- stable/7/sys/dev/age/if_age.c Wed May 20 02:13:01 2009 (r192412) +++ stable/7/sys/dev/age/if_age.c Wed May 20 02:18:26 2009 (r192413) @@ -106,8 +106,6 @@ static int age_miibus_writereg(device_t, static void age_miibus_statchg(device_t); static void age_mediastatus(struct ifnet *, struct ifmediareq *); static int age_mediachange(struct ifnet *); -static int age_read_vpd_word(struct age_softc *, uint32_t, uint32_t, - uint32_t *); static int age_probe(device_t); static void age_get_macaddr(struct age_softc *); static void age_phy_reset(struct age_softc *); @@ -321,29 +319,6 @@ age_mediachange(struct ifnet *ifp) } static int -age_read_vpd_word(struct age_softc *sc, uint32_t vpdc, uint32_t offset, - uint32_t *word) -{ - int i; - - pci_write_config(sc->age_dev, vpdc + PCIR_VPD_ADDR, offset, 2); - for (i = AGE_TIMEOUT; i > 0; i--) { - DELAY(10); - if ((pci_read_config(sc->age_dev, vpdc + PCIR_VPD_ADDR, 2) & - 0x8000) == 0x8000) - break; - } - if (i == 0) { - device_printf(sc->age_dev, "VPD read timeout!\n"); - *word = 0; - return (ETIMEDOUT); - } - - *word = pci_read_config(sc->age_dev, vpdc + PCIR_VPD_DATA, 4); - return (0); -} - -static int age_probe(device_t dev) { struct age_dev *sp; @@ -368,8 +343,8 @@ age_probe(device_t dev) static void age_get_macaddr(struct age_softc *sc) { - uint32_t ea[2], off, reg, word; - int vpd_error, match, vpdc; + uint32_t ea[2], reg; + int i, vpdc; reg = CSR_READ_4(sc, AGE_SPI_CTRL); if ((reg & SPI_VPD_ENB) != 0) { @@ -378,123 +353,114 @@ age_get_macaddr(struct age_softc *sc) CSR_WRITE_4(sc, AGE_SPI_CTRL, reg); } - vpd_error = 0; - ea[0] = ea[1] = 0; - if ((vpd_error = pci_find_extcap(sc->age_dev, PCIY_VPD, &vpdc)) == 0) { + if (pci_find_extcap(sc->age_dev, PCIY_VPD, &vpdc) == 0) { /* - * PCI VPD capability exists, but it seems that it's - * not in the standard form as stated in PCI VPD - * specification such that driver could not use - * pci_get_vpd_readonly(9) with keyword 'NA'. - * Search VPD data starting at address 0x0100. The data - * should be used as initializers to set AGE_PAR0, - * AGE_PAR1 register including other PCI configuration - * registers. + * PCI VPD capability found, let TWSI reload EEPROM. + * This will set ethernet address of controller. */ - word = 0; - match = 0; - reg = 0; - for (off = AGE_VPD_REG_CONF_START; off < AGE_VPD_REG_CONF_END; - off += sizeof(uint32_t)) { - vpd_error = age_read_vpd_word(sc, vpdc, off, &word); - if (vpd_error != 0) - break; - if (match != 0) { - switch (reg) { - case AGE_PAR0: - ea[0] = word; - break; - case AGE_PAR1: - ea[1] = word; - break; - default: - break; - } - match = 0; - } else if ((word & 0xFF) == AGE_VPD_REG_CONF_SIG) { - match = 1; - reg = word >> 16; - } else + CSR_WRITE_4(sc, AGE_TWSI_CTRL, CSR_READ_4(sc, AGE_TWSI_CTRL) | + TWSI_CTRL_SW_LD_START); + for (i = 100; i > 0; i--) { + DELAY(1000); + reg = CSR_READ_4(sc, AGE_TWSI_CTRL); + if ((reg & TWSI_CTRL_SW_LD_START) == 0) break; } - if (off >= AGE_VPD_REG_CONF_END) - vpd_error = ENOENT; - if (vpd_error == 0) { - /* - * Don't blindly trust ethernet address obtained - * from VPD. Check whether ethernet address is - * valid one. Otherwise fall-back to reading - * PAR register. - */ - ea[1] &= 0xFFFF; - if ((ea[0] == 0 && ea[1] == 0) || - (ea[0] == 0xFFFFFFFF && ea[1] == 0xFFFF)) { - if (bootverbose) - device_printf(sc->age_dev, - "invalid ethernet address " - "returned from VPD.\n"); - vpd_error = EINVAL; - } - } - if (vpd_error != 0 && (bootverbose)) - device_printf(sc->age_dev, "VPD access failure!\n"); + if (i == 0) + device_printf(sc->age_dev, + "reloading EEPROM timeout!\n"); } else { if (bootverbose) device_printf(sc->age_dev, "PCI VPD capability not found!\n"); } - /* - * It seems that L1 also provides a way to extract ethernet - * address via SPI flash interface. Because SPI flash memory - * device of different vendors vary in their instruction - * codes for read ID instruction, it's very hard to get - * instructions codes without detailed information for the - * flash memory device used on ethernet controller. To simplify - * code, just read AGE_PAR0/AGE_PAR1 register to get ethernet - * address which is supposed to be set by hardware during - * power on reset. - */ - if (vpd_error != 0) { - /* - * VPD is mapped to SPI flash memory or BIOS set it. - */ - ea[0] = CSR_READ_4(sc, AGE_PAR0); - ea[1] = CSR_READ_4(sc, AGE_PAR1); - } - - ea[1] &= 0xFFFF; - if ((ea[0] == 0 && ea[1] == 0) || - (ea[0] == 0xFFFFFFFF && ea[1] == 0xFFFF)) { - device_printf(sc->age_dev, - "generating fake ethernet address.\n"); - ea[0] = arc4random(); - /* Set OUI to ASUSTek COMPUTER INC. */ - sc->age_eaddr[0] = 0x00; - sc->age_eaddr[1] = 0x1B; - sc->age_eaddr[2] = 0xFC; - sc->age_eaddr[3] = (ea[0] >> 16) & 0xFF; - sc->age_eaddr[4] = (ea[0] >> 8) & 0xFF; - sc->age_eaddr[5] = (ea[0] >> 0) & 0xFF; - } else { - sc->age_eaddr[0] = (ea[1] >> 8) & 0xFF; - sc->age_eaddr[1] = (ea[1] >> 0) & 0xFF; - sc->age_eaddr[2] = (ea[0] >> 24) & 0xFF; - sc->age_eaddr[3] = (ea[0] >> 16) & 0xFF; - sc->age_eaddr[4] = (ea[0] >> 8) & 0xFF; - sc->age_eaddr[5] = (ea[0] >> 0) & 0xFF; - } + ea[0] = CSR_READ_4(sc, AGE_PAR0); + ea[1] = CSR_READ_4(sc, AGE_PAR1); + sc->age_eaddr[0] = (ea[1] >> 8) & 0xFF; + sc->age_eaddr[1] = (ea[1] >> 0) & 0xFF; + sc->age_eaddr[2] = (ea[0] >> 24) & 0xFF; + sc->age_eaddr[3] = (ea[0] >> 16) & 0xFF; + sc->age_eaddr[4] = (ea[0] >> 8) & 0xFF; + sc->age_eaddr[5] = (ea[0] >> 0) & 0xFF; } static void age_phy_reset(struct age_softc *sc) { + uint16_t reg, pn; + int i, linkup; /* Reset PHY. */ CSR_WRITE_4(sc, AGE_GPHY_CTRL, GPHY_CTRL_RST); - DELAY(1000); + DELAY(2000); CSR_WRITE_4(sc, AGE_GPHY_CTRL, GPHY_CTRL_CLR); - DELAY(1000); + DELAY(2000); + +#define ATPHY_DBG_ADDR 0x1D +#define ATPHY_DBG_DATA 0x1E +#define ATPHY_CDTC 0x16 +#define PHY_CDTC_ENB 0x0001 +#define PHY_CDTC_POFF 8 +#define ATPHY_CDTS 0x1C +#define PHY_CDTS_STAT_OK 0x0000 +#define PHY_CDTS_STAT_SHORT 0x0100 +#define PHY_CDTS_STAT_OPEN 0x0200 +#define PHY_CDTS_STAT_INVAL 0x0300 +#define PHY_CDTS_STAT_MASK 0x0300 + + /* Check power saving mode. Magic from Linux. */ + age_miibus_writereg(sc->age_dev, sc->age_phyaddr, MII_BMCR, BMCR_RESET); + for (linkup = 0, pn = 0; pn < 4; pn++) { + age_miibus_writereg(sc->age_dev, sc->age_phyaddr, ATPHY_CDTC, + (pn << PHY_CDTC_POFF) | PHY_CDTC_ENB); + for (i = 200; i > 0; i--) { + DELAY(1000); + reg = age_miibus_readreg(sc->age_dev, sc->age_phyaddr, + ATPHY_CDTC); + if ((reg & PHY_CDTC_ENB) == 0) + break; + } + DELAY(1000); + reg = age_miibus_readreg(sc->age_dev, sc->age_phyaddr, + ATPHY_CDTS); + if ((reg & PHY_CDTS_STAT_MASK) != PHY_CDTS_STAT_OPEN) { + linkup++; + break; + } + } + age_miibus_writereg(sc->age_dev, sc->age_phyaddr, MII_BMCR, + BMCR_RESET | BMCR_AUTOEN | BMCR_STARTNEG); + if (linkup == 0) { + age_miibus_writereg(sc->age_dev, sc->age_phyaddr, + ATPHY_DBG_ADDR, 0); + age_miibus_writereg(sc->age_dev, sc->age_phyaddr, + ATPHY_DBG_DATA, 0x124E); + age_miibus_writereg(sc->age_dev, sc->age_phyaddr, + ATPHY_DBG_ADDR, 1); + reg = age_miibus_readreg(sc->age_dev, sc->age_phyaddr, + ATPHY_DBG_DATA); + age_miibus_writereg(sc->age_dev, sc->age_phyaddr, + ATPHY_DBG_DATA, reg | 0x03); + /* XXX */ + DELAY(1500 * 1000); + age_miibus_writereg(sc->age_dev, sc->age_phyaddr, + ATPHY_DBG_ADDR, 0); + age_miibus_writereg(sc->age_dev, sc->age_phyaddr, + ATPHY_DBG_DATA, 0x024E); + } + +#undef ATPHY_DBG_ADDR +#undef ATPHY_DBG_DATA +#undef ATPHY_CDTC +#undef PHY_CDTC_ENB +#undef PHY_CDTC_POFF +#undef ATPHY_CDTS +#undef PHY_CDTS_STAT_OK +#undef PHY_CDTS_STAT_SHORT +#undef PHY_CDTS_STAT_OPEN +#undef PHY_CDTS_STAT_INVAL +#undef PHY_CDTS_STAT_MASK } static int @@ -539,7 +505,8 @@ age_attach(device_t dev) sc->age_chip_rev = CSR_READ_4(sc, AGE_MASTER_CFG) >> MASTER_CHIP_REV_SHIFT; if (bootverbose) { - device_printf(dev, "PCI device revision : 0x%04x\n", sc->age_rev); + device_printf(dev, "PCI device revision : 0x%04x\n", + sc->age_rev); device_printf(dev, "Chip id/revision : 0x%04x\n", sc->age_chip_rev); } @@ -1524,6 +1491,9 @@ age_resume(device_t dev) cmd &= ~0x0400; pci_write_config(sc->age_dev, PCIR_COMMAND, cmd, 2); } + AGE_UNLOCK(sc); + age_phy_reset(sc); + AGE_LOCK(sc); ifp = sc->age_ifp; if ((ifp->if_flags & IFF_UP) != 0) age_init_locked(sc); @@ -2544,14 +2514,8 @@ age_reset(struct age_softc *sc) int i; CSR_WRITE_4(sc, AGE_MASTER_CFG, MASTER_RESET); - for (i = AGE_RESET_TIMEOUT; i > 0; i--) { - DELAY(1); - if ((CSR_READ_4(sc, AGE_MASTER_CFG) & MASTER_RESET) == 0) - break; - } - if (i == 0) - device_printf(sc->age_dev, "master reset timeout!\n"); - + CSR_READ_4(sc, AGE_MASTER_CFG); + DELAY(1000); for (i = AGE_RESET_TIMEOUT; i > 0; i--) { if ((reg = CSR_READ_4(sc, AGE_IDLE_STATUS)) == 0) break; Modified: stable/7/sys/dev/age/if_agereg.h ============================================================================== --- stable/7/sys/dev/age/if_agereg.h Wed May 20 02:13:01 2009 (r192412) +++ stable/7/sys/dev/age/if_agereg.h Wed May 20 02:18:26 2009 (r192413) @@ -91,6 +91,9 @@ #define AGE_SPI_OP_READ 0x217 /* 8bits */ #define AGE_TWSI_CTRL 0x218 +#define TWSI_CTRL_SW_LD_START 0x00000800 +#define TWSI_CTRL_HW_LD_START 0x00001000 +#define TWSI_CTRL_LD_EXIST 0x00400000 #define AGE_DEV_MISC_CTRL 0x21C