Date: Tue, 4 May 1999 22:24:11 +0100 From: Jason Aley <jason@southchurch.demon.co.uk> To: freebsd-stable@FreeBSD.org Subject: freebsd wont reboot! Message-ID: <19990504222411.A9168@southchurch.demon.co.uk>
next in thread | raw e-mail | index | archive | help
hi,
hope this is the right list to post this to, i have just upgraded to 3.1 after a long time following 2.x stable, after installing and building a new kernel i find that the reboot and shutdown commands no longer work!, the 3 finger sulute does work, but i need to administer this box remotly so i need the reboot or shutdown commands to work! however if i boot with the generic kernal all's fine! the machine is a p100 running adaptec 1545 adaptor scsi hd and cdrom, below is my kernel config and an output of dmeg, i hope this is enough info.
machine "i386"
#cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
#cpu "I686_CPU"
ident MYKERNEL
maxusers 64
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MFS_ROOT #MFS usable as root device, "MFS" req'ed
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=5000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
config kernel root on da0
controller isa0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
options "CMD640" # work around CMD640 chip deficiency
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0
controller dpt0
controller aha0 at isa? port ? cam irq ?
controller scbus0
device da0
device da1
device cd0 #Only need one of these, the code dynamically grows
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device vga0 at isa? port ? conflicts
pseudo-device splash
device sc0 at isa? tty
device npx0 at isa? port IO_NPX irq 13
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
device ppc0 at isa? port? net irq 7
controller ppbus0
device nlpt0 at ppbus?
device ppi0 at ppbus?
device rl0
device ed0 at isa? port 0x600 net irq 11 iomem 0xd8000
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
options KTRACE #kernel tracing
options SYSVSHM
options SYSVMSG
#pseudo-device bpfilter 4 #Berkeley packet filter
-- dmesg--
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #0: Tue May 4 18:02:57 GMT 1999
root@monster.gamera.org:/usr/src/sys/compile/GAMERA
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 100227781 Hz
CPU: AMD K5 model 0 (100.23-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x501 Stepping=1
Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory = 67108864 (65536K bytes)
avail memory = 62492672 (61028K bytes)
Preloaded elf kernel "kernel" at 0xf029c000.
Probing for devices on PCI bus 0:
chip0: <Intel 82439> rev 0x03 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
vga0: <Cirrus Logic GD5446 SVGA controller> rev 0x00 int a irq 9 on pci0.9.0
ed1: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 11 on pci0.11.0
ed1: address 00:20:18:52:92:b4, type NE2000 (16 bit)
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x600
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdreset: error1: 0x0
wdreset: error1: 0x0
wdc0 not found at 0x1f0
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
aha0 at 0x330-0x333 irq 10 drq 7 on isa
aha0: AHA-1542CP FW Rev. D.0 (ID=46) SCSI Host Adapter, SCSI ID 7, 16 CCBs
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 5 seconds for SCSI devices to settle
changing root device to da0s1a
da1 at aha0 bus 0 target 3 lun 0
da1: <IBM DSAS-3540 S47W> Fixed Direct Access SCSI-2 device
da1: 5.0MB/s transfers (5.0MHz, offset 8)
da1: 522MB (1070496 512 byte sectors: 64H 32S/T 522C)
da0 at aha0 bus 0 target 0 lun 0
da0: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device
da0: 5.0MB/s transfers (5.0MHz, offset 8)
da0: 4357MB (8925000 512 byte sectors: 64H 32S/T 4357C)
cd0 at aha0 bus 0 target 5 lun 0
cd0: <SONY CD-ROM CDU-76S 1.1a> Removable CD-ROM SCSI-2 device
cd0: 3.333MB/s transfers (3.333MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
hope thats not too much info!
--
jason
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990504222411.A9168>