From owner-freebsd-scsi Fri Mar 3 12: 3:55 2000 Delivered-To: freebsd-scsi@freebsd.org Received: from heras.host4u.net (heras.host4u.net [209.150.128.13]) by hub.freebsd.org (Postfix) with ESMTP id 6F14637B64E for ; Fri, 3 Mar 2000 12:03:47 -0800 (PST) (envelope-from mike@rockatronic.com) Received: from mobile (cr42910-a.slnt1.on.wave.home.com [24.114.50.29]) by heras.host4u.net (8.8.5/8.8.5) with SMTP id OAA27827 for ; Fri, 3 Mar 2000 14:03:36 -0600 Message-ID: <009001bf853d$4f49d040$3517390a@localdomain> From: "Mike" To: Subject: Adaptec AHA2930CU / AIC7859 failure Date: Fri, 3 Mar 2000 13:21:28 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello all, I've had no success getting a recent vintage North American market Adaptec 2930CU to work. I've CVSuped and tried both the v.3 stable and 4 current source trees. Nothing works. Just times out on probe (dmesg below). The card works fine with Redhat Linux 6.1 and Windows 98. Its not a cabling or term. problem as the other OSes work and the errors remain identical whether there is an external cable and/or device attached or not. There is no internal device. I've tried manual term. as well. I called Adaptec to confirm the controller chip; they say AIC7859 BT. Read the sources, seems to jibe OK, as in AIC7859. Note, on probe Linux loads the AIC7860 not 7859. I tried substituting the 7850, 7855,7860 and 7870 by modifiying the features line in the setup routine for 2930CU in aic7xxx.h. Recompile, test. etc. etc. No success. Also tried all reasonable permutations on Adaptec SCSI setup (ctrl-a) just for "fun". No success. Any insight would be greatly appreciated. Thanks Mike FreeBSD 3.4-STABLE #0: Fri Mar 3 08:54:33 EST 2000 root@stang.localdomain:/usr/src/sys/compile/STANG Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (232.96-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping = 3 Features=0x8001bf real memory = 67108864 (65536K bytes) avail memory = 61747200 (60300K bytes) Preloaded elf kernel "kernel" at 0xc035c000. Probing for devices on PCI bus 0: chip0: rev 0x01 on pci0.0.0 chip1: rev 0x01 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip2: rev 0x01 on pci0.7.3 vga0: <3Dfx Voodoo 3 graphics accelerator> rev 0x01 int a irq 0 on pci0.8.0 vr0: rev 0x06 int a irq 10 on pci0.10.0 vr0: Ethernet address: 00:50:ba:c2:a1:73 vr0: autoneg complete, link status good (half-duplex, 100Mbps) ahc0: rev 0x03 int a irq 11 on pci0.11.0 ahc0: aic7859 Single Channel A, SCSI Id=7, 3/255 SCBs Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 fe0 not found at 0x300 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model IntelliMouse, device ID 3 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 4884MB (10003392 sectors), 9924 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, accel, dma, iordy acd0: drive speed 171 - 8593KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA, packet track acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked wt0 not found at 0x300 mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 ie0: unknown board_id: f000 ie0 not found at 0x300 ep0 not found at 0x300 ex0 not found le0 not found at 0x300 lnc0 not found at 0x280 cs0 not found at 0x300 ze0 not found at 0x300 zp0 not found at 0x300 adv0 not found at 0x330 bt0 not found at 0x134 aha0 not found at 0x134 aic0 not found vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Intel Pentium detected, installing workaround for F00F bug Waiting 8 seconds for SCSI devices to settle (probe1:ahc0:0:1:0): SCB 0xd - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe1:ahc0:0:1:0): Queuing a BDR SCB (probe1:ahc0:0:1:0): SCB 0xd - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe1:ahc0:0:1:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 6 SCBs aborted (probe2:ahc0:0:2:0): SCB 0xd - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe2:ahc0:0:2:0): Queuing a BDR SCB (probe2:ahc0:0:2:0): SCB 0xd - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe2:ahc0:0:2:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 6 SCBs aborted (probe3:ahc0:0:3:0): SCB 0xd - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe3:ahc0:0:3:0): Queuing a BDR SCB (probe3:ahc0:0:3:0): SCB 0xd - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe3:ahc0:0:3:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 6 SCBs aborted (probe5:ahc0:0:5:0): SCB 0x8 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe5:ahc0:0:5:0): Queuing a BDR SCB (probe5:ahc0:0:5:0): SCB 0x8 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe5:ahc0:0:5:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 5 SCBs aborted (probe1:ahc0:0:1:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe1:ahc0:0:1:0): Queuing a BDR SCB (probe1:ahc0:0:1:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe1:ahc0:0:1:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 4 SCBs aborted (probe3:ahc0:0:3:0): SCB 0x9 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe3:ahc0:0:3:0): Queuing a BDR SCB (probe3:ahc0:0:3:0): SCB 0x9 - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe3:ahc0:0:3:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 3 SCBs aborted (probe1:ahc0:0:1:0): SCB 0xb - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe1:ahc0:0:1:0): Queuing a BDR SCB (probe1:ahc0:0:1:0): SCB 0xb - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe1:ahc0:0:1:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 2 SCBs aborted (probe3:ahc0:0:3:0): SCB 0xb - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe3:ahc0:0:3:0): Queuing a BDR SCB (probe3:ahc0:0:3:0): SCB 0xb - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe3:ahc0:0:3:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 2 SCBs aborted (probe1:ahc0:0:1:0): SCB 0xb - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe1:ahc0:0:1:0): Queuing a BDR SCB (probe1:ahc0:0:1:0): SCB 0xb - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe1:ahc0:0:1:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 2 SCBs aborted (probe1:ahc0:0:1:0): SCB 0xa - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe1:ahc0:0:1:0): Queuing a BDR SCB (probe1:ahc0:0:1:0): SCB 0xa - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0x188 (probe1:ahc0:0:1:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 1 SCBs aborted changing root device to wd0s2a To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message