Copyright (c) 1992-2000 The FreeBSD=20 Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, = 1992, 1993,=20 1994
The Regents of the University of California. All rights=20 reserved.
FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT=20 2000
jkh@be= nto.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter=20 "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II = Xeon/Celeron=20 (267.60-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id = =3D=20 0x634 Stepping =3D 4
=20 Features=3D0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC= A,CMOV,MMX>
real=20 memory =3D 268419072 (262128K bytes)
config> di = sn0
config> di=20 lnc0
config> di ie0
config> di fe0
config> di=20 ed0
config> di cs0
config> di bt0
config> di=20 aic0
config> di aha0
config> di adv0
config> = q
avail memory=20 =3D 257069056 (251044K bytes)
Preloaded elf kernel "kernel" at=20 0xc0436000.
Preloaded userconfig_script "/boot/kernel.conf" at=20 0xc043609c.
Pentium Pro MTRR support enabled
md0: Malloc = disk
npx0:=20 <math processor> on motherboard
npx0: INT 16 = interface
pcib0:=20 <Host to PCI bridge> on motherboard
pci0: <PCI bus> on=20 pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> = at=20 device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia = GeForce2 GTS graphics accelerator> at 0.0 irq 11
isab0: <VIA = 82C596B=20 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on=20 isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xd800-0xd80f = at=20 device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 = irq 15=20 on atapci0
uhci0: <VIA 83C572 USB controller> port = 0xd400-0xd41f irq 10=20 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on=20 uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, = rev=20 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self = powered
ums0:=20 Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.14, addr 2, = iclass=20 3/1
ums0: 5 buttons and Z dir.
pci0: <unknown card> = (vendor=3D0x1102,=20 dev=3D0x0002) at 9.0
pci0: <unknown card> (vendor=3D0x1102, = dev=3D0x7002) at=20 9.1
fxp0: <Intel Pro 10/100B/100+ Ethernet> at device 13.0 on=20 pci0
fxp0: could not map memory
device_probe_and_attach: fxp0 = attach=20 returned 6
pcib1: <Host to PCI bridge> on motherboard
pci2: = <PCI=20 bus> on pcib1
fdc0: <NEC 72065B or clone> at port = 0x3f0-0x3f5,0x3f7=20 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: = <1440-KB=20 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller = (i8042)>=20 at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 = on=20 atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port = 0x3c0-0x3df=20 iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags = 0x100 on=20 isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at = port=20 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at = port=20 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel = port> at=20 port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset = (ECP/EPP/PS2/NIBBLE) in=20 COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: = IEEE1284=20 device found /NIBBLE/ECP
Probing for PnP devices on = ppbus0:
ppbus0:=20 <HEWLETT-PACKARD DESKJET 640C> MLC,PCL,PML
plip0: <PLIP = network=20 interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0:=20 Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio4: = <U.S.=20 Robotics 56K Voice INT> at port 0x3e8-0x3ef irq 5 on isa0
sio4: = type=20 16550A
ad0: 14324MB <QUANTUM FIREBALLlct10 15> [29104/16/63] at = ata0-master UDMA66
afd0: 239MB <IOMEGA ZIP 250 ATAPI Floppy>=20 [239/64/32] at ata0-slave using PIO3
acd0: CDROM <SONY CD-ROM = CDU4821>=20 at ata1-master using PIO4
acd1: CD-RW <Hewlett-Packard CD-Writer = Plus=20 8200> at ata1-slave using PIO4
Mounting root from=20 ufs:/dev/ad0s2a