Date: Sat, 19 Jun 1999 15:55:42 -0500 (EST) From: Alfred Perlstein <bright@rush.net> To: "Brian's Mail" <bellefso@execpc.com> Cc: FreeBSD Questions <freebsd-questions@FreeBSD.ORG> Subject: Re: Performance Tuning Message-ID: <Pine.BSF.3.96.990619154547.14320O-100000@cygnus.rush.net> In-Reply-To: <NCBBLDHPCJFJEDOEPEBFGEDFCNAA.bellefso@execpc.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 19 Jun 1999, Brian's Mail wrote:
> Hello,
>
> I would like to find some tips/info on tuning a server for web and ftp
> performance. I currently have a machine with a PII 300, 256 MB RAM, a
> Netgear FA310TX network card and an adaptec 2940 UW controller. I can only
--^^^^^^^^^^^^^^^
augh!
> get about 2500 K/sec over a 100 MB network. The machine is connected to a
> Linksys 10/100 rackmount hub. I think that I should be able to do better
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
double augh!
> than this without a problem. If there are any links or other information I
> would be extremely grateful.
no wonder, combine cheap network hardware with a cheap hub....
If you want real performance grab a Intel EtherExpress Pro card,
or a 3com card (as a second choice).
Ditch the hub, hubs only give you half duplex, basically you
can't transmit and send at the same time, this can kill performance,
pick up a switch, preferably a cisco or 3com, maybe even a Bay, but
I've heard bad things about Bay.
At home on my machines all Intel NICs i can get over 10MB/sec,
it's worth the extra 30-40$ for both speed and reliability.
(I have a Hawking 8port 100mbit switch, but I wouldn't recommend
it as it sometimes doens't comeback from a power cycles unless
I cycle it many times... blech, then again it was only 219$)
In production we use Intel cards almost exclusively along with
cisco switches.
-Alfred Perlstein - [bright@rush.net|bright@wintelcom.net]
systems administrator and programmer
Win Telecom - http://www.wintelcom.net/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.990619154547.14320O-100000>