Date: 06 Mar 1999 23:17:52 +0100 From: Eric Jacoboni <jaco@titine.fr.eu.org> To: "Mark S. Reichman" <mark@borg.com> Cc: "emmanuel.m.naval.1" <shwim@purdue.edu>, freebsd-questions@FreeBSD.ORG Subject: Re: IOmega Parallel Port Zip Drive and FreeBSD... Message-ID: <87r9r2w9db.fsf@titine.fr.eu.org> In-Reply-To: "Mark S. Reichman"'s message of "Sat, 06 Mar 1999 15:18:36 -0500" References: <Pine.SOL.3.96.990304183154.20985A-100000@herald.cc.purdue.edu> <36E18D9C.9BBA57D7@borg.com>
next in thread | previous in thread | raw e-mail | index | archive | help
"Mark S. Reichman" <mark@borg.com> writes:
> Well I am using 3.1-Stable.
I'm using 3.1-RELEASE
> /usr/src/sys/i386/conf/GENERIC or LINT
>
> # Parallel port
> device ppc0 at isa? port? net irq 7
> controller ppbus0
> device nlpt0 at ppbus?
> device plip0 at ppbus?
> device ppi0 at ppbus?
> #controller vpo0 at ppbus?
/usr/src/sys/i386/conf/MON_NOYAU :
# Parallel port
device ppc0 at isa? port? net irq 7
controller ppbus0
device nlpt0 at ppbus?
#device plip0 at ppbus?
#device ppi0 at ppbus?
controller vpo0 at ppbus?
I've make a :
# cd /dev
# ./MAKEDEV da0
But :
# mount -t msdos /dev/da0s4 /zip
msdos: /dev/da0s4: Device not configured
Relevant output of 'dmesg' :
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 890C> PCL,MLC,PML
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus 0
vpo0: EPP 1.9 mode
...
Waiting 2 seconds for SCSI devices to settle
...
Nothing about da0...
Any ideas ?
--
---------------------------------------------------
Éric Jacoboni « No sport! » (W. Churchill)
---------------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?87r9r2w9db.fsf>